东营凹陷油气运聚古地下水动力场剖面数值模拟

本文对东营凹陷油气运聚古地下水动力场剖面数学模型的建立、古水文地质参数的再造、模拟初始值的恢复进行了阐述。在此基础上,进行了东营凹陷油气运聚古地下水动力场剖面数值模拟。模拟结果与已知油田的分布具有较好的一致性。推断的东营凹陷油气聚集有利地段,可以作东营凹陷油气田进一步勘探开发的依据。     

西湖凹陷西次凹古近系花港组—平湖组深层油气成藏过程

西湖凹陷西次凹古近系花港组和平湖组深层油气资源丰富，是东海陆架盆地勘探开发新领域，受储层差异致密化影响，油气成藏机理复杂。为了厘清西次凹深层油气成藏过程，本文通过流体包裹体岩相学特征、显微测温、激光拉曼光谱、包裹体所含油气地球化学等实验分析，结合构造演化、地层埋藏史、热史等，开展了系统的储层特征、油气成藏期次、成藏过程研究。结果表明，花港组深层（>4000 m）和平湖组储层均已致密化，溶蚀孔隙是主要的储集孔隙类型；花港组和平湖组均发育两期油气包裹体，早期含油包裹体较多，晚期以天然气包裹体为主，成藏时间分别为龙井运动期和冲绳运动期，以晚期天然气成藏最为关键。包裹体中油气地球化学特征类似，反映生烃母质以高等植物生源为主，低等生物为辅，与平湖组煤系烃源岩特征一致。冲绳运动叠加平湖组生气增压是晚期天然气成藏的主要动力，此时H10段及以上储层未致密化。根据储层致密化与成藏时序匹配关系可将西次凹M构造深层油气藏类型划分为常规型、先成藏后致密型、先致密后成藏型和边成藏边致密型4种。本文成果可为研究区下一步致密砂岩气的勘探开发部署提供重要的理论依据。     

A new approximation for pore pressure accumulation in marine sediment due to water waves

The residual mechanism of wave‐induced pore water pressure accumulation in marine sediments is re‐examined. An analytical approximation is derived using a linear relation for pore pressure generation in cyclic loading, and mistakes in previous solutions (Int. J. Numer. Anal. Methods Geomech. 2001; 25 :885–907; J. Offshore Mech. Arctic Eng. (ASME) 1989; 111 (1):1–11) are corrected. A numerical scheme is then employed to solve the case with a non‐linear relation for pore pressure generation. Both analytical and numerical solutions are verified with experimental data (Laboratory and field investigation of wave– sediment interaction. Joseph H. Defrees Hydraulics Laboratory, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1983), and provide a better prediction of pore pressure accumulation than the previous solution (J. Offshore Mech. Arctic Eng. (ASME) 1989; 111 (1):1–11). The parametric study concludes that the pore pressure accumulation and use of full non‐linear relation of pore pressure become more important under the following conditions: (1) large wave amplitude, (2) longer wave period, (3) shallow water, (4) shallow soil and (5) softer soils with a low consolidation coefficient. Copyright © 2006 John Wiley & Sons, Ltd.     

盐田嗜盐单胞杆菌的分离鉴定及其PHB 积累的研究

微生物聚合物聚-?-羟基丁酸酯(PHB)具有良好的生物降解性、生物相容性和热塑性,在环保、医药和农业领域具有广阔的应用前景。高PHB积累菌株的获得及其发酵条件的研究具有很好的实用价值。作者从渤海湾日晒盐场盐田卤水中分离出一株杆状细菌,经16S r DNA序列测序比对,确定为盐杆菌属(Halomonas),命名为Halomonas 100-16-2,其最适生长盐度为50~100,最适生长p H为7~8,属中度嗜盐菌。在酸水解酪蛋白(7.5 g/L)的基础培养基中分别添加0、10、20和30 g/L葡萄糖,研究盐度100条件下不同葡萄糖添加量对Halomonas 100-16-2生长和PHB含量的影响。结果表明,随着葡萄糖浓度的增加,该菌株的生长和PHB积累显著提高。葡萄糖质量浓度为30 g/L时,细胞干质量达8.60 g/L,PHB含量达到5.57 g/L(即达到细胞干质量的65%)。本研究为渤海湾盐田微生物资源的开发和利用提供了有价值的基础数据。     

深厚堆积体地层钻进工艺方法研究

太钢(集团)有限公司矿业公司峨口铁矿是一个从20世纪60年代就开始开采的老矿区,经过长期开采储量已严重不足。为了延长矿山寿命,需要进一步扩大勘探范围,在原有矿山周边地区进行勘探。最初采用岩心勘探钻机进行常规回转钻进加套管护壁,历时3个月。在上部堆积体地层最大钻孔深度达到约20m,再也无法继续钻进,使勘探工作被迫停止。针对深厚堆积体地层钻孔施工遇到的具体困难,介绍了风动潜孔锤双管跟管钻进在工程施工中的应用,在对深厚堆积体地层进行分析的基础上,探讨进行深厚堆积体地层钻孔施工的工艺方法及技术措施;在钻孔结构基础上选择钻孔设备及钻孔机具的一般原则,对深厚堆积体地层的钻孔工程施工具一定指导意义。     

河南登封晚古生代层序地层及聚煤特征研究

运用露头、钻井岩心层序地层学的有关理论方法,对蹬槽剖面的晚古生代地层进行了详细的沉积学和层序地层学研究,共识别出8个三级层序界面,把本研究区域晚古生代地层划分为7个三级层序。S1大致相当于本溪组;S2大致相当于太原组;S3大致相当于山西组;S4和S5分别对应下石盒子组的上下部分;S6对应上石盒子组;S7对应石千峰组。在这些层序中,低位体系域往往以发育三角洲平原分流河道相砂砾岩、或残积相风化壳、或滨湖相中细砂岩为特征,而水进体系域多障壁岛-潟湖相泥岩和粉砂岩、三角洲前缘相砂泥层以及浅湖相细砂岩为主,高位体系域则主要为浅海相碳酸盐岩、前三角洲相泥岩及富泥质的浅湖相沉积序列。层序S1～层序S2物源不丰富,聚煤作用主要发生在海侵初期或海退时期;层序S3～层序S6物源相对丰富,聚煤作用主要出现在最大海泛附近。     

渤海湾盆地垦利A油田石油地质特征及成藏模式

针对垦利A油田油气成藏条件和成藏模式认识不清的问题,结合研究区构造特征和沉积背景,综合运用钻井、测井、分析化验等资料,对垦利A油田油气成藏条件和富集规律进行深入剖析。结果表明：莱州湾凹陷北洼和南次洼沙河街组沙三中段、沙四段均发育优质烃源岩,油源供给充足;储集层储层物性好,盖层区域分布稳定,形成3套有利储盖组合;油源断层、渗透性砂体和不整合面构成良好的油气输导系统;油气富集层位具有“西浅东深”特征。基于上述认识,建立了3种油气成藏模式：构造东部为近源“侧向式”成藏模式,在古近系沙河街组和中生界潜山成藏;构造中部为远源“阶梯式”成藏模式,具复式成藏特征;构造西部为远源“网毯式”成藏模式,在新近系馆陶组成藏。     

散粒体斜坡运动堆积特征试验研究

散粒体斜坡俗称“溜砂坡”,对其运动和堆积特征的研究是溜砂坡防治的关键.在斜坡模型架上模拟碎块石的运动过程和堆积过程,探索其颗粒大小、形态与斜坡角的关系.通过堆积体纵剖面取样发现,溜砂坡堆积呈现分形结构,其颗粒质量粒径分布分维数随黏粒含量的增大而增大.     

Influence of natural fractures on gas accumulation in the Upper Triassic tight gas sandstones in the northwestern Sichuan Basin,China

The Upper Triassic Xujiahe Formation in the northwestern Sichuan Basin, China, is a typical tight gas sandstone reservoir that contains natural fractures and has an average porosity of 1.10% and air permeability less than 0.1 md because of compaction and cementation. According to outcrops, cores and image logs, three types of natural fractures, namely, tectonic, diagenetic and overpressure-related fractures, have developed in the tight gas sandstones. The tectonic fractures include small faults, intraformational shear fractures and horizontal shear fractures, whereas the diagenetic fractures mainly include bed-parallel fractures. According to thin sections, the microfractures also include tectonic, diagenetic and overpressure-related microfractures. The diagenetic microfractures consist of transgranular, intragranular and grain-boundary fractures. Among these fractures, intraformational shear fractures, horizontal shear fractures and small faults are predominant and significant for fluid movement. Based on the Monte Carlo method, these intraformational shear fractures and horizontal shear fractures improve the reservoir porosity and permeability, thus serving as an important storage space and primary fluid-flow channels in the tight sandstones. The small faults may provide seepage channels in adjacent layers by cutting through layers. In addition, these intragranular and grain-boundary fractures increase the connectivity of the tight gas sandstones by linking tiny pores. The tectonic microfractures improve the seepage capability of the tight gas sandstones to some extent. Low-dip angle fractures are more abundant in the T₃X³ member than in the T₃X² and T₃X⁴ members. The fracture intensities of the sandstones in the T₃X³ member are greater than those in the T₃X² and T₃X⁴ members. The fracture intensities do not always decrease with increasing bed thickness for the tight sandstones. When the bed thickness of the tight sandstones is less than 1.0 m, the fracture intensities increase with increasing bed thickness in the T₃X³ member. Fluid inclusion evidence and burial history analysis indicate that the tectonic fractures developed over three periods. The first period was at the end of the Triassic to the Early Jurassic. The tectonic fractures developed during oil generation but before the matrix's porosity and permeability reduced, which suggests that these tectonic fractures could provide seepage channels for oil migration and accumulation. The second period was at the end of the Cretaceous after the matrix's porosity and permeability reduced but during peak gas generation, which indicates that gas mainly migrated and accumulated in the tectonic fractures. The third period was at the end of the Eogene to the Early Neogene. The tectonic fractures could provide seepage channels for secondary gas migration and accumulation from the Upper Triassic Xujiahe Formation into the overlying Jurassic Formation.     

泌阳凹陷下二门油田油气成藏机制探讨

为了弄清下二门油田的油气成藏机理,利用包裹体、平衡剖面和生烃史模拟等技术,详细分析了其油气充注成藏过程,结果表明,早期(古近纪核二末期至核一末期)油气小规模缓慢充注,形成早期小规模油气藏;中期(古近纪廖庄期末构造抬升期)受差异抬升构造运动影响,油气大规模快速充注,形成中期大规模原生背斜油气藏;晚期(新近纪上寺组沉积末期)断裂发育,早、中期原生油气藏遭受破坏,同时深凹区核三下、上段生成的高成熟油气沿砂体侧向运移补给,油气大规模沿断层向上运移,遇遮挡形成大量次生油气藏和气藏。