Classifying high-prevalence neighborhoods for cardiovascular disease in Texas

Cardiovascular disease (CVD) is the number one cause of death in the state of Texas. In order to develop effective healthcare policies to combat CVD, it is essential to understand what types of communities are most affected. In this paper, we develop a classification scheme to segment high-prevalence communities based on selected social and demographic characteristics. We find that while many high-prevalence areas reflect traditional relationships between socioeconomic deprivation and poor health outcomes, a subset of more affluent communities in Texas are also affected. This suggests the importance of tailored approaches to prevention that account for this diversity among high-prevalence neighborhoods.     

Studies on turbulent diffusion processes and evaluation of diffusivity values from hydrodynamic observations in Corpus Christi Bay

The physical process of dispersion which can be attributed to turbulence (turbulent diffusion) or shear (shear-augmented diffusion) within the flow field is very important as it ultimately governs the distribution of constituents of interest within the environment. A series of diffusion experiments were conducted in Corpus Christi Bay, TX with the purpose of characterizing turbulent diffusion through dispersion coefficients or turbulent diffusivity, K_i (i=x, y, z) dependent on the degree of randomness or turbulence intensity, I.Measured with a boat-mounted acoustic doppler current profiler (ADCP), the Eulerian velocity time-series of fluid particles in random motion, u_i was used in the evaluation of the Eulerian time-scale of turbulence, T^E based on the velocity correlation function, R^E with T^E being related to the Lagrangian time-scale T^L through a scaling parameter, β(=T^L/T^E). Surface currents were obtained with high frequency (HF) Radar equipment deployed over the study area from which the horizontal velocity gradients were determined.Within the spatial scale of the experiment (1000 m), the observed low horizontal gradients (10⁻⁴ s⁻¹) allowed for the generation of velocity time-series from an ADCP mounted on a moving platform. A numerical scheme for evaluating turbulent diffusivity values was developed on the basis of Eulerian current measurements and calibrated through the statistics of an evolving dye patch for the scaling parameter β which in this scheme was found to be in the range 1–3.     

Thermal maturity and organic composition of Pennsylvanian coals and carbonaceous shales, north-central Texas: Implications for coalbed gas potential

Thermal maturity was determined for about 120 core, cuttings, and outcrop samples to investigate the potential for coalbed gas resources in Pennsylvanian strata of north-central Texas. Shallow (< 600 m; 2000 ft) coal and carbonaceous shale cuttings samples from the Middle-Upper Pennsylvanian Strawn, Canyon, and Cisco Groups in Archer and Young Counties on the Eastern Shelf of the Midland basin (northwest and downdip from the outcrop) yielded mean random vitrinite reflectance (R_o) values between about 0.4 and 0.8%. This range of R_o values indicates rank from subbituminous C to high volatile A bituminous in the shallow subsurface, which may be sufficient for early thermogenic gas generation. Near-surface (< 100 m; 300 ft) core and outcrop samples of coal from areas of historical underground coal mining in the region yielded similar R_o values of 0.5 to 0.8%. Carbonaceous shale core samples of Lower Pennsylvanian strata (lower Atoka Group) from two deeper wells (samples from ~ 1650 m; 5400 ft) in Jack and western Wise Counties in the western part of the Fort Worth basin yielded higher R_o values of about 1.0%. Pyrolysis and petrographic data for the lower Atoka samples indicate mixed Type II/Type III organic matter, suggesting generated hydrocarbons may be both gas- and oil-prone. In all other samples, organic material is dominated by Type III organic matter (vitrinite), indicating that generated hydrocarbons should be gas-prone. Individual coal beds are thin at outcrop (< 1 m; 3.3 ft), laterally discontinuous, and moderately high in ash yield and sulfur content. A possible analog for coalbed gas potential in the Pennsylvanian section of north-central Texas occurs on the northeast Oklahoma shelf and in the Cherokee basin of southeastern Kansas, where contemporaneous gas-producing coal beds are similar in thickness, quality, and rank.     

A complete titanosaur femur from West Texas with comments regarding hindlimb posture

An isolated titanosaur femur recovered from the Javelina Formation (Maastrichtian) of Big Bend National Park, Texas is the most complete example yet reported from North America. The specimen is likely referable to Alamosaurus sanjuanensis, the only titanosaur thus far known from Upper Cretaceous strata in North America, but cannot be attributed with certainty to that taxon. Compared to femora from other titanosaurs, the specimen has a relatively reduced abductor crest, a less elevated femoral head, and a distal joint surface that is orthogonal to the long axis of the shaft. These differences suggest that the Big Bend femur pertains to a species where hindlimb stance was closer to vertical, and with a comparatively narrower gait than other titanosaurids.     

Late Cambrian microbial build-ups,Llano Area,Central Texas: A three-phase morphological evolution

Although Late Cambrian microbial build-ups were recognized in the Point Peak Member of the Wilberns Formation in Central Texas (USA) nearly 70 years ago, only a few studies focused specifically on the build-ups themselves. This study focuses on the interpretation of the regional (15 measured sections described in literature representing an area of 8000 km²) and local (field and drone photogrammetry studies in a 25 km² area from within south Mason County) microbial build-up occurrence, describes their growth phases and details their interactions with the surrounding inter-build-up sediments. The study establishes the occurrence of microbial build-ups in the lower and upper Point Peak members (the Point Peak Member is informally broken up into the lower Point Peak and the upper Point Peak members separated by Plectotrophia zone). The lower Point Peak Member consists of three <1 m thick microbial bioherms and biostrome units, in addition to heterolithic and skeletal/ooid grainstone and packstone beds. One, up to 14 m thick, microbial unit associated with inter-build-up skeletal and ooid grainstone and packstone beds, intercalated with mixed siliciclastic–carbonate silt beds, characterizes the upper Point Peak member. The microbial unit in the upper Point Peak member displays a three-phase growth evolution, from an initial colonization phase on flat based, rip-up clast lenses, to a second aggradation and lateral expansion phase, into a third well-defined capping phase. The ultimate demise of the microbial build-ups is interpreted to have been triggered by an increase of water turbidity caused by a sudden influx of fine siliciclastics. The lower Point Peak member represents inner ramp shallow subtidal and intertidal facies and the upper Point Peak member corresponds to mid-outer ramp subtidal facies. Understanding the morphological architecture and depositional context of these features is of importance for identifying signatures of early life on Earth.     

Horizontal water trap for measurement of aeolian sand transport

A new type of horizontal trap was developed for measuring the aeolian sand transport rate on a flat surface. The trap consists of an adjustable frame that is embedded level with the sand surface, into which a plastic liner is installed and filled with water to capture the blown sand. The water trap has high efficiency and does not disturb the wind field or induce upwind scour. Deployment on Padre Island, Texas, indicated that this portable and adjustable trap catches and retains all the sand blown into it, even under relatively strong wind. Copyright © 1999 John Wiley & Sons, Ltd.     

Avulsion regimes in southeast Texas rivers

Avulsions – relatively sudden changes in course, or establishment of new anabranches – are an important process in alluvial rivers. Their key role in floodplain construction and alluvial architecture, and the general conditions favouring avulsions, are well known. However, avulsion processes and evolution, and the factors controlling avulsion regimes, are poorly understood. In the southeast Texas coastal plain, where avulsions are common features of the river valleys, avulsions were studied on the lower Brazos, Navasota, Trinity, Neches and Sabine rivers using a combination of aerial imagery, digital elevation models and field surveys. Avulsions have important influences on the surface morphology and contemporary processes in all five rivers. Features associated with avulsions are active and distinct throughout the study area, and all the rivers have experienced geologically (if not historically) recent avulsions. However, no two of the study rivers have the same contemporary avulsion regime. First‐order differences in avulsion style are controlled by the stage of valley filling, and within the three rivers characterized by an unfilled incised valley, antecedent morphology associated with late Quaternary and Holocene coastal and fluvial‐deltaic processes accounts for the major differences. In the Navasota (27 avulsions in 185 km) and Neches (21 in 340 km) rivers, subchannels associated with avulsions exist in all stages of development from active to infilled, and some have occurred in recent decades. The other rivers have fewer avulsions, but both the Sabine and Trinity have experienced historic channel shifts. Only the Brazos River has experienced no avulsions within the past c. 300 years. Results show that even within a region of similar environmental controls and geological history local variations in inherited morphology can result in different avulsion regimes. Copyright © 2008 John Wiley & Sons, Ltd.     

Benthic nutrient regeneration in South Texas coastal waters

Because of the variable, unpredictable nature of many potential nutrient sources for coastal phytoplankton primary production needs in the north-western Gulf of Mexico, benthic regeneration was investigated as a more constant source of nutrients to this ecosystem. Water column ammonia profiles taken at several locations on the south Texas inner-shelf in the last seven years showed peak concentrations in bottom waters. Benthic chamber measurements verified the presence of ammonia fluxes at the mud-water interface in south Texas coastal waters. These fluxes were related to benthic faunal activity as measured by sediment metabolism. Laboratory experiments, designed to test the effect of benthic faunal removal on nutrient regeneration, suggested that the fauna play a role in regulating this process. How this regulation may occur is discussed. It was estimated that annual benthic regeneration rates can supply 69% of the nitrogen required to support phytoplankton primary production in these coastal waters.     

Depositional environments of Late Eocene lignite-bearing strata, east-central Texas

Late Eocene lignites in the Brazos River Valley area occur in parasequence-scale cycles containing mostly marine sediments. Lignite is present at the base of the marine interval and forms the base of the cycle in a majority of cases. Less frequently, lignite is underlain by a thin interval of nonmarine deposits that form the base of the cycle. In both situations, the lignite is part of a thin transgressive interval. Cycles are separated by an exposure surface, usually marked by plant rooting and/or development of a paleosol in the top of the underlying sediments. Peat accumulated on top of these exposure surfaces and lignite is preserved where marine flooding allowed ocean waters to cover the peat deposits with fine grained sediments, producing high-ash lignite horizons of great lateral extent but variable thickness and quality. This strandplain model of lignite occurrence provides a better understanding of Late Eocene lignites in Texas than the deltaic or fluvial-deltaic models previously used. The strandplain model of lignite occurrence is appropriate for most of the Yegua-Jackson lignites (Middle-Late Eocene) of Texas and should be considered when evaluating depositional conditions of Paleogene lignites in the northern Gulf Coast region. A re-evaluation of Late Eocene stratigraphy of the Brazos Valley area accompanies the documentation of depositional environments.