TCA2003全站仪在游泳池长度控制中的应用

比赛用游泳馆泳池长度必须满足相应国际标准,对其精度有严格的质量控制。根据日照市游泳馆工程设计的特点及精度要求,提出了运用TCA2003型全站仪对游泳池长度进行全过程长度控制的方法,并进行了精度分析。     

铁路测量中坐标系的建立与转换

在铁路测量中,长度投影变形要求小于2．5cm／km。但是由于铁路为典型的线性工程,通常横跨多个投影带,因此采用国家标准3。带难以满足铁路测量精度要求,本文通过分析高斯投影长度变形,提出分段建立独立坐标系的方法,控制长度投影变形,满足精度要求,最后介绍利用GlobalMapper软件实现两个独立坐标系的转换。     

二塘沟水库施工控制网平面坐标系的建立和观测

通过对二塘沟水库库区地理位置的分析,得出该地区每公里变形值较大,为满足施工放样精度及业主建设水库的进场公路和下一级水库规划使用的要求,根据二塘沟现有的测绘资料,建立了二塘沟水库施工控制网平面坐标系。采用三等GPS网进行观测,通过统计测量精度,得出该测量精度高等优点。     

GCTS空心圆柱扭剪仪反压饱和试验探究

GCTS空心圆柱扭剪仪是研究土体在循环荷载下的主应力轴旋转的理想仪器。如何使用GCTS空心圆柱扭剪仪对软土空心试样进行反压饱和才能使后续试验结果更精确,探究了以GCTS空心圆柱扭剪仪为试验平台,对空心试样进行了反压饱和的试验方法。总结了空心扭剪仪反压饱和的3种加压方式：手动加压、自动加压和连续加压方式。通过一些试验探究了每种加压方式所对应的合理性参数。确定了适合吹填土的压差为15kPa。确定了孔压稳定的标准为：如果孔压在1min内的变化值小于围压和反压之间压力差的5％,则认为孔压稳定。     

Geochemistry of Permian Mafic Igneous Rocks from the Napo‐Qinzhou Tectonic Belt in Southwest Guangxi,Southwest China: Implications for Arc‐Back Arc Basin Magmatic Evolution

The Napo-Qinzhou Tectonic Belt (NQTB) lies at the junction of the Yangtze, Cathaysia and Indochina (North Vietnam) Blocks, which is composed of five major lithotectonic subunits: the Qinzhou-Fangcheng Suture Zone (QFSZ), the Shiwandashan Basin (SB), the Pingxiang-Nanning Suture Zone (PNSZ), the Damingshan Block (DB) and the Babu-Lingma Suture Zone (BLSZ). On the basis of geochemical compositions, the Permian mafic igneous rocks can be divided into three distinct groups: (1) mafic igneous rocks (Group 1) from the Longjing region in the PNSZ and Hurun region in the BLSZ, which are characterized by intermediate Ti, P and Zr with low Ni and Cr contents; (2) mafic igneous rocks (Group 2) from the Naxiao and Chongzuo region in the DB, characterized by low-intermediate Ti, P and Zr with high Ni and Cr concentrations; and (3) mafic igneous rocks (Group 3) from the Siming region in the Jingxi carbonate platform of the northwestern margin of the NQTB, with intermediate-high Ti, P and Zr and low Ni and Cr contents. The Group 1 rocks yield a weighted mean 206Pb/238U age of 250.5±2.8 Ma and are geochemically similar to basalts occurring in back-arc basin settings. The Group 2 rocks exhibit geochemical features to those basalts in island arcs, whereas the Group 3 rocks show geochemical similarity to that of ocean island basalts. All three groups are characterized by relatively low εNd(t) values (–2.61 to +1.10) and high initial 87Sr/86Sr isotopic ratios (0.705309–0.707434), indicating that they were derived from a subduction-modified lithospheric mantle and experienced assimilation, fractional crystallization, and crustal contamination or mixing during magmatic evolution. Accordingly, we propose the existence of an arc-back arc basin system that developed along the NQTB at the border of SW Guangxi Province (SW China) and northern Vietnam, and it was formed by continued northwestward subduction of the Cathaysian (or Yunkai) Block under the Yangtze Block, and northeastward subduction of the Indochina Block beneath the Yangtze Block during Permian time.     

深埋一维导体长度精确检定模拟试验

在岩土工程核算、竣工验收中遇到的锚杆或锚索等深埋一维良导体长度检定时,利用良导体直接充电和旁侧平行成孔(检定孔)电场测量的方式可以精确测量并给出检定结果.理论解析计算和水槽物理模拟试验表明,这种检定方法的测量精度受杆-孔相对距离和平行度的影响小,检定结果受旁侧无关良导体干扰小;在一个检定孔中可以对周围多根检定对象进行长度检测.这种有效的物探检测方法可以推广应用到良导体长度的精确检定中.     

野外大长度量值传递稳定性与可靠性分析

因瓦基线尺是国家野外大长度量值传递的法定标准器,本文通过对一组因瓦基线尺多年的检定资料、基线场的多次测量成果以及与维塞拉光波干涉仪测量成果的比较分析,论述我国野外大长度量值传递的稳定性与可靠性.     

高速铁路精密工程控制测量精度研究

高速铁路轨道控制测量采用精密控制测量技术,采用斜轴墨卡托投影可以避免高斯投影投影带可控范围小,坐标转换和分带计算的问题,对于东西走向的线路能很好地控制投影长度变形。文章以长吉高铁控制测量数据,实现斜轴墨卡托投影,经过其投影精度的探讨,确定斜轴墨卡托投影能满足高铁精密控制测量的精度要求。     

Tall building vibration control using a TM‐MR damper assembly: Experimental results and implementation

This paper summarizes the relevant results of the design, construction, testing, and implementation of a nominal 120 kN magnetorheological damper developed to control a free‐plan tall building in Santiago, Chile, equipped with two 160‐ton tuned masses. Cyclic as well as hybrid simulation tests were performed on the prototype damper. Global building responses using measured MR properties showed good correlation with analytical estimations. Also, a proposed physical controller for the MR damper was validated through hybrid and building pull‐back tests. Its performance is essentially equivalent to that of an LQR controller, but the information needed in its implementation is considerably less. Pull‐back tests of 10 cm amplitude were performed on one mass along the flexible edge of the building and its response controlled using the passive and controlled modes of the MR damper. The MR damper was capable of controlling the TM displacements very effectively, as well as the simulated building response for different ground motions and harmonic excitation. Copyright © 2010 John Wiley & Sons, Ltd.     

基于非因果滤波器的多次波匹配相减方法(英文)

在常规多道匹配滤波方法中的滤波器是物理可实现的因果滤波器,只能实现地震信号序列延迟的滤波。本文提出了最小二乘意义下的非因果多道输入多道输出维纳滤波方法,通过比较多道匹配相减中因果和非因果滤波方法之间的差别,验证了方法的有效性,解决了模型数据滞后于实际数据的情况。而且,通过定义长度随偏移距和层速度变化的滑动时窗,解决了匹配时窗内同相轴数量随偏移距增大而增加的问题。并将上述方法应用到改进的扩展多道匹配相减去除多次波的方法中,利用Pluto1.5理论模拟数据,对非因果滤波器和变长度时窗的匹配相减方法进行测试,取得了很好的去除多次波后的地震数据。