广西环江县北山地区喷流沉积铅锌矿资源潜力及找矿方向

环江县北山地区铅锌矿均富集在同一地层层位——中上泥盆统，五圩—川山—驯乐NNE向深断裂控制着成矿带，矿床存在大量沉积成岩成矿组构，喷流沉积特征明显。其成矿地质背景、沉积相、礁硅岩套建造、同生断裂活动、赋矿层位等与邻区丹池锡一铅锌多金属矿集区类似，有巨大找矿潜力。     

广西东攀P-T界线深水相剖面与煤山剖面地层学对比

从放射虫生物地层学、黏土矿物事件地层学和有机碳同位素地层学方面对广西柳桥地区东攀二叠系-三叠系深水相剖面进行了研究,并与浙江煤山剖面(GSSP)同期地层进行了对比.结果表明,东攀剖面上二叠系-三叠系界线处与煤山剖面具有较好的可比性:①东攀剖面放射虫A.yaoi带可以与煤山剖面的Clarkina changxingensis-C.postwangi-C.postsubcarinata-C.deflecta组合带对比;②两剖面都具有性质相似、延伸稳定的界线黏土岩;③在两剖面界线黏土岩中,有机碳同位素组成都发生了巨减.     

广西柳桥深水相二叠系/三叠系界线剖面有机碳同位素地层学对比研究及事件响应

研究了广西柳桥地区东攀剖面有机碳同位素的组成,并和浙江煤山剖面进行了对比。结果表明东攀剖面在1δ3Corg变化趋势上,既具有全球PTB剖面普遍存在的共性,又具有其独特性。在东攀剖面一个显著的1δ3Corg负漂移出现在事件界线(EB)之上和二叠系/三叠系界线(PTB)之下,这与煤山剖面具有相似性。显著的1δ3Corg负漂移指示了P/T之交生物绝灭后海水表层水原始生产率的降低以及大气和海水中CO2含量的增加,并得到放射虫绝灭事件、火山事件和海退事件的响应。煤山剖面1δ3Corg负漂移从第27层就开始向13C富集的方向恢复,而东攀剖面1δ3Corg在下Induan阶仍持续亏损,表明东攀剖面早三叠世的生物复苏明显滞后于煤山剖面的。     

贵州瓮福磷矿床含磷岩系沉积层序的划分

应用层序地层学的概念和方法,从沉积特征研究入手,对该区的含磷岩系——洋水组划分出5个沉积层序(旋回),结合层序界面及层序的归纳描述,确定了层序类型,并认为洋水组是一套海进体系域中由一系列低级别退积型沉积层序(旋回)组成的高级层序(Ⅰ级))。     

从流体包裹体特征探讨泥堡金矿成因

泥堡金矿床据脉石矿物和萤石的包裹体研究,包裹少而小,类型较为简单。综合包裹体各项参数和气液成分分析认为,成矿流体属NaCl-H_2O体系的富K~ 的、弱酸性溶液,具有较高密度、较低盐度和中-低温度的特点。结合硫和氢氧同位素测定结果,成矿流体是燕山运动阶段的地表水沿断裂深循环,特别是在富K、富Au的凝灰岩中往复循环作用形成的。当各种条件具备时即可卸载成矿,成矿的最佳位置就是沿P_(2-3)β_1与P_2m~(dc)之间沉积间断面发生的层间滑动构造带。     

西藏定结、定日一带上石炭统纳兴组重力流沉积及其地质意义

西藏定结、定日一带上石炭统纳兴组为一套厚度巨大的陆源碎屑沉积, 该组中部首次识别出重力流沉积.重力流沉积可划分为3个类型: 崩塌沉积、碎屑流沉积和浊流沉积, 以碎屑流沉积常见.通过沉积相和基于沉积物组分及地球化学方面的物源分析, 判断该区晚石炭世存在小型洼陷盆地, 其形成与晚石炭世海西伸展运动有关, 纳兴组重力流沉积与下伏滨浅海沉积之间具一伸展不整合.      

内蒙古胜利煤田共生锗矿的成因地球化学初探

用统计和作图的分析方法,对内蒙古胜利煤田中共生锗矿床的锗品位与挥发分、灰分、硫分的关系进行了研究。结果表明煤中锗品位与挥发分呈正相关、与原煤灰分负相关、与洗煤灰分正相关关系;全区煤属中硫煤,锗品位与原煤和洗煤硫分均呈正相关关系,煤的灰分指数较低(3 579);锗分布不均匀,富锗煤矿明显属于断裂坳陷边缘沉积,锗品位可以在煤层的顶部、中部、底部同时或单个部位呈现高值,大多数煤层中部出现锗高品位值,这有别于以往所报道的锗品位只在煤层顶、底部相对富集的研究结论。认为胜利煤田锗主要与有机质结合;锗的有利聚集条件是水动力较弱、地下水位较低、强还原的停滞沼泽环境;泥炭聚集阶段有机质的吸附作用是锗的主要富集机制。     

云南省宾川县白象厂金矿地质特征及成矿规律探讨

通过对白象厂金矿的区域地质概况、矿区地质特征及控矿因素的分析研究，认为，白象厂金矿产于二长斑岩与玄武岩接触带上，局部赋存于二长斑岩与大理岩、玄武岩与大理岩的接触带上，呈脉状，似层状透镜状产出。矿化受构造及岩浆岩联合控制。矿床为构造破碎斑岩蚀变型金矿床。根据该矿床的控矿规律，认为沿金矿化带的走向和倾向方向上可能找到厚大、品位高的金矿体或金的次生富集体。     

云南因民铁铜矿区辉长岩类中黑云母-金红石化特征及其指示意义

对云南因民铁铜矿区深部辉长岩类中金红石、黑云母、碳酸盐和绿泥石的矿物地球化学特征进行研究,以探讨赋存于辉长岩类中的铁氧化物铜金型矿(化)体的成岩成矿环境。金红石由岩浆结晶和多期蚀变作用形成,其结晶温度为820~1 082 ℃,多期蚀变温度为444~730 ℃,金红石与黑云母密切共生;黑云母可划分为原生高钛镁质黑云母、热液蚀变镁质黑云母和铁质黑云母,形成温度分别为653~750 ℃、525~619 ℃和551~577 ℃,氧逸度均位于Ni NiO缓冲剂附近,表明黑云母形成于高温强氧化环境,有利于金红石化;铁白云石-菱铁矿化揭示了强还原环境,交代蚀变金红石;绿泥石多由铁镁矿物蚀变形成,形成于中低温(174~243 ℃)、低氧逸度(-4468~-5142)和高硫逸度(-1442~-1976)的强还原环境,有利于金属硫化物形成。本区岩浆结晶演化和黑云母-金红石化蚀变具有高温强氧化地球化学岩相学特征,有利于钛、铁矿化,后期叠加中低温强还原地球化学岩相,为IOCG矿床成矿的有利地球化学岩相学类型。     

Physical criteria for distinguishing sandy tsunami and storm deposits using modern examples

Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity.

Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial.

The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.