Effects of suction-dredging for cockles on non-target fauna in the Wadden Sea

Suction dredging for cockles removes large cockles from tidal flats and may also cause mortality of non-target fauna and make the habitat less suitable for some species. This study examines whether suction dredging for cockles on tidal flats of the Dutch Wadden Sea had affected densities of non-target fauna, directly after fishing and one year later. Densities of non-target fauna in two randomly chosen undredged locations were compared to densities at the surrounding heavily commercially dredged area. A significant negative effect of cockle dredging on densities of 0-group Macoma balthica was observed and this effect persisted one year after dredging. The dredged area appeared to be less suitable for settlement of mussels Mytilus edulis. No significant effects of dredging on the mudsnail Hydrobia ulvae and on 0 and 1-group C. edule were found. For the mobile young Macoma balthica it seems unlikely that the effect found after one year was still due to the mortality caused by dredging and this suggests that the habitat was less suitable as a consequence of dredging. Thus, even in the highly dynamic ecosystem of the Wadden Sea, effects of bottom disturbance by cockle dredging may persist after one year.     

Short-term and interannual variability of redox-sensitive chemical parameters in hypoxic/anoxic bottom waters of the Chesapeake Bay

A combination of CTD casts, discrete bottle sampling and in situ voltammetric microelectrode profiling was used to examine changing redox conditions in the water column at a single station south of the Bay Bridge in the upper Chesapeake Bay in late July/early August, 2002–2005. Short-term (2–4 h) fluctuations in the oxic/suboxic/anoxic interface were documented using in situ voltammetric solid-state electrodes. Profiles of dissolved oxygen and sulfide revealed tidally-driven vertical fluctuations of several meters in the depth and thickness of the suboxic zone. Bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺ also varied over the tidal cycle by approximately an order of magnitude. These data indicate that redox species concentrations at this site varied more due to physical processes than biogeochemical processes. Based on analysis of ADCP data, tidal currents at this station were strongly polarized, with the principal axis of tidal currents aligned with the mainstem channel. Together with the chemical data, the ADCP analysis suggests tidal flushing of anoxic bottom waters with suboxic water from north of the site. The present study is thus unique because while most previous studies have focused on processes across relatively stable redox interfaces, our data clearly demonstrate the influence of rapidly changing physical mixing processes on water column redox chemistry.Also noted during the study were interannual differences in maximum bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺. In 2003, for example, heavy spring rains resulted in severe hypoxia/anoxia in June and early July. While reported storm-induced mixing in late July/early August 2003 partially alleviated the low-oxygen conditions, bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺ were still much higher than in the previous year. The latter implies that the response time of the microbial community inhabiting the suboxic/anoxic bottom waters to changing redox conditions is slow compared to the time scale of episodic mixing events. Bottom water concentrations of the redox-sensitive chemical species should thus be useful as a tracer to infer prior hypoxic/anoxic conditions not apparent from ambient oxygen levels at the time of sampling.     

The morphodynamic modelling of tidal sand waves on the shoreface

An artificial sand wave on the Dutch shoreface of the North Sea has been studied in conditions with relatively strong tidal currents in the range of 0.5 to 1 m/s and sediments in the medium sand size range of 0.2 to 0.5 mm. The sand wave is perpendicular to the tidal current and has a maximum height and length of the order of 5 m and 1 km, respectively. The sand wave is dynamically active and shows migration rates of the order of a few metres per year. A numerical morphodynamic model (DELFT3D model) has been used to simulate the morphological behaviour of the sand wave in the North Sea. This model approach is based on the numerical solution of the three-dimensional shallow water equations in combination with a surface wave propagation model (wind waves) and the advection–diffusion equation for the sediment particles with online bed updating after each time step. The model results show that the sand wave grows in the case of dominant bed-load transport (weak tidal currents; relatively coarse sediment; small roughness height; low waves) and that the sand wave decays in the case of dominant suspended transport (strong currents, relatively fine sediment, large roughness height; storm waves).     

The impact of shrimp trawling and associated sediment resuspension in mud dominated, shallow estuaries

To address the relative importance of shrimp trawling on seabed resuspension and bottom characteristics in shallow estuaries, a series of disturbance and monitoring experiments were conducted at a bay bottom mud site (2.5 m depth) in Galveston Bay, Texas in July 1998 and May 1999. Based on pre- and post-trawl sediment profiles of ⁷Be; pore water dissolved oxygen and sulfide concentration; and bulk sediment properties, it was estimated that the trawl rig, including the net, trawl doors, and “tickler chain,” excavate the seabed to a maximum depth of approximately 1.5 cm, with most areas displaying considerably less disturbance. Water column profile data in the turbid plume left by the trawl in these underconsolidated muds (85–90% porosity; <0.25 kPa undrained shear strength) demonstrate that suspended sediment inventories of up to 85–90 mg/cm² are produced immediately behind the trawl net; an order of magnitude higher than pre-trawl inventories and comparable to those observed during a 9–10 m/s wind event at the study site. Plume settling and dispersion caused suspended sediment inventories to return to pre-trawl values about 14 min after trawl passage in two separate experiments, indicating particles re-settle primarily as flocs before they can be widely dispersed by local currents. As a result of the passage of the trawl rig across the seabed, shear strength of the sediment surface showed no significant increase, suggesting that bed armoring is not taking place and the trawled areas will not show an increase in critical shear stress.     

The impact of the M2 internal tide on data-assimilative model estimates of the surface tide

We use a synthetic data experiment to assess the accuracy of ocean tides estimated from satellite altimetry data, with emphasis on the impact of the phase-locked internal tide, which has a surface expression of several centimeters near its sites of genesis. Previous tidal estimates have regarded this signal as a random measurement error; however, it is deterministic and not scale-separated from the barotropic (surface) tide around complex bathymetric features. The synthetic data experiments show that the internal tide has a negligible impact on the barotropic tidal fields inferred under these circumstances, and the barotropic dissipation (a quadratic functional of the tidal fields) is in good agreement with the energetics of the three-dimensional regional primitive equations model which is the source of the synthetic data.     

The effect of tidal inlets on open coast storm surge hydrographs

Bridge scour modeling requires storm surge hydrographs as open ocean boundary conditions for coastal waters surrounding tidal inlets. These open coast storm surge hydrographs are used to accurately determine both horizontal and vertical circulation patterns, and thus scour, within the inlet and bay for an extreme event. At present, very little information is available on the effect that tidal inlets have on these open coast storm surge hydrographs. Furthermore, current modeling practice enforces a single design hydrograph along the open coast boundary for bridge scour models. This study expands on these concepts and provides a more fundamental understanding on both of these modeling areas.     

Application of a two-dimensional depth-averaged hydrodynamic tidal model

A two-dimensional hydrodynamic model application to the San Francisco Bay was performed using the Boundary-Fitted HYDROdynamic model (BFHYDRO). The model forcing functions consist of tidal elevations along the open boundary and fresh water flows from the Delta Outflow. The model-predicted surface elevations compare well with the observed surface elevations at five stations in San Francisco Bay. Mean error in the model predicted surface elevations and currents are less than 7 and 9%, respectively. Correlation coefficients for surface elevations and currents are higher than 0.94 and 0.95, respectively. The amplitudes and phases of the principal tidal constituents at 24 tidal stations in San Francisco Bay, obtained from a harmonic analysis of a 90-day simulation compare well with the observed data. The predicted amplitude and phase of the M₂ tidal constituent at these stations are respectively within 8 cm and 8° of the observed data. Maximum errors in the K₁ harmonic amplitudes and phases are less than 3 cm and 7° respectively. The asymmetric diurnal and semi-diurnal tidal ranges and spring and neap tidal cycles of the surface elevations and currents are well reproduced in the model at all stations.     

The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound

Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress.     

我国浅海滩涂资源开发与对策

我国浅海滩涂开发已成为海洋开发的战场和向深海远洋挺进的桥头堡，但存在管理混乱，资源浪费和破坏严重，争抢资源等海事纠纷上升，海洋劳力素质和劳效下降等问题，应采取优化资源配置，加强政策立法，重视科技投入，强化综合管理等对策，促其健康发展。     

分潮波模型多资料数值计算方法研究 Ⅰ.岸边资料运动学外推的第一边值方法

对于含多资料三维分潮波模型建立了一种岸边资料运动学外推的潮波第一边值方法，并对渤海的四大原湖波进行试算。结果证实本方法可行，该方法使潮波方程既满足第一边值问题，充分利用岸边测站资料，又保证岸界法向流速为零条件，符合物理意义。并对复型病态矩阵的收敛问题提出了一种可行性处理。