Time lag between reduction of sediment supply and coastal erosion

The disruption of sediment supply from river to coast by dam development has been a topic of global concern.In Japan,among the top 30 dams in terms of height,14 dams were constructed prior to 1970 and another 6 dams before 1980.However,the coastline erosion did not surface up as a grievous problem until the 1980s.According to the River Bureau of Japan,the overall erosion rate along the coastline of Japan was 0.72×10~6 m~2/yr prior to 1980,but sharply increased to 1.6×10~6 m~2/yr since 1980.Therefore,there was a time lag between the disruption of sediment supply by dam and beach erosion.This paper presents a case study on what may have delayed the response of beach to the effect of dam construction.     

山东莱州浅滩地区沉积特征与沉积作用

通过系统采集海底表层沉积样品进行粒度测试分析,对现代莱州浅滩地区的沉积类型、粒度特征、泥沙搬运方式、运移趋势及沉积动力、沉积机制进行了研究。结果表明,莱州浅滩是形成于松散碎屑堆积海岸岬角岸外的砂砾质水下沙洲／沙脊,它的形成深刻改变了浅滩地区原有的沉积动力和机制,在浅滩两侧海域各自形成了大致对称的潮余环流,分别与两个主要...     

Impact of mega-scale sand extraction on tidal dynamics in semi-enclosed basins: An idealized model study with application to the Southern North Sea

Long-term considerations of repeated and increasing sand extraction on the Netherlands Continental Shelf (North Sea) may lead to the creation of a mega-scale extraction trench in front of the Dutch coast (length hundreds of km, width over 10 km, depth several m). We investigate the impact of such a huge topographic intervention on tidal dynamics, which is a key aspect in hydrodynamics, and indirectly also affecting morphodynamics and ecology.     

Effects of sand grain size and morphological traits on running speed of toad-headed lizard Phrynocephalus frontalis

We conducted a manipulative experiment to investigate the influential factors of locomotor ability in steppe toad-headed lizards. By using a video-base method, we measured running speed of the lizards when they run on sands of different grain sizes. We also considered body condition, tail length and sex as fixed factors to analyze their effects on running speed of the lizard. Results showed that running speed of the lizard significantly differed among different trials of sand grain size. Specifically, the peak and the nadir values of the running speed were found on sands of 0.5-1 mm and 0.075-0.25 mm grains, respectively. When lizards ran on sands of different grain size their running speed changed significantly. Body condition and tail length also had significant effects on running speed. The findings indicated that locomotor ability of lizards depended on both body condition and the external environment. We hypothesized that sand grain size is one of the factors that influence the habitat selection in steppe toad-headed lizards. Moreover, this lizard may be used as an indicator of the development of sand dunes.     

A laboratory study of the self sealing behaviour of a compacted sand–bentonite mixture

Bricks made of compacted sand–bentonite mixture are considered as a possible engineered barrier to isolate high-level radioactive waste at great depth. This work is aimed at investigating some specific effects related to the presence of discontinuities at the contact between the bricks and the excavation wall. In order to do this, an experimental device was developed in the laboratory. The model is made up of a specially designed infiltration cylinder which allows the precise definition of a planar discontinuity between the compacted specimen (a sand–bentonite mixture made up of sand and Kunigel clay from Japan) and a metal wall. During hydration and subsequent specimen swelling, the planar wall is filled, resulting in a healing process. Three total pressure gauges placed along the wall allow a detailed observation of the increase in total stress against the wall. After different periods of swelling, the maximum resistance of the specimen–wall interface to pressure was tested by imposing a pressure increase through a porous stone placed at one end of the cylinder. It was found that the maximum pressure supported by the interface is a function of the initial thickness of the discontinuity and the initial density of the specimen. It was also found that the maximum sustainable pressure depends linearly on the elapsed time. These results are of interest for optimizing water infiltration procedures in either mock-up tests or real disposal systems. If the maximum sustainable pressure at the interface is known, it is possible either to ensure homogeneous hydration of a mass of bricks by respecting the maximum injection pressure limit or to accelerate hydration by forcing water paths along the discontinuities.     

The First James K. Mitchell Lecture In situ soil testing: from mechanics to interpretation†

The current use of fundamental mechanics in developing rational interpretation methods for deriving soil properties from in situ test results is reviewed and evaluated. The focus is on some of the most widely used in situ test devices including cone penetrometers with and without pore pressure measurements (CPTU and CPT), self-boring and cone pressuremeters (SBPMT and CPMT), and flat dilatometers (DMT). In situ tests in both cohesive and frictional soils for measuring strength and stiffness properties, in situ state parameters, consolidation coefficients, stress history, and in situ stresses are considered in detail.     

A laboratory study on the undrained strength of a silty sand from Central Western Taiwan

The sand deposit in Central Western Taiwan typically contained significant amounts of fines. The assessment of liquefaction potential using the simplified procedure often involved adjustment in field test results to account for the effects of fines. The available fines content (FC) adjustment methods are highly empirical and may lead to very different conclusions. The need and/or level of FC adjustment should be justified based on cyclic behavior of sand and its relationship with fines. This study made an attempt to provide that reference information for a silty sand commonly found in Central Western Taiwan. A series of isotropic consolidation, undrained monotonic and cyclic triaxial tests were conducted on reconstituted Mai Liao Sand (MLS) with various FCs and densities. Concurrent shear wave velocities were measured using bender elements in some of the cyclic triaxial tests. This paper describes the geological background, the laboratory tests and their implications in the assessment of liquefaction potential for MLS.     

科尔沁沙地土壤水分动态分析及其概率密度函数模拟

基于Laio土壤水分动态随机模型(Laio模型),利用2006-2010年5~9月土壤水分连续监测数据及日降水资料,分析科尔沁沙地固定沙丘和沙质草地生长季根系层土壤水分动态及其与降水格局的关系,研究点尺度土壤水分概率密度函数,并对Laio模型涉及的13个参数进行了敏感性分析。结果表明:① 研究区年降水的季节分配极不均匀,主要集中在4~10月的生长季,占全年降水量的93%;0~5 mm降水事件占全年降水事件的73%,但其降水量只占全年降水量的25%;降水间隔期以0~10 d为主,占全年无降水期的38%,其频数最高,占全年间隔期频数的87%。② 固定沙丘和沙质草地根系层厚度分别为0~100 cm和0~70 cm,沙质草地根系层土壤水分显著高于固定沙丘;两类沙地7月份的土壤水分都显著高于生长季其他月份。③ 两类沙地生长季根系层土壤水分均服从正态分布;通过Laio模型得到了两类沙地生长季根系层土壤水分概率密度函数p(s),其峰值及峰值出现的位置和峰的阔度均与观测结果很接近,说明Laio模型能对科尔沁沙地土壤水分概率密度函数进行较好的模拟。④ Laio模型涉及的13个参数中,对p(s)最为敏感的参数是降水频率λ、平均降水量α、最大蒸散量E_max、水分胁迫点s*和凋萎系数s_w,主要影响p(s)曲线的峰值。     

Geomorphology of sand dunes in the Northeast Taklimakan Desert

Three types of sand dunes exist in the Taklimakan Desert, namely compound/complex crescent dunes and crescent chains, compound dome dunes and compound/complex linear dunes. Besides these three compound/complex types, single simple dunes are also distributed throughout the sand sea. The compound/complex linear dunes are developed under acute bimodal wind regimes. Though the ratios of the resultant drift potential (RDP) and the drift potential (DP) are the same as that near the border and adjacent area of the sand sea, the compound/complex crescent and dome dunes are developed, respectively, because of divergence of the sand available, the stress of the sand-moving winds and the time scales of dune formation. The sand supply for the dunes is not from Lopo Nor in the east as previous studies suggested but mainly from local alluvial or lacustrine deposits. The grain size component does not correlate evidently to the morphology parameters of the sand dunes. Analyses of the DP and drift direction suggest that the northeast Taklimakan is an area of low wind energy and the resultant drift direction (RDD) coincides well with the distribution, morphology and scales of the dunes.