Comparison of runoff characteristics of two adjacent basins in a tropical rainforest using a modified hydrologic cycle model with outflow

We propose a new runoff model including an outflow process that was applied to two adjacent basins (CL, TL) located in Lambir Hills National Park in north‐central Sarawak, Malaysia. Rainfall, runoff, topography, and soil layer thickness were observed. About 19% of annual runoff was observed in the CL basin (21.97 ha), whereas about 46% was observed in the TL basin (23.25 ha). It was inferred that the CL basin has an outflow because of low base flow, small runoff peak, and excessive water loss. By incorporating the outflow process into the HYdrological CYcle MODEL, good agreement between the data generated by the model and that observed was shown, with the exception of the data from the rainless period. Then, the fitting parameters for each basin were exchanged, except for the outflow parameter, and the characteristics of each basin were compared by calculating virtual runoff. As a result, the low base flow of the CL basin was estimated by the movement of the rainwater that escaped from the basin as deep percolation or lateral flow (11% of rainfall). The potential of the CL basin for mitigating flood and drought appeared to be higher than that of the TL basin. This is consistent with the topographic characteristics of the CL basin, which has a gentler slope than the TL basin. Copyright © 2012 John Wiley & Sons, Ltd.     

图象恢复在工业CT中的应用

对于以影象增强器为检测系统的目标旋转式工业ＣＴ，分析了其图象退化的因素，采用对一维投影数据进行图象恢复的方法来提高ＣＴ图象质量。文中给出图象恢复公式，从计算机模拟和实验图象恢复的结果可看到所用方法提高了图象清晰度。     

第14届世界无损检测大会工业CT的层析成像技术

介绍了新近１４届世界无损检测大会有关情况，并对工业ＣＴ的发展动态进行了简要的分析。     

新疆测震台网记录的远距离工业爆破分析

对新疆测震台网数字化记录中的宁夏ML4．4爆破记录进行了分析,新疆台网大部分台站都能记录到上千公里ML4.0以上的工业爆破。又对新疆巴里坤地震台记录的约1200km的宁夏ML3．8、内蒙ML4．2地震和宁夏ML4．4的工业爆破记录进行了分析,发现近距离爆破记录的特征大部分可以在远距离爆破中找到。     

Evaluation of heavy metals and arsenic speciation discharged by the industrial activity on the Tinto-Odiel estuary, SW Spain

This study reports the annual amount of heavy metals discharged by industrial activity into the estuary of the Ría of Huelva (SW Spain). The findings showed that the discharged metals found in highest amounts were Fe (11 t y⁻¹), Zn (3.4 t y⁻¹) and Mo (0.88 t y⁻¹). There were other metals with high pollutant charge, such as Ti (232 kg y⁻¹), As (228 kg y⁻¹), Ni (195 kg y⁻¹), Pb (100 kg y⁻¹), Cr (39 kg y⁻¹) and Cd (33 kg y⁻¹). These results were compared with pollutants transported via the Tinto and Odiel rivers from abandoned mining activities in the Iberian Pyrite Belt (IPB), and it was deduced that the amounts spilled exclusively by industries were less than 1% in relation to the total discharge. Hence, the treatment of residues from the IPB should be the priority goal to improve water quality in the estuary.     

Heavy Metal Pollution in Sediments from Aquatic Ecosystems in China

We conducted an analysis of heavy metals content, including As, Cd, Cr, Cu, Hg, Pb, and Zn in sediments from aquatic ecosystems in China measured in recent publications. Then, we evaluated the extent of heavy metal pollution in these ecosystems in seven different industrial districts in China (Dongbei, Huabei, Huazhong, Huanan, Huaxik, Xibei, and Huadong) with the potential ecological risk index. We found that Cd was the most concentrated pollutant, followed by Hg and As, while Cr, Cu, Pb, Zn were found in low concentrations in sediments from all types of aquatic ecosystem in China. Sediments collected from all seven industrial districts were heavily polluted, and the sequence, from most to least polluted was Dongbei>Huabei>Huazhong>Huanan>Huaxi>Xibei>Huadong. All four types of aquatic ecosystem were found to be seriously polluted and the sequence, from most to least polluted was: river>sea>lake>wetland. Specifically, Cd and Hg were the most serious pollutants in all four aquatic ecosystems, and As was also a serious pollutant in rivers. For the seven industrial districts studied the sea was the most polluted ecosystem in Dongbei, the river was the most polluted ecosystem in Huabei, Huanan, Huazhong, and the lake was the most polluted in Huadong, Huaxi, and Xibei.     

Role of time variant and invariant terms on soil moisture spatio-temporal variability in a subhumid coastal wetland

The knowledge of soil moisture spatio-temporal variability is highly relevant for water resources management. This paper reports an analysis of the spatial–temporal variability of soil moisture data for a small to medium-scale soil-sensors network in a coastal wetland of southwestern Spain. Measurements were taken from five sites located in the Doñana National Park over the time-period of one hydrological year from September 2017 to September 2018. The total area of the soil-sensors network shows an extension about 25 × 3 km. Soil moisture data was separated into time invariant (the temporal mean of the whole period at each site) and time-variant terms (the deviations of soil moisture from the mean, or anomalies). The time-invariant component was generally the main contributor to the total spatial variance of soil moisture and it was mostly controlled by the groundwater levels in the area. Nevertheless, the time variant terms have a huge effect on soil moisture variability in very dry states. Characteristic convex time-dependent patterns for this field site were found between spatially averaged soil moisture and its variability. This information could be used for the up and downscaling of soil moisture from satellite data. Those patterns of relation between spatial mean and variability of soil moisture were only affected by heavy rainfalls giving rise to hysteretic behaviour. This study shows that even though groundwater level is a time-variant variable, it significantly affects soil moisture's time-variant but also time-invariant terms due to the different average groundwater level depths at the different sites.     

工业CT技术在卫星产品检测中的应用

卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。     

Characterization of industrial wastewaters using gel-permeation chromatography with multicomponent detection

The gel-permeation chromatography system with multicomponent detection of organic carbon, organic nitrogen, organic halogen, and UV/vis absorption measurement is shown to be a useful tool for characterization of industrial wastewaters and wastewater treatment processes. The proposed system was used to investigate biologically treated wastewater from chemical industry, whereby one branch stream was identified to be the main source of persistent halogenated organics. Various treatment processes of pulp mill wastewater were also evaluated revealing that precipitation with aluminium is very effective for the removal of the high molecular fraction whereas the biological treatment is generally less selective. In the biological treatment of tannery wastewaters, it has been shown that the aerobic treatment, in contrast to anaerobic step, causes evident alterations of the composition of the polar DOC fraction. The nitrogen containing compounds are also better decomposed in the aerobic step compared to the anaerobic one.     

论工业企业防震减灾

本文论述了我国工业企业防震减灾现状，提出工业企业防震减灾的目标和指导原则，以及部分工业企业的防震减灾措施和对策。