Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.
For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of Id), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the Id parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected Id value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks. 相似文献
For more than hundred years it has been debated whether blockfields in mountain summit areas can be used to delimit the vertical extent of Pleistocene ice sheets. In this study the relationship between blockfields, developed in quartzites and sandstones on the Varanger Peninsula, northern Norway, and glacially derived features have been evaluated. Erratics and circular ablation moraines are superimposed on the blockfields and lateral meltwater channels are eroded into them. Glacial striations and other signs of glacial sculpturing are restricted to low-lying areas with channelled ice flow. Relative ages of the blockfields and the features in them are inferred, and the first measurements of in-situ produced cosmogenic nuclides from the Varanger Peninsula are reported. We conclude that the blockfields have survived underneath at least one thick, cold-based ice sheet. Thus, these blockfields cannot be used as indicators of ice-free conditions as previously suggested for southern Norway. Our results have implications for the potential for land surface preservation beneath ice sheets and for glacial reconstructions in northern Fennoscandia. 相似文献
The paper deals with stress-release effects induced by man-made cuts or excavations into natural stiff clay slopes that experienced erosion in response to valley deepening. The study was focused on the Monte Mario hill in Rome (Italy), which formed part of an area of recent urban expansion. The methodology of the study relied on a reference engineering-geology model, which was developed on the basis of site and laboratory data and stress–strain analyses. The latter analyses were carried out with the finite-difference code FLAC 4.0. Numerical modelling was based on a sequential approach, taking into account the main evolutionary stages of the Tiber river valley in Romeȁ9s urban area and then making cuts at the bottom of the slope located south of the Monte Mario Astronomical Observatory. The simulation revealed the stress-release effects that fluvial erosion and excavation fronts have caused on the investigated slopes and their consequent gravitational instabilities. These processes appear with metre-scale displacements, followed by stress-release cracks (actually observed on the slopes under review). In quantifying stress-release deformations, the simulation took into account the possible role of creep in the observed retardation of stress-release effects.Research activities were carried on with the co-operation of Dȁ9Arcangelo A. (Consorzio TREESSE, andrea.darcangelo@libero.it) and Moretti S. (IMG S.r.l. Servizi Tecnici per lȁ9Ingegneria e lȁ9Ambiente, moretti@img-srl.it) 相似文献
The elastic properties of coexisting natural 3T and 2M1 phengite samples (Cima Pal, Sesia Zone; Val Savenca; Western Alps, Italy) with similar chemical compositions have been studied by room temperature–high pressure powder diffraction, using synchrotron radiation on the ID9A beam-line at ESRF (Grenoble, France). The P–V curves have been modelled by the Birch–Murnaghan model; a third-order expansion fitted to the experimental data yields for 3T and 2M1K0=60.4(±0.7) GPa, K′=5.79(±0.11) at V0=703.8851 Å3, and K0=57.3(±1.0) GPa, K′=6.97(±0.24) at V0=938.8815 Å3, respectively. The relative stability of 3T vs. 2M1 has been explored as a function of pressure and temperature in terms of configuration and deformation contributions to the Gibbs energy, using the elastic properties determined here and other thermodynamic parameters from earlier investigations. The results presented agree with the hypothesis of stability of the 3T polytype in the high pressure regime. 相似文献
By integrating hydrological modeling with the infinite slope stability analysis, a rainfall-triggered shallow landslide model was developed by Iverson (Water Resour Res 36:1897-1910, 2000). In Iverson’s model, the infiltration capacity is assumed to be equivalent to the saturated hydraulic conductivity for finding pressure heads analytically. However, for general infiltration process, the infiltration capacity should vary with time during the period of rain, and the infiltration rate is significantly related to the variable infiltration capacity. To avoid the unrealistically high pressure heads, Iverson employed the beta-line correction by specifying that the simulated pressure heads cannot exceed those given by the beta line. In this study, the suitability of constant infiltration capacity together with the beta-line correction for hydrological modeling and landslide modeling of hillslope subjected to a rainfall is examined. By amending the boundary condition at ground surface of hillslope in Iverson’s model, the modified Iverson’s model with considering general infiltration process is developed to conduct this examination. The results show that the unrealistically high pressure heads from Iverson’s model occur due to the overestimation of infiltration rate induced from the assumption that the infiltration capacity is identical to the saturated hydraulic conductivity. Considering with the general infiltration process, the modified Iverson’s model gives acceptable results. In addition, even though the beta-line correction is applied, the Iverson’s model still produces greater simulated pressure heads and overestimates soil failure potential as compared with the modified Iverson’s model. Therefore, for assessing rainfall-triggered shallow landslide, the use of constant infiltration capacity together with the beta-line correction needs to be replaced by the consideration of general infiltration process. 相似文献