应力波与可滑移岩石界面间的相互作用研究

研究了应力波与用节理刚度系数描述的线性滑移岩石界面间的相互作用，给出了其透、反射波幅的一般表达式。通过应力波垂直人射界面时的具体分析，反映出岩石界面的节理刚度对应力波传播的重要影响，并揭示了岩石界面对应力波的高频滤波作用。     

巷道围岩松动圈的地质雷达探测及应用

在简述地质雷达探测原理的基础上, 分析了巷道围岩松动圈雷达探测的可行性。结合华丰矿巷道围岩松动圈探测实例, 提出了松动圈雷达探测方法、图像分析及探测结果应用。结果表明, 采用地质雷达探测巷道围岩松动圈是可行的, 可以用于指导巷道围岩的锚杆支护设计。     

地—空界面天然中子辐射场的扰动及其环境意义

介绍了地—空界面天然中子流的来源和轻便型天然中子流测量仪器。论述了地—空界面天然中子辐射场的扰动。理论与长期观测表明,在地—空界面上天然中子流注量率随高程的增加而呈指数规律增加,而在近地表(20m内)却随距地面高度的增加而呈指数规律减少;天然中子流注量率与大气压力呈负相关关系,气压系数为(-0.060～-0.064)中子计数/30min/kPa;地—空界面天然中子流的纬度效应与高空中更显著;天然中子流注量率异常与气象的变化密切相关;地表介质的含水率增高,则地—空界面上升快中子流明显降低。通过对地一空界面天然中子流测量,可以揭示气象的瞬态变化、确定地表介质的含水率的关系,以及在地震预报与环境电离辐射评价方面具有重要的科学意义与实用价值。     

通用洪水预报模型库设计建设研究

在介绍洪水预报模型库的基本概念和性质的基础上，分析了各类洪水预报模型的输入、输出数据类型，规定了各类数据文件格式，设计了洪水预报模型库的通用数据接口，并在中国洪水预报系统中实现了通用洪水预报模型库的建设。     

夏季红枫湖地区农田土壤-大气界面汞交换通量的初步研究

采用动力学通量箱法(Dynamic Flux Chamber)与高时间分辨率大气测汞仪联用技术对贵州红枫湖地区土壤-大气界面间汞交换通量进行了初步研究.结果显示,红枫湖地区土壤-大气界面间汞交换通量变化范围为-8.6 ng～215.3 ng@m-2@h-1,平均27.4士40.1 ng/m2@h(n=255);且土壤与大气界面间的汞交换是双向的既有土壤汞的释放,又有大气汞的沉降,主要以土壤汞的释放为主(n释放=253,n沉降=2n).土壤汞的释放通量与土壤温度、气温、光照强度有强相关关系,相关系数分别为0.80、0.83、0.74.     

In the Critical Zone: Geography at the U.S. Geological Survey

Geography is again becoming an integral part of the premier natural‐science agency of the federal government. Geographic research emphasizes the surface of the earth, a portion of the earth system that the U.S. Geological Survey (USGS) defines as the “critical zone.” Although geography was part of the USGS from the creation of the agency, in recent years geography in the agency has largely been limited to topographic mapping. Recently, the USGS and an advisory committee of the National Research Council (NRC) reviewed the role of geography at the Survey. The committee's report, along with ongoing decision‐making in the federal government, is likely to reshape geography in the USGS. The newly defined USGS has a regional structure and four disciplines: geology, hydrology, biology, and geography. The NRC report emphasizes the need for the creation of a spatial database called the National Map to replace the existing series of paper topographic maps. The report also outlines the need for geographic research in geographic information science (GIScience), nature‐society connections, and bridging of science to decision‐making. The NRC report has been briefed throughout the USGS, in the federal executive branch, and in Congress. The changing role for geography in the USGS requires change in the agency culture, revised budgetary decisions, and the establishment of a long‐term core agenda for research. Academic geographers will need to prepare a new generation of geographers for participation in the USGS and similar agencies.     

Numerical Modeling of Basin-Range Tectonics Related to Continent-Continent Collision

Continent-continent collision is the most important driving mechanism for the occurrence of various geological processes in the continental lithosphere. How to recognize and determine continent-continent collision,especially its four-dimensional temporal-spatial evolution, is a subject that geological communities have long been concerned about and studied. Continent-continent collision is mainly manifested by strong underthrnsting (subduction) of the underlying block along an intracontinental subduction zone and continuous obduction (thrusting propagation) of the overlying block along the intracontinental subduction zone, the occurrence of a basin-range tectonic framework in a direction perpendicular to the subduction zone and the flexure and disruption of the Moho. On the basis of numerical modeling, the authors discuss in detail the couplings between various amounts and rates of displacement caused by basin subsidence, mountain uplift and Moho updoming and downflexure during obduction (thrusting propagation) and subduction and the migration pattern of basin centers. They are probably indications or criteria for judgment or determination of continent-continent collision.     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.     

Enhancement of backtracking search algorithm for identifying soil parameters

In this paper, an enhanced backtracking search algorithm (so-called MBSA-LS) for parameter identification is proposed with two modifications: (a) modifying the mutation of original backtracking search algorithm (BSA) considering the contribution of current best individual for accelerating convergence speed and (b) novelly incorporating an efficient differential evolution (DE) as local search for improving the quality of population. The proposed MBSA-LS is first validated with better performance than the original BSA and some other typical state-of-the-art optimization algorithms on a benchmark of soil parameter identification in terms of effectiveness, efficiency, and robustness. Then, the efficiency of the MBSA-LS is further illustrated by two representative cases: identifying soil parameters from both laboratory tests and field measurements. All comparisons demonstrate that the proposed MBSA-LS algorithm can give accurate results in a short time. Finally, to conveniently solve the problems of parameter identification, a practical tool ErosOpt for parameter identification is developed by integrating the proposed MBSA-LS and some other efficient algorithms for readers to conduct the parameter identification using optimisation algorithms.