Use of time series analysis for the identification of tidal effect on groundwater in the coastal area of Kimje, Korea

The purpose of this study is to apply time series analysis to investigate whether the groundwater quality in the coastal area is affected by the tide. Continuous and regular in situ monitoring data of electrical conductivity (EC) and groundwater level, and tidal level data measured by the National Oceanographic Research Institute were used for the time series analysis. Through the time series analysis, it is known that EC and groundwater level conspicuously fluctuate with two periodicities (15.4 and 0.52-day), which is very similar to those of the tide. Also the behaviors of their fluctuations vary in accordance with the tidal period. These indicate that the groundwater quality has been mainly controlled by the tidal level, and the strength of tidal effect on the groundwater quality is different according to the tidal period.     

Effects of calculation procedure and sampling site on trap method estimates of sediment resuspension in a shallow lake

Resuspension estimates given by two different trap methods in a shallow lake were compared. The sensitivity of the methods to errors in estimates of gross sedimentation and organic fraction of trapped material was explored. The methods were label method, in which resuspension is estimated by determining the organic fraction of surface sediment, suspended seston and trapped material, and SPIM/SPM method, where the relationship between settling particulate inorganic matter (SPIM) and total settling particulate matter (SPM) is used. During the whole 111 day study period, according to the label method, at a sheltered station 1949 g m⁻² dry weight of sediment was resuspended, whereas SPIM/SPM gave an estimate of 1815 g m⁻². The difference in the estimates was probably due to mineralization loss of organic material in the traps during the two week exposure periods. Sensitivity analysis showed that of the two methods, the label method was more sensitive to variations in the organic content of trapped material. At a wind-exposed station, the total amounts of resuspended matter given by the label method and by the SPIM/SPM method were 4966 g m⁻² and 4971 g m⁻², respectively. Due to wind effects, escape of trapped material took place, which caused underestimation of gross sedimentation and compensated the effects of mineralization loss to diminish the difference between the methods. Of the two methods, the SPIM/SPM method seems thus more suitable for lakes, where bacterial activity is high. If cyanobacterial blooms take place, the label method is probably more reliable, providing that the exposure time of sediment traps is kept adequately short.     

Impact of human activity on the estuary of the Qiantang River and the reclamation of tidal flats and river regulation

The swing of the main channel of the Qiantang River is controlled by the high-water and low-water changes in the river, as well as the impact of large-scale reclamation of tidal flats. Its evolution in modern times is the result of the combined functions of natural and man-made factors. This paper analyzes the cause of the formation of the South Channel and Xisan Tidal Furrow and proposes the regulation principle of “To regulate the river and reclaim tidal flats by taking the advantage of local topography”. It is suggested to cut off the South Channel and Xisan Tidal Furrow completely to restrict the swing of the main channel and to increase the reclamation area of the tidal flat at the same time.     

The effects of yawing motion with different frequencies on the hydrodynamic performance of floating vertical-axis tidal current turbines

Under real sea conditions, the hydrodynamic performance of floating vertical-axis tidal current turbines is affected by waves and currents. The wave circular frequency is a significant factor in determining the frequencies of the wave-induced motion responses of turbines. In this study, the ANSYS-CFX software (manufacturer: ANSYS Inc., Pittsburgh, Pennsylvania, United States) is used to analyse the hydrodynamic performance of a vertical-axis turbine for different yawing frequencies and to study how the yawing frequencies affect the main hydrodynamic coefficients of the turbine, including the power coefficient, thrust coefficient, lateral force coefficient, and yawing moment coefficient. The time-varying curves obtained from the CFX software are fitted using the least-squares method; the damping and added mass coefficients are then calculated to analyse the influence of different yawing frequencies. The simulation results demonstrate that when analysing non-yawing turbines rotating under constant inflow, the main hydrodynamic coefficient time-varying curves of yawing turbines exhibit an additional fluctuation. Furthermore, the amplitude is positively correlated with the yawing frequency, and the oscillation amplitudes also increase with increasing yawing frequency; however, the average values of the hydrodynamic coefficients (except the power coefficient) are only weakly influenced by yawing motion. The power coefficient under yawing motion is lower than that under non-yawing motion, which means that yawing motion will cause the annual energy production of a turbine to decrease. The fitting results show that the damping term and the added mass term exert effects of the same level on the loads and moments of vertical-axis turbines under yawing motion. The results of this study can facilitate the study of the motion response of floating vertical-axis tidal current turbine systems in waves.     

江苏大丰潮滩悬沙级配特征及其动力响应

根据2002和2003年夏季在江苏大丰潮滩的现场观测资料,详细分析了悬沙级配的时空分布特征、影响因素及其对再悬浮、沉降和流速的响应.研究结果表明,悬沙颗粒较细,以粉砂为主,悬沙级配在潮周期内的变化模式有两种类型:一是稳定型,悬沙级配的时空(垂向和平面)变化很小;二是双峰型,悬沙级配的时空变化显著,粗细峰高度不断变化.再悬浮、沉降、涨潮时输入潮滩的悬沙和底质级配是影响悬沙级配的重要因子.再悬浮使粗颗粒悬沙的含量增加,悬沙与底质级配不断接近,沉降对悬沙级配的影响与再悬浮相反.再悬浮发生时悬沙级配对流速有明显响应.在没有再悬浮和沉降影响的情况下,潮滩不同部位、不同时间的悬沙级配趋于稳定和相同,对这种状态下的悬沙级配可称为背景悬沙级配,大丰潮滩背景悬沙级配的平均粒径为7μm.     

Hydrodynamics of salt marsh creek systems: Implications for marsh morphological development and material exchange

Integrated ebb-aligned drainage systems are a feature of tide-dominated marshes, and are generally regarded as major conduits for material exchange. In north Norfolk, highly unsteady creek flows exhibit well-developed velocity and stress transients which result from the discontinuous nature of the tidal prism and the interaction of shallow water tidal inputs with hydraulically rough vegetated surfaces. Marsh morphological development is governed by a form-process feedback, in the sense that the marsh surface acts as a topographic threshold separating the depositional regime of below-marsh tides from the erosional (ebb-dominated) regime of over-marsh tides. Vertical marsh growth results in increasing intermittency of creek sediment transport. Furthermore, velocity transients are associated with large discharges which must be allowed for in material flux computations. Creek flux measurements are not in themselves sufficient to estimate total material budgets, since a large proportion of tidal exchange may take place via the marsh edge. Such studies should focus instead on direct measurement of marsh surface processes. These findings have relevance beyond this back-barrier setting to marshes of different geometry, occupying a broad range of the tidal energy spectrum.     

长江口外潮汐精细化模型研究与精度分析

长江口外海上测量除受风浪影响较大外,最重要的问题是潮位控制非常困难。文中简要阐述了开展长江口外潮汐精细化模型研究的方法,介绍了利用潮汐精细化模型对长江口外航路任意点进行潮汐预报的方法,并通过实测数据进行了精度分析,提出了建议。     

胶州湾潮余流和物质输送之间的关系

基于MIKE21的HD模型,通过模拟得到胶州湾的潮流场,胶州湾在涨急时最大流速1.04m/s,落急时最大流速约为0.96m/s。胶州湾余流总体较小,平均为0.03m/s左右。并在湾内不同位置释放自由粒子,以MIKE21的Particle tracking模型计算出其在潮流作用下的运移轨迹,结果表明粒子大多数运移到湾内近岸区域,少部分在湾口区域附近;在潮流场基础上计算了欧拉余流场,并和粒子运移结果进行对比,表明欧拉余流场在区域流向比较一致时可以表示粒子运动的趋势,为物质迁移、控制污染等方面提供了一定的参考借鉴意义。     

A two-dimensional finite volume hydrodynamic model for coastal areas: Model development and validation

A two dimensional implicit finite volume scheme for solving the shallow-water equations is developed. The effects of the Coriolis force, surface wind stress, and waves are included. A non-uniform rectilinear forward staggered grid is used with Cartesian coordinates. The time integration is performed using the Euler implicit technique. The convective flux is treated using the deferred correction method. The viscous terms are discretized using a second order central difference approximation. The SIMPLE (Semi-Implicit Method for Pressure-Linked Equations) algorithm is used for coupling the velocity components and the water elevation gradient for the water level correction. The system of equations is solved sequentially using the Strongly Implicit Procedure (SIP). To simulate wave driven current, a phase averaged wave model is used first to simulate wave transformation and calculate radiation stresses. The performance of the developed model is validated for different sources of external forces and different combinations of boundary conditions. The validation cases include tidal circulation in a harbor and wave induced currents behind a breakwater parallel to the coastline. The model is finally applied to simulate the flow pattern in a closed artificial lagoon and along the coastline near Damietta Port located along the Northern coast of Egypt. Results of the developed model agree well with the published results for the considered cases.     

A real-time, event-triggered storm surge forecasting system for the state of North Carolina

A new real-time, event-triggered storm surge prediction system has been developed for the State of North Carolina to assist emergency managers, policy-makers and other government officials with evacuation planning, decision-making and resource deployment during tropical storm landfall and flood inundation events. The North Carolina Forecast System (NCFS) was designed and built to provide a rapid response assessment of hurricane threat, accomplished by driving a high-resolution, two-dimensional, depth-integrated version of the ADCIRC (Advanced Circulation) coastal ocean model with winds from a synthetic asymmetric gradient wind vortex. These parametric winds, calculated at exact finite-element mesh node locations and directly coupled to the ocean model at every time step, are generated from National Hurricane Center (NHC) forecast advisories the moment they are inserted into the real-time weather data stream, maximizing the number of hours of forecast utility. Tidal harmonic constituents are prescribed at the open water boundaries and applied as tidal potentials in the interior of the ocean model domain. A directional surface roughness parameterization that modulates the wind speed at a given location based on the types of land cover encountered upwind, a forest canopy sheltering effect, and a spatially varying distribution of Manning’s–n friction coefficient used for computing the bottom/channel bed friction are also included in the storm surge model. Comparisons of the simulated wind speeds and phases against their real meteorological counterparts, of model elevations against actual sea surface elevations measured by NOAA tide gauges along the NC coast, and of simulated depth-averaged current velocities against Acoustic Doppler Current Profiler (ADCP) data, indicate that this new system produces remarkably realistic predictions of winds and storm surge.