Characterisation of carbonate minerals from hyperspectral TIR scanning using features at 14 000 and 11 300 nm

Rapid characterisation of carbonate phases in hyperspectral reflectance spectra acquired from drill core material has important implications for mineral exploration and resource modelling. Major infrared active features of carbonates lie in the thermal region around 6500 nm, 11 300 nm and 14 000 nm, with the latter two features being most useful for differentiating mineral species. A scatter diagram of the wavelength of the 14 000 nm feature vs that of the 11 300 nm feature, powerfully differentiates carbonates. Although the wavelength of the 11 300 nm peak is easily measured, the 14 000 nm trough and peak are commonly weak and their wavelengths can confidently be used only after filtering the spectra, e.g. selecting only those with the trough and peak separated by 175–230 nm, typical of common carbonates. The method is demonstrated with drillhole 120R from the Rosebery polymetallic VHMS deposit in western Tasmania, which has been scanned with the HyLogger-3 system. A 14 000–11 300 plot shows a high degree of clustering of the drillhole 120R data close to the library spectra of calcite, dolomite, Fe-dolomite, ankerite, kutnohorite, rhodochrosite, Fe-rhodochrosite and siderite. The interpreted compositions of the carbonate spectral populations strongly correlate with the chemical populations of 144 analysed carbonates and provide a highly resolved spatial framework for interpreting carbonate alteration.     

低温低压条件下辉石粉末的热导率实验分析:对月球及火星表面热环境研究的指示

在真空条件下矿物粉末热导率的实验测量,可为我们研究月球及行星表面的热属性和热演化,解译热红外和微波探测数据,开展月球及行星探测载荷设计提供重要的数据参数。本研究主要采用改造后的Hot Disk TPS 2500S导热仪对辉石粉末的热导率进行测量。同时,分析了真空度、温度对辉石粉末热导率的影响。实验结果表明:1)热导率随着真空度的降低呈下降趋势,大气压力在1000Pa时,辉石粉末热传导机制发生明显改变。在低压条件下(1000Pa)热导率随真空度的变化趋于平缓;2)辉石粉末热导率随温度的升高而增大,但是增大的幅度在低压和常压条件下存在明显差异。根据实验结果,提出了低压条件下辉石粉末热导率随真空度和温度变化的关系式。本研究表明,在月球和火星表面热环境的研究中,温度和压力对热导率的影响程度是不同的。上述结果对未来开展地外样品的热导率测量提供了重要的参考。     

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

2017年6月一次华南沿海强降水的对流性特征及热动力机制研究

在华南北部或长江流域有锋面雨带活动时,华南沿海常常会出现对流性强降水,突发性很强,给预报造成很大的困惑。文章采用多种观测资料、ERA-Interim 0.125°×0.125°逐6 h再分析资料,对2017年6月15～16日华南北部的锋面雨带及沿海强降雨过程开展分析,对比了二者降水特征与环境条件,重点探讨了该次过程华南沿海强降雨的对流触发与维持,揭示了一种由边界层风切变强迫造成涡度持续发展的动力效应。结果表明:（1）锋面雨带与华南沿海强降雨在降水特征上有显著差异,并各有特点。锋面雨带以大尺度层状云降水和弱对流性降水为主,降水强度东段弱西段强。沿海强降雨以对流性降水为主,局地性强、落区集中、强降雨持续时间长、夜发性明显。（2）水汽方程诊断发现沿海强降雨在边界层水平水汽平流项、垂直水汽输送项比锋面雨带东段具有更大量级,大气层结反映出更深厚的暖层、湿层与对流不稳定,是二者降水强度及性质差异的主要原因。（3）莲花山、峨眉嶂造成气流侧向摩擦与正面阻挡促使漯河河谷内垂直涡度发展,暖湿空气堆积上升并达到自由对流高度,触发了华南沿海最初的降水。夜间建立的西南风急流使边界层垂直风速切变增强,水平涡度倾斜部分转化为垂直涡度发展,与风速水平切变造成的垂直涡度叠加,是强降雨持续时间长的动力机制。海陆边界摩擦差异造成水平、垂直两个方向的风切变增强,共同强迫垂直涡度发展是此次强降雨过程对流维持的动力效应。（4）方程诊断表明华南沿海强降雨由对流潜热释放造成的垂直上升速度占总垂直上升速度的39%～75%,持续、稳定的对流潜热释放是强降雨持续时间长的热力驱动因素。     

鄂西-渝东地区热史恢复及烃源岩成烃史

根据鄂西—渝东地区镜质体反射率数据进行的热史恢复结果表明:该区在晚二叠世初期达到最高古热流(可达68~78mW/m²,地表热流),从晚二叠世初到现今古热流持续降低,在侏罗纪末期古热流平均为~54mW/m²(地表热流);鄂西—渝东地区中生界与新生界之间不整合面的剥蚀量可达1700~4000m。成烃史研究表明:鄂西—渝东地区志留系烃源岩在晚志留世—早二叠世进入生油高峰,在早-中三叠世进入生气期,中侏罗世晚期进入过成熟干气阶段,快速生烃时期是在晚志留世、二叠纪—中三叠世及早-中侏罗世;而二叠系烃源岩在早三叠世进入生油门限,于中-晚三叠世达到生油高峰,在中-晚侏罗世进入生气期,晚侏罗世晚期进入过成熟,快速生烃时期是在早-中三叠世及侏罗纪。     

2020年新疆于田Ms6.4地震前热红外亮温异常研究

获取了2020年4-7月新疆于田Ms6.4地震区周边约400 km范围内连续的中国气象卫星FY-2G遥感热红外资料,选取北京时间凌晨1:00～5:00时的分钟值数据,经过小波变换和功率谱估计法进行处理,得到研究区地震前后相对功率谱异常演化过程,对比分析了 2019年相同频率同期的相对功率谱幅值,并讨论了异常时间演化过程...     

非均匀介质热蠕变流动的数值求解

针对非均匀介质中热蠕变流动问题,给出了有限单元方法与网格－粒子方法联合求解新技术,即有限单元方法求解欧拉网格节点上的未知量,分布于单元内部作为物质成分标记的粒子反映变形过程.有限元法求解动量方程和连续性方程时引入了速度场和压力场等阶插值的压力场稳定的Petrov Galerkin方法,求解能量方程时采用了流线迎风Petrov Galerkin方法,网格－粒子算法中采用双线性插值与有限单元插值函数对应.有限单元计算与网格－粒子计算相对独立,两种方法计算的数据通过有限单元节点传递.同时,实现了三角形单元的算法和程序,解决了复杂结构条件下不规则网格计算的问题.通过经典方腔热对流问题验证了程序,给出了不规则形态块体沉降算例,并分析了数值解的稳定性.     

NaCl 溶液闪蒸效率特性数值研究

盐水闪蒸技术广泛应用于海水淡化及海洋温差能发电,含盐质量分数、给盐液温度和闪蒸压力对闪蒸汽化率和热效率有很大影响。在质量分数为3.5%～20%、给盐液温度为30～95℃和闪蒸压力为1～30 kPa的范围内,对NaCl溶液闪蒸汽化率和热效率等闪蒸效率特性进行了定量计算研究,研究得到了盐水含盐质量分数、给盐液温度和闪蒸压力对闪蒸汽化率以及热效率影响的规律。结果表明,降低含盐质量分数,提高给盐液温度,降低闪蒸压力可提高闪蒸汽化率与热效率;含盐质量分数越高,造成的热损失越大,而提高给盐液温度会增大热损失。     

Thermal regime of the northwest Indian rifted margin – Comparison with predictions

We use a simple approach to estimate the present-day thermal regime along the northwestern part of the Western Indian Passive Margin, offshore Pakistan. A compilation of bottom borehole temperatures and geothermal gradients derived from new observations of bottom-simulating reflections (BSRs) allows us to constrain the relationship between the thermal regime and the known tectonic and sedimentary framework along this margin. Effects of basin and crustal structure on the estimation of thermal gradients and heat flow are discussed. A hydrate system is located within the sedimentary deep marine setting and compared to other provinces on other continental margins. We calculate the potential radiogenic contribution to the surface heat flow along a profile across the margin. Measurements across the continental shelf show intermediate thermal gradients of 38–44 °C/km. The onshore Indus Basin shows a lower range of values spanning 18–31 °C/km. The Indus Fan slope and continental rise show an increasing gradient from 37 to 55 °C/km, with higher values associated with the thick depocenter. The gradient drops to 33 °C/km along the Somnath Ridge, which is a syn-rift volcanic construct located in a landward position relative to the latest spreading center around the Cretaceous–Paleogene transition.