陇东地区水土流失与地质作用初步分析

陇东地区是黄河上游水土流失严重区 ,也是国家重点治理的地区之一。由于特殊的岩土体的存在 ,加重了这一地区水土流失作用的危害性。本文通过水土流失现象与地质作用的关系进行偿试性探讨 ,旨在从中找到防治水土流失的有效措施 ,开展治理工作     

The importance of plant root characteristics in controlling concentrated flow erosion rates

While it has been demonstrated in numerous studies that the aboveground characteristics of the vegetation are of particular importance with respect to soil erosion control, this study argues the importance of separating the influence of vegetation on soil erosion rates into two parts: the impact of leaves and stems (aboveground biomass) and the influence of roots (belowground biomass). Although both plant parameters form inseparable constituents of the total plant organism, most studies attribute the impact of vegetation on soil erosion rates mainly to the characteristics of the aboveground biomass. This triggers the question whether the belowground biomass is of no or negligible importance with respect to soil erosion by concentrated flow. This study tried to answer this question by comparing cross‐sectional areas of concentrated flow channels (rills and ephemeral gullies) in the Belgian Loess Belt for different cereal and grass plant densities. The results of these measurements highlighted the fact that both an increase in shoot density as well as an increase in root density resulted in an exponential decrease of concentrated flow erosion rates. Since protection of the soil surface in the early plant growth stages is crucial with respect to the reduction of water erosion rates, increasing the plant root density in the topsoil could be a viable erosion control strategy. Copyright © 2003 John Wiley & Sons, Ltd.     

Short‐term erosion rates from a 7Be inventory balance

Detailed soil erosion studies bene?t from the ability to quantify the magnitude of erosion over time scales appropriate to the process. An inventory balance for ⁷Be was used to calculate sediment erosion in a 30·73 m² plot during a series of runoff‐producing thunderstorms occurring over three days at the Deep Loess Research Station in Treynor, Iowa, USA. The inventory balance included determination of the pre‐ and post‐storm ⁷Be inventories in the soil, the atmospheric in?ux of ⁷Be during the event, and pro?les of the ⁷Be activity in the soil following the atmospheric deposition. The erosion calculated in the plot using the ⁷Be inventory balance was 0·058 g cm^?2, which is 23 per cent of the annual average erosion determined using ¹³⁷Cs inventories. The calculated erosion from the mass balance is similar to the 0·059 g cm^?2 of erosion estimated from the amount of sediment collected at the outlet of the 6 ha ?eld during the study period and the delivery ratio (0·64). The inventory balance of ⁷Be provides a new means for evaluating soil erosion over the time period most relevant to quantifying the prediction of erosion from runoff. Copyright © 2003 John Wiley & Sons, Ltd.     

Flexure of the Indian plate and intraplate earthquakes

The flexural bulge in central India resulting from India's collision with Tibet has a wavelength of approximately 670 km. It is manifest topographically and in the free-air gravity anomaly and the geoid. Calculations of the stress distribution within a flexed Indian plate reveal spatial variations throughout the depth of the plate and also a function of distance from the Himalaya. The wavelength (and therefore local gradient) of stress variation is a function of the effective elastic thickness of the plate, estimates of which have been proposed to lie in the range 40–120 km. The imposition of this stress field on the northward moving Indian plate appears fundamental to explaining the current distribution of intraplate earthquakes and their mechanisms. The current study highlights an outer trough south of the flexural bulge in central India where surface stresses are double the contiguous compressional stresses to the north and south. The Bhuj, Latur and Koyna earthquakes and numerous other recent reverse faulting events occurred in this compressional setting. The N/S spatial gradient of stress exceeds 2 bars/km near the flexural bulge. The overall flexural stress distribution provides a physical basis for earthquake hazard mapping and suggests that areas of central India where no historic earthquakes are recorded may yet be the locus of future damaging events.     

Numerical Simulation of Drag Partition over Rough Surfaces

We present a numerical simulation of drag partition over rough surfaces. A computational fluid dynamics model is applied with high resolution to simulatingturbulent flows over arrays of roughness elements positioned on asmooth surface. The skin drag on the surface and the pressure drag on the roughnesselements are computed. The simulated drag partition compares well with wind-tunnelmeasurements and theoretical estimates for similar rough surfaces. This confirms that the computational approach offers an alternative to wind-tunnel and field experiments in studying drag and drag partition. The model is then applied to studying drag partition over rough surfaces with various roughness configurations. It is shown that drag partition depends not only on the magnitude of the roughness frontal area but also on the sizes and arrangement of roughness elements, because (1) the pressure drag coefficient is sensitive to roughness-element dimensions and (2) the arragement of roughness elements lead to different interferences of turbulent wakes. The impact ofthe latter factor is not insignificant.     

RELATIONSHIP OF ECO-ENVIONMENTAL CHANGE WITH NATURAL EROSION AND ARTIFICIALLY ACCELERATED EROSION

Ｆｏｒｌｏｎｇｔｉｍｅ,ｔｈｅｐｒｏｂｌｅｍａｂｏｕｔｎａｔｕｒａｌｅｒｏｓｉｏｎａｎｄａｒｔｉｆｉｃｉａｌｌｙａｃｃｅｌｅｒａｔｅｄｅｒｏｓｉｏｎｉｓｉｎｄｉｓｐｕｔｅ.ＨｉｓｔｏｒｉｃａｌｇｅｏｇｒａｐｈｅｒｓｃｏｎｓｉｄｅｒｔｈａｔｈｕｍａｎｉｎｄｕｃｅｄｅｃｏｅｎｖｉｒｏｎｍｅｎｔａｌｄｅｓｔｒｕｃｔｉｏｎｉｓａｃｃｏｕｎｔａｂｌｅｆｏｒｔｈｅｓｅｖｅｒｅｓｏｉｌｅｒｏｓｉｏｎａｎｄｅｃｏｅｎｖｉｒｏｎｍｅｎｔｄｅｔｅｒｉｏｒａｔｉｏｎｏｎＬｏｅｓｓＰｌａｔｅａｕ[7,8].Ｓｏｍｅｇｅｏｌｏｇ…     

ON BIO-EFFECTS ON KARST LANDSCAPE IN JIUZHAIGOU CONSERVATION, SICHUAN PROVINCE, CHINA—WITH SPECIAL REFERENCE TO A MICROMORPHOLOFICAL APPROACH

1.ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｓｅａｒｃｈｏｎｂｉｏｋａｒｓｔｓｔｒｅｔｃｈｆｒｏｍｎｉｎｅｔｅｅｎｔｈｃｅｎｔｕｒｙ,ｙｅｔｏｎｌｙｒｅｃｅｎｔｌｙ,ｍｏｒｅｅｆｆｉｃｉｅｎｔａｎｄｓｙｓｔｅｍａｔｉｃｒｅｓｅａｒｃｈｈａｓｂｅｅｎｐｕｔｆｏｒｗａｒｄｗｉｔｈｔｈｅａｐｐｅａｒａｎｃｅｏｆｒｅｌａｔｅｄｓｐｅｃｉａｌｔｅｒｍｉｎｏｌｏｇｙａｎｄｄｅｔａｉｌｅｄｒｅｖｉｅｗｓ[3,11,30,3638],ａｎｄｉｔｓｅｅｍｓｔｈａｔｔｈｅｒｅｉｓｓｔｉｌｌｌａｃｋｏｆｂｉｏｋａｒｓｔｉｎａｌｐｉｎｅｅｎｖｉｒｏ…     

A record of accelerated erosion in the recent sediments of Blelham Tarn in the English Lake district

Two frozen cores from Blelham Tarn were subsampled and measured using mineral magnetic, loss-on-ignition (LOI), radiometric, granulometric and diatom analyses. A detailed chronology was established using varves, radioisotopes and diatoms. This has enabled an accurately dated reconstruction of sedimentation over the past forty years. Despite a large increase in lake productivity, evidence suggests that the observed exponential increase in sedimentation rates can be attributed to erosion within the catchment. The predominant sediment source has been identified as surface soil. A comparison between the trend of accelerated sedimentation and the record of increased sheep stocking density for the area within which the most of the catchment lies, as well as observations of contemporary surface processes within the catchment, both suggest that much of the recent erosion is a direct response to increased pressure from sheep grazing.     

Streambank fish-shelter structures help stabilize tributary streams in Wisconsin

 A significant proportion of stream sediment yield in North America comes from stream channel and bank erosion. One method used for stream stabilization is the bank installation of timber and stone fish-shelter structures, but there is little evidence for their potential effectiveness. Nine to nineteen years of precise survey data from Coon Creek, Wisconsin, however, show that fish structures enhance sediment deposition along the stream and may retard lateral migration of channels. Such structures have greater utility for sediment control when streams are eroding away a high bank and replacing it with a lower bank. Received: 18 October 1996 · Accepted: 4 February 1997     

Geotechnical Hazards Associated with Desert Environment

The aridity of the Arabian Peninsula's deserts ranges between arid to hyperarid with hot dry climate, scarce precipitation and sparse vegetation. These harsh environmental conditions enhance some geomorphologic processes more than others, cause specific geotechnical problems, and increase desertification.From west to east, the general physiography of Saudi Arabia shows the Red Sea coastal plains and the escarpment foothills called Tihama followed by the Arabian Shield mountains, the Arabian Shelf plateau and finally the Arabian Gulf coastal plains. Sand moves by wind either as drifting sand or migrating dunes in four major sand seas, over the Arabian Shelf, and in the inter-mountain valleys, in the Arabian Shield causing problems of erosion and deposition. Human activities in the deserts may cause more instability to the sand bodies, enlarging the magnitude of the problem. Fine silty soil particles also move by wind, depositing loess mainly in selected areas downwind in the Tihama. These loess deposits subside and may form earth fissures by the process of hydrocompaction upon wetting. The addition of water can be either natural through storms or man-made through human agricultural or civil activities. Extensive sabkhas exist along the coastal plains of both the Red Sea and Arabian Gulf. The sabkha soil may also heave by salt re-crystallization or collapse by wetting. The shallow groundwater brines present in sabkhas also attack and corrode civil structures. Urbanization and excessive groundwater pumping may also deplete the fresh groundwater resources and may cause subsidence, ground fissuring and surface faulting as observed in some locations in the Arabian Shield. Although the average annual precipitation is very low, rain usually falls in the form of torrential storms, collected by dry valley basins and causing floods to unprotected downstream areas on the coastal plains of the Red Sea.The desert environment, being a fragile echo system, needs to be treated with care. Intercommunications between different national and international agencies and education of the layman should help to keep the system balanced and reduce the resulting environmental hazards. In addition, any suggested remedial measures should be planned with nature and engineered with natural materials.