Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.     

Computation of Large Anisotropic Seismic Heterogeneities (CLASH)

A general tomographic technique is designed in order (i) to operate in anisotropic media; (ii) to account for the uneven seismic sampling and (iii) to handle massive data sets in a reasonable computing time. One modus operandi to compute a 3-D body wave velocity model relies on surface wave phase velocity measurements. An intermediate step, shared by other approaches, consists in translating, for each period of a given mode branch, the phase velocities integrated along ray paths into local velocity perturbations. To this end, we develop a method, which accounts for the azimuthal anisotropy in its comprehensive form. The weakly non-linear forward problem allows to use a conjugate gradient optimization. The Earth's surface is regularly discretized and the partial derivatives are assigned to the individual grid points. Possible lack of lateral resolution, due to the inescapable uneven ray path coverage, is taken into account through the a priori covariances on parameters with laterally variable correlation lengths. This method allows to efficiently separate the 2ψ and the 4ψ anisotropic effects from the isotropic perturbations. Fundamental mode and overtone phase velocity maps, derived with real Rayleigh wave data sets, are presented and compared with previous maps. The isotropic models concur well with the results of Trampert & Woodhouse. Large 4ψ heterogeneities are located in the tectonically active regions and over the continental lithospheres such as North America, Antarctica or Australia. At various periods, a significant 4ψ signature is correlated with the Hawaii hotspot track. Finally, concurring with the conclusions of Trampert & Woodhouse, our phase velocity maps show that Rayleigh wave data sets do need both 2ψ and 4ψ anisotropic terms.     

Calculated Phase Relations in the System Na2O-CaO-K2O-FeO-MgO-Al2O3-SiO2-H2O with Applications to UHP Eclogites and Whiteschists

Pressure–temperature grids in the system Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O and its subsystems have been calculatedin the range 15–45 kbar and 550–900°C, usingan internally consistent thermodynamic dataset and new thermodynamicmodels for amphibole, white mica, and clinopyroxene, with thesoftware THERMOCALC. Minerals considered for the grids includegarnet, omphacite, diopside, jadeite, hornblende, actinolite,glaucophane, zoisite, lawsonite, kyanite, coesite, quartz, talc,muscovite, paragonite, biotite, chlorite, and plagioclase. Compatibilitydiagrams are used to illustrate the phase relationships in thegrids. Coesite-bearing eclogites and a whiteschist from Chinaare used to demonstrate the ability of pseudosections to modelphase relationships in natural ultrahigh-pressure metamorphicrocks. Under water-saturated conditions, chlorite-bearing assemblagesin Mg- and Al-rich eclogites are stable at lower temperaturesthan in Fe-rich eclogites. The relative temperature stabilityof the three amphiboles is hornblende > actinolite > glaucophane(amphibole names used sensu lato). Talc-bearing assemblagesare stable only at low temperature and high pressure in Mg-and Al-rich eclogites. For most eclogite compositions, talccoexists with lawsonite, but not zoisite, in the stability fieldof coesite. Water content contouring of pressure–temperaturepseudosections, along with appropriate geotherms, provides newconstraints concerning dehydration of such rocks in subductingslabs. Chlorite and lawsonite are two important H₂O-carriersin subducting slabs. Depending on bulk composition and pressure–temperaturepath, amphibole may or may not be a major H₂O-carrier to depth.In most cases, dehydration to make ultrahigh-pressure eclogitestakes place gradually, with H₂O content controlled by divariantor higher variance assemblages. Therefore, fluid fluxes in subductionzones are likely to be continuous, with the rate of dehydrationchanging with changing pressure and temperature. Further, eclogitesof different bulk compositions dehydrate differently. Dehydrationof Fe-rich eclogite is nearly complete at relatively shallowdepth, whereas Mg- and Al-rich eclogites dehydrate continuouslydown to greater depth. KEY WORDS: dehydration; eclogites; phase relations; THERMOCALC; UHP metamorphism; whiteschists     

地震信号的相位恢复及误差分析

常见的几种地震子波有:零相位子波、最小相位子波、最大相位子波和混合相位子波。以不同类型的信号为激发子波,对不同地层模型合成地震道。仅用原始合成地震道记录的振幅谱来恢复原始记录,讨论不同方法下,由于激发子波的不同,对比分析原始记录与恢复记录的差异,及其恢复效果。     

裂隙型单斜介质中弹性系数的计算及波的传播特性研究

根据Hudson等关于裂隙介质弹性系数计算的扰动理论及Bond变换矩阵原理，给出了各向同性介质中含多组垂直裂隙时等效弹性系数的计算方法。计算了含两组斜交的垂直裂隙形成的单斜各向异性介质中的等效弹性系数，并根据Christoffel方程推导、得出水平面内平面波传播的相速度和群速度随方位变化的特性。     

An automated strategy for calculation of phase diagram sections and retrieval of rock properties as a function of physical conditions

We formulate an algorithm for the calculation of stable phase relations of a system with constrained bulk composition as a function of its environmental variables. The basis of this algorithm is the approximate representation of the free energy composition surfaces of solution phases by inscribed polyhedra. This representation leads to discretization of high variance phase fields into a continuous mesh of smaller polygonal fields within which the composition and physical properties of the phases are uniquely determined. The resulting phase diagram sections are useful for understanding the phase relations of complex metamorphic systems and for applications in which it is necessary to establish the variations in rock properties such as density, seismic velocities and volatile‐content through a metamorphic cycle. The algorithm has been implemented within a computer program that is general with respect to both the choice of variables and the number of components and phases possible in a system, and is independent of the structure of the equations of state used to describe the phases of the system.     

Structure sismique du socle paléozoı̈que du bassin des Doukkala,Môle côtier,Maroc occidental. Indication en faveur de l'existence d'une phase éo-varisqueSeismic structure of the Doukkala basin,Palaeozoic basement,western Morocco: a hint for an Eovariscan fold-and-thrust belt

Seismic profiles and well data from the Doukkala basin unravel the structure of the Palaeozoic basement and suggest that this coastal zone of western Morocco was affected by a compressive phase during the Frasnian. This resulted in the formation of upright, plurikilometric folds associated with reverse faults (North Doukkala), and of asymmetrical folds associated with mostly west verging ramps (South Doukkala). Folding involved all pre-Upper Frasnian formations and caused partial or total hiatus of Upper Frasnian–Strunian strata. This event can be correlated with the orogenic phase reported from more internal domains of the Morocco Hercynian belt, where it is referred to as the ‘Bretonne’ or ‘Eovariscan’ phase. To cite this article: H. Echarfaoui et al., C. R. Geoscience 334 (2002) 13–20     

Simulation of artificial random field considering the temporal-spatial variation

Introduction For the seismic design of special structures such as nuclear power station, marine platform, long-span bridge and dam, generally the time-history response analysis of the structure under seismic excitation is imperative, which was coded in most seismic design codes. The earthquake records suitable for the seismic situation and site condition are necessary to be used as the seismic input in the dynamic analysis of structures. As a result of the limited observational condition of st…