Stability and capsizing analysis of nonlinear ship rolling in wind and stochastic beam seas

Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition.     

胶州湾表层海水碳酸盐体系的季节变化

根据2007年8月(夏季),11月(秋季),2008年1月(冬季)和2010年4月(春季)在胶州湾海域测得的p H、溶解无机碳(DIC)、总碱度(Alk),以及通过以上参数计算得到的二氧化碳分压(p CO2)的数据,结合现场的化学、水文、生物等参数,探讨和分析了该海域的二氧化碳各参数的分布特征、季节变化和影响因素。结果表明:胶州湾p H、DIC、Alk和p CO2的年变化范围分别为:7.77—8.30,1949.2—2201.8μmol/kg,2033.9—2382.5μmol/kg和89.9—745.3μatm,均呈现明显的时空变化。温度是影响胶州湾碳酸盐体系的主要影响因素之一,同时陆地径流和降水会降低海水碳酸盐体系中各参数的含量,但是人类活动和生物活动也会在一定程度上增加DIC、Alk和p CO2的含量。     

CMIP5地球系统模式溶解氧模拟结果分析

本文基于常用的统计方法,通过与WOA09观测的海洋溶解氧浓度数据进行比较,定量地评估了9个CMIP5地球系统模式在历史排放试验中海洋溶解氧气候态特征的模拟能力。在海表,由于地球系统模式均能很好地模拟海表温度（SST）,模式模拟的海表溶解氧浓度分布与观测一致,模拟结果无论是全球平均浓度偏差还是均方根误差均接近0,空间相关系数与标准偏差接近1。在海洋中层以及深层这些重要水团所在的区域,各模式的模拟能力则差异较大,尤其在溶解氧低值区（OMZs）所在的500m到1000m,各模式均出现全球平均偏差、均方根误差的极大值以及空间相关系数的极小值。在海洋内部,模式偏差的原因比较复杂。经向翻转环流和颗粒有机碳通量均对模式的偏差有贡献。分析结果表明物理场偏差对溶解氧偏差的贡献较大。一些重要水团,比如北大西洋深水,南极底层水以及北太平洋中层水在极大程度上影响了溶解氧在这些海区的分布。需要指出的是,虽然在海洋内部各模式模拟的溶解氧浓度偏差较大,但是多模式平均结果却能表现出与观测较好的一致性。     

Implications of structural inheritance in oblique rift zones for basin compartmentalization: Nkhata Basin,Malawi Rift (EARS)

The Cenozoic East African Rift System (EARS) is an exceptional example of active continental extension, providing opportunities for furthering our understanding of hydrocarbon plays within rifts. It is divided into structurally distinct western and eastern branches. The western branch comprises deep rift basins separated by transfer zones, commonly localised onto pre-existing structures, offering good regional scale hydrocarbon traps. At a basin-scale, local discrete inherited structures might also play an important role on fault localisation and hydrocarbon distribution. Here, we consider the evolution of the Central basin of the Malawi Rift, in particular the influence of pre-existing structural fabrics.Integrating basin-scale multichannel 2D, and high resolution seismic datasets we constrain the border, Mlowe-Nkhata, fault system (MNF) to the west of the basin and smaller Mbamba fault (MF) to the east and document their evolution. Intra basin structures define a series of horsts, which initiated as convergent transfers, along the basin axis. The horsts are offset along a NE–SW striking transfer fault parallel to and along strike of the onshore Karoo (Permo-Triassic) Ruhuhu graben. Discrete pre-existing structures probably determined its location and, oriented obliquely to the extension orientation it accommodated predominantly strike-slip deformation, with more slowly accrued dip-slip.To the north of this transfer fault, the overall basin architecture is asymmetric, thickening to the west throughout; while to the south, an initially symmetric graben architecture became increasingly asymmetric in sediment distribution as strain localised onto the western MNF. The presence of the axial horst increasingly focussed sediment supply to the west. As the transfer fault increased its displacement, so this axial supply was interrupted, effectively starving the south-east while ponding sediments between the western horst margin and the transfer fault. This asymmetric bathymetry and partitioned sedimentation continues to the present-day, overprinting the early basin symmetry and configuration. Sediments deposited earlier become increasingly dissected and fault juxtapositions changed at a small (10–100 m) scale. The observed influence of basin-scale transfer faults on sediment dispersal and fault compartmentalization due to pre-existing structures oblique to the extension orientation is relevant to analogous exploration settings.     

基于船位监控系统的拖网捕捞努力量提取方法研究

为了基于船位监控系统提取拖网捕捞努力量,通过统计航速获得3个峰值,拖网作业在第2个峰值,即1~2.1 m/s,拖网作业航向差一般在–50°~50°。利用航速、航向差阈值设定,把拖网船状态划分为慢速、作业、航行,然后提取出捕捞作业状态点,1 423艘拖网船共提取到处于捕捞状态的点318 433个,合计拖网捕捞时间15 921 h,利用反距离加权插值法生成捕捞强度分布变化趋势图。捕捞努力量在渔业资源研究中是重要的参考值之一,与传统的捕捞努力量计算方法相比,该方法具有实时、大范围、快速、分辨率高的特点,能够用于辅助渔业资源保护。     

半潜平台浮子式系泊系统参数优化研究

通过在系泊缆中设置浮子可以改善系泊系统性能,降低平台运动响应。建立浮子式系泊系统的数值计算模型,验证浮子式系泊系统数值计算方法,详细分析浮子设计参数(设置位置和净浮力大小)变化对系泊缆张力特性与平台运动的影响规律,并根据得到的规律选择了优化的浮子系泊系统方案。最后对优化方案进行评估,表明优化方案可以显著降低系泊中的平台水平运动,尤其是低频运动,同时系泊缆张力变化不大,仍满足安全要求。研究结果可为今后浮子式系泊系统设计提供参考。     

垂荡式波浪能装置运动模型数值分析

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。     

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.     

南极长城站验潮站数据处理和潮汐特点初步分析

继在南极中山站建成我国南极首个永久性验潮站后,2012年1月在南极长城站又建成了我国南极第二个永久性验潮站。通过对长城站验潮站相关数据进行分析处理,得到了验潮基准系统的水准网平差结果和验潮仪零点标定结果,以及长城站附近海域海洋潮汐170个分潮的调和常数,并据此进行了潮汐预报,同时分析了长城站潮汐余水位的变化特征,探讨了利用附近的Antarctic Base Prat验潮站的余水位改正长城站潮汐预报的可行性,结果表明使用Antarctic Base Prat验潮站余水位改正长城站潮汐预报,可以显著提高长城站验潮站潮汐预报的精度,余水位改正后2014时段的潮汐预报中误差为±3.42 cm,明显好于改正前的预报中误差±10.43 cm。     

Integration of GIS and video surveillance

This paper discusses the integration of three-dimensional (3D) geographic information systems (GIS) and video surveillance systems using augmented reality (AR) techniques. The motivation for this integration is to overcome problems faced by conventional video surveillance systems. Explicit information concerning which camera currently monitors what area in such systems is missing; therefore, insight into the situation depends heavily on the operator’s training and experience. To ensure the complete coordination and monitoring of a situation in a system with multiple cameras, it is necessary to introduce a single reference system. GIS arises as a natural solution because it not only provides a solid ground truth but also provides semantic information that can be highly important in certain video surveillance applications. To integrate information into a GIS application, that information must be georeferenced. Based on our previous research regarding the addition of georeferencing information to surveillance video, this paper introduces models that can be applied to help integrate video and GIS. With an analogy to Milgram’s continuum between the real world and virtual reality, and analogous to the augmented reality and augmented virtuality in Milgram’s continuum, two models of integration are defined here: GIS-augmented video and video-augmented GIS. Then, we define the architecture of GIS-based video surveillance based on these proposed integration models, and finally, a prototype is implemented. The implemented prototype serves as a basis for analysing possible applications of real-world systems based on the integration of GIS and video.