县域生态足迹动态变化分析——以内蒙古和林格尔县为例

采用生态足迹的理论和分析方法对和林格尔县可持续发展进行了评价分析。结果表明：1997--2007年间,和林格尔县二、三产业发展水平偏低,导致人均生态赤字越来越大,和林格尔县发展需要所占用的生态服务已经超出了其本身可承载的能力;和林格尔县每万元GDP所消耗的生态足迹呈逐年下降趋势;从历年生态足迹构成来看,耕地和化石能源用地占整个生态足迹的比重很大,是影响和林格尔县生态足迹变化的最重要因素。     

模糊优选神经网络模型在城市防洪规划方案优选中的应用

城市防洪规划方案的综合优选是一个涉及到政治、社会、经济、环境等多准则、多因素的复杂多目标决策问题.针对目前各种常用的综合优选模型应用中存在的指标权重选择及转换问题,利用模糊优选神经网络模型,构造了合理的网络拓扑结构并将模型应用于某城市的防洪规划方案综合优选中.实例结果表明,此模型不仅避免了对指标权重的处理问题,而且明显加快了BP网络的收敛速度.     

气象要素对草面温度的影响分析及其质量控制方法

运用天气学原理,分析天气现象变化(辐射、云、降水、风)与草温变化的密切关系,找出草面温度的各种不同天气变化规律,对草面温度观测资料进行质量控制.     

FY-2C云迹风资料在中尺度数值模式中的应用研究

利用探空观测资料对FY-2C云迹风资料进行统计检验和误差分析,并针对其误差特征进行偏差订正和热成风原理两种方法的质量控制.然后通过GRAPES-3Dvar同化到GRAPES-Meso模式中,对2005年7月1日00时至7月2日00时发生在中国西北部的一次暴雨过程进行了数值对比试验.结果表明:云迹风数量在垂直方向上主要集中分布于500 hPa以上的对流层中高层,在250 hPa附近数量分布概率最大;高度在500 hPa以下云迹风存在明显的风向误差和很大的风速误差,而且误差分布发散,可用性较差.500 hPa以上层次的云迹风误差较小,且误差分布呈高斯分布具有一定的系统特性,可用性较好;通过质量控制后,可以把风向错误或风速偏差太大的云迹风予以剔除,进一步提高云迹风的精度;同化云迹风资料后,在暴雨区附近初始风场低层的西南气流明显加强,有利于暴雨区水汽输送和水汽辐合,最终能很好地改善24 h暴雨预报的强度和落区.     

奥运短时临近预报实时数据处理

详细分析了目前短时临近预报系统对自动气象站数据质量控制、探测数据更新频率、组网雷达时间同步观测与基数据实时传输、探测数据的实时传输技术、基于目录监控的数据监控与分发机制、基于开源的软件开发、数据格式等方面的需求.在此基础上,建立了北京奥运短时临近预报数据快速收集处理系统并已经投入业务运行,该系统实现了探测数据的实时传输、组网雷达时间同步观测和基数据实时传输、基于消息驱动的数据实时监控和分发、探测数据格式规范化等功能,基本满足北京2008年奥运短时临近预报系统的数据预处理业务需求.     

风电场风资源测量与计算的精度控制

根据多个复杂地形风电场观测操作实践和大量观测数据的计算分析,提出了对观测数据和计算质量精度控制的主要措施,包括:复杂地形测风站布设的5个原则,仪器的合理选型和设置;对由于测风仪固有的系统误差和缺测数据的插补订正可能引起的计算误差进行了定量估算,通过对大量实测数据的对比计算显示:①目前普遍采用的进口风速计的相对偏差在1.6%～5.25%之间,由此可导致轮毂高度附近的年平均风功率密度误差在5%以上,最大达13.8%;②在季风气候区、复杂地形和风的年变率较大的地区,进行缺测数据插补订正时,应选取同季或同一主导风向的数据作为插补订正的基础数据,否则可能导致其平均风功率密度相对误差达20%～50%.     

京津冀地区霾成因机制研究进展与展望

为满足当前对京津冀地区霾研究和控制的迫切要求,本文梳理了近年来京津冀地区霾的长期变化特征、天气学特征、污染物来源等相关研究成果,发现:从2000年以后,京津冀地区的霾日数呈现出了下降趋势;北京细颗粒物(PM2.5)质量浓度也在总体上呈现下降的趋势,但2013年年均质量浓度仍高达89.5μg m–3,约为我国空气质量标准的3倍(35μg m–3),京津冀空气污染的形势依然严峻;近年来京津冀地区的霾污染事件频发可以归因为不利天气条件与大量污染物人为排放的共同作用;大量的研究表明,区域输送对京津冀地区霾事件的形成和维持有不可忽视的影响;京津冀地区的大气污染不再局限于一时一地,针对重污染天气的预警以及应急控制应该以区域预报为基础实现区域联动;京津冀地区独特的地理环境条件加上城市群的快速发展,形成的局地大气环流也会对局地的污染过程产生重大的影响;大气边界层内气象要素的变化对重污染发生具有显著贡献。京津冀地区的污染控制需要城市群的联动应对治理。     

长度检定场设计及控制测量

长度检定场是电磁波测距仪量值传递的主要标准,主要用于各等级电磁波测距仪的常数测定,本文根据相关的测量规范,就建场设计及其控制测量中一些技术问题作了一些分析和探讨.     

Retardation capacity of altered granitic rock distributed along fractured and faulted zones in the orogenic belt of Japan

There are wide areas of granitic rocks in the Japanese orogenic belt. These granitic bodies inevitably contain fracture and fault systems associated with alteration zones. However, relatively little attention has been given to the possible influence of such widely distributed alteration zones on the migration of radionuclides from any radioactive waste repository that might in future be sited within granitic rock. In particular, the influences of alteration products and micro-fractures, due to chemical sorption and/or physical retardation require further consideration. In order to understand the retardation capacity of the altered deep granitic rocks, detailed geometrical characterization of pores, geochemical analysis, and batch sorption and flow-through experiments have been carried out. Those results show that the altered granite has a large volume of accessible pores, particularly in potassium-feldspar grains, which would influence nuclide retardation more than the accessible porosity in other minerals present, such as biotite. The distribution coefficients, Kd estimated from batch sorption tests and flow-through experiments suggest that altered granite has a high capability to retard the migration of nuclides. The retardation would probably be due to sorption on altered minerals such as sericite and iron hydroxides formed along grain boundaries and in pores created by dissolution, in addition to sorption on primary sorptive minerals. These results provide confidence that even altered and fractured parts of any granitic rock that might be encountered in a site for the disposal of high level radioactive waste may still retard radionuclide migration and thereby help the geosphere to function as a barrier.     

Application of Greek lignite as an additive for controlling rheological and filtration properties of water–bentonite suspensions at high temperatures: A review

This review paper presents the results of an extensive study investigating whether addition of 3% w/w Greek lignite to 6.42% w/w water–bentonite suspensions, after being exposed to high temperatures, can prevent gelation and control filtration characteristics. Two different bentonites and eight lignites from different Greek basins have been used while a commercial lignite product has been used as standard. The lignite-free bentonite suspensions heated to 177 °C for 16 h (thermal aging) thicken considerably, increasing the yield stress and the yield point. Fluid consistency and flow behavior indices also change while no significant change is observed for plastic viscosity. Thermal aging of the suspensions results in unacceptably high fluid loss values.Addition of Greek lignite to water–bentonite suspensions, followed by thermal aging, provided the rheological stability of the suspensions by maintaining the low yield stress/point regardless of the type of bentonite. Some of the lignites performed as well as their commercial counterpart. No specific trends for rheological improvement have been identified with respect to various characteristics of lignites such as contents of humic, fulvic acids, humins and other parameters such as specific surface area and cation exchange capacity.Furthermore, addition of lignite in most cases provided very good filtration control of the water–bentonite suspensions after exposure to 177 °C, with some Greek lignites being superior to the commercial product. The same lignite parameters examined for rheological control, were also examined to determine their effect on fluid loss of these suspensions for both bentonites. The content of humic and fulvic acids of two groups of lignites showed weak inverse correlations with the fluid loss volumes for both bentonites, while all other parameters did not seem to directly correlate with the effectiveness of the lignites.