油田污水中Fe2+,S2-,DO及pH值对HPAM-酚醛CDG成胶性能影响的研究

在对河南油田双河矿区油田污水进行全分析的基础上，研究了污水中Fe^2 ,S^2-，溶解氧（DO）及污水的pH值对有机交联体系聚丙烯酰胺（HPAM）－酚醛胶态分散凝胶（CDG）成胶性能的影响。研究结果表明，Fe^2 ,S^2－，DO及污水的pH值对HPAM－酚醛体系的成胶性能都有影响当ρ（Fe^2 )=1.6mg/L,ρ（S^2-)=0.1mg/L,ρ（DO）=1.6mg/L，HPAM－酚醛体系就不能成胶；随着污水pH值的增大，CDG强度变弱。     

班公湖—怒江构造带西段三叠纪—侏罗纪构造—沉积演化

班公湖－怒江构造带西段在大地构造位置上处于特提斯构造域东端，横跨班公湖－怒江断裂带。三叠纪－株罗纪期间，其构造－沉积演化经历了大陆初始裂谷（T）、原洋裂谷（J1）、残余弧后盆地（J2－J3）阶段。初始裂谷阶段的拉张是呈南断北超的半地堑式由东向西进行的，逐渐形成地堑式原洋裂谷盆地。中晚侏罗世，南部新特提斯洋壳开始北各俯冲,产生的区域挤压应力使原洋裂谷逐渐封闭，裂谷盆地的小洋壳表现出以南向俯冲为主的双向式腑冲，同时伴生区域热沉降，盆地具残余弧后盆地的性质。该阶段,羌南地区发育碳酸盐岩为主的稳定陆缘沉积，冈度斯－念青唐古拉板片北部则形成广泛南超的近源碎屑沉积。     

资源勘查图件计算机辅助编绘系统的结构分析与开发策略研究

如何站在信息系统的高度来进行资源图件计算机辅助编绘系统的快速开发，是资源信息系统领域计算机应用的一个重要研究课题。在结构分析的基础上，将资源图件计算机辅助编绘系统划分为图形数据库，应用图形系统和基础图形系统3个基本部分。对于复杂资源图件的计算机辅助编绘，需要地矿点源信息系统的支持。在基础图形系统上进行专业编绘程序的二次开发是高效建立图件编绘系统的最佳途径，并需注意GIS集成应用，三维可视化，人工智能和参数化设计等方法的运用，而系统平台开发是复杂应用的高级阶段。该思想可应用于煤及油气勘探，工程开发，矿区管理及区域地质等诸多领域的软件开发中。     

基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。     

雷达遥感在澜沧江中下游地区锰矿调查评价中的应用

澜沧江吓游地区地处热带-亚热带，植被及第四系覆盖严重，应用雷达遥感技术可以初步揭露植覆盖，利用SAR图像识别主要岩石类型和构造形式，并圈定了主要含锰岩系，进而确定了成锰有利地段。     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Comparative response analysis of conventional and innovative seismic protection strategies

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

全谱直读等离子发射光谱法直接测定天然矿泉水中的SO2-4

采用全谱直读等离子发射光谱(ICP-AES)直接测定天然矿泉水中SO2-4的方法在优化工作条件下SO42-的测定下限为0.09mgL-1,方法简便,快速,适用于批量生产.     

青藏公路路基变形分析

为研究青藏公路多年冻土人为上限在退化过程中对路基变形产生的影响过程和程度, 在唐古拉山以南选择了3处具有代表性的路面进行了为期2 a的路面变形观测. 资料表明, 在多年冻土人为上限退化过程中随着公路路基结构、冻土类型的不同, 路基变形从冻胀和融沉过程、冻胀量和融沉量、发生的时间都有很大的不同. 在高含冰量多年冻土区采用半挖半填结构产生的路基变形最为剧烈, 在含冰量相对少且采用较高路堤结构的地段路基变形过程相对平缓. 同时结合探地雷达的勘察结果对路基下的融化区、多年冻土区的内部结构进行了分析. 结果显示,多年冻土人为上限的下移、地下冰的融化会在多年冻土人为上限以上的地质体中导致较强烈的层间错动和扰动.