Normative quartz as an indicator of the mass transfer intensity during the postmagmatic alteration of the Botuobinskaya pipe kimberlites (Yakutia)

The intensity of postmagmatic processes in the Botuobinskaya pipe kimberlites was estimated from the calculated content of normative secondary quartz (Q). Several simple algorithms are proposed to calculate the Q content from chemical analyses of kimberlites. Ten groups of altered kimberlites have been recognized from the Q contents. The contents of MgO, some trace elements, and LREE in the groups, the contents of Cr and Ca of crimson garnets, the diamond contents of kimberlites, and the average weight of diamonds decrease as the Q content increases. It is shown that the negative SiO₂–MgO correlation is the most effective indicator of the postmagmatic alteration of kimberlites. As the degree of their secondary alteration increases, the kimberlites transform into an assemblage of quartz and clay minerals enriched in some trace elements and almost completely lacking REE and diamonds.     

Fractional crystallization models and B–Be–Li systematics at Mt Somma-Vesuvius volcano (Southern Italy)

A compilation of B–Be–Li data on rocks that cover the entire eruptive history of Somma-Vesuvius is presented and interpreted in the light of evolution models for the Somma-Vesuvius rocks. Using major and trace element data, fractional crystalllization models are presented for different geochemical units. These data were used to constrain the source mineralogy of the Somma-Vesuvius rocks (ol-opx-cpx-gar-amp of 0.4-0.3-0.1-0.1-0.1), the amount of sediment added (5–10%) and the melt fraction from batch partial melting computations (0.05–0.1). From the B–Li data it is inferred that the main process responsible for the B isotopic signature is sediment recycling. However, the B–Li data show a major variation in Li abundances respect to B which is explained with Li dehydration before the fluid enriched the mantle wedge that produced the arc magmas. The Somma-Vesuvius B isotope composition is intermediate between that of the Campi Flegrei and the broad field of the Eolian Island arc. A low Be isotopes in the recent volcanic rocks can be explained as: (a) the top 1–22 m of the incoming sediment is accreted, (b) large amounts of sediment erosion, (c) a slow rate of subduction which have provoked a long magmatic history for the Vesuvius magma, (d) the sediment component takes several Myr longer than the subducting plate to reach the magma source region beneath Italy.     

Mt. Melbourne volcano,antarctica: Evidence of seismicity related to volcanic activity

Characterization of the microseismic activity (M _L <2.0) has been performed at Mt. Melbourne since 1990. We recorded a group of low frequency events with common morphological characteristics, i.e., an emerging onset, an unclear second phase and a sharply dropping coda. Spectral analysis of events recorded at more than one station indicates that the seismogram characteristics and spectral content are largely due to source effects. A polarization filter applied to a set of three component data revealed a first phase made up ofP waves followed (after about 0.9–1.4 sec.) by a second phase probably composed ofSH-type waves. Particle motion analysis detected a seismic ray angle direction mainly between N70°E and N110°E and apparent angle of incidence between 35° and 48° for the first phase. The studied seismicity was localized in an area on the eastern slope of Mt. Melbourne Volcano which presents a surface temperature anomaly (Mazzarini andSalvini, 1994). We formulate two hypotheses for the type of earthquakes recorded: 1) long-period events involving active presence of magmatic fluids in the source processes; 2) or the result of fracturing processes (shear?) in a medium characterized by transition between brittle and plastic behaviors. In the latter hypothesis the superficial thermal anomaly may be a symptom of this behavior at depth and is confirmed by the lown values observed for the exponential fit in the codaQ analysis.     

Fe-Cu-Zn-Mo同位素示踪氧化还原过程

非传统稳定同位素（Fe-Cu-Zn-Mo）理论与数据相结合提高了科研工作者对地质体系氧化还原过程的理解。本文对这一相对较新的领域进行了综述,包括与氧化还原过程相关的同位素分馏理论和实验约束、时空尺度下的氧逸度以及同位素示踪氧化还原过程。稳定同位素理论预测,Fe-Cu-Zn-Mo同位素应该对氧化还原状态的变化能够做出响应。结果表明,Fe同位素作为岩浆过程、表生过程、俯冲带流体性质"氧逸度计"应用前景广阔;Cu同位素在岩浆、热液、陆地系统可以很好地示踪氧化还原过程;Zn同位素由于络合过程分馏已经被用在许多不同环境中作为含硫/碳流体迁移的敏感示踪剂;Mo同位素作为古氧逸度计可有效重建古海洋-大气氧化还原状态。     

Aragonite cycles: diagenesis caught in the act

Organic biomarker and nannofossil assemblages are used in combination with sedimentary petrology to identify the role of diagenesis for the formation of a rhythmic calcareous succession. A record from the Early Pliocene of the Maldives (Ocean Drilling Program, ODP Leg 115) is presented containing precession and eccentricity cycles expressed as variable aragonite content. Additional sub‐Milankovitch cycles are caused by rhythmic precipitation of calcite cement in the lower part of the interval. Comparison with palaeo‐productivity indicators (nannofossils, chlorin, total organic carbon) suggests that cementation occurs preferentially in intervals characterized by increasing or decreasing productivity. The coupled variability in productivity and carbonate diagenesis is attributed to the effect of organic matter degradation in the sediment. The observed combination of primary and diagenetic factors hampers the interpretation of the cyclicity on Milankovitch and sub‐Milankovitch scales. Diagenetically stable proxies for palaeo‐productivity, such as nannofossil assemblage data, were used to distinguish between palaeoclimate and diagenetic influences.     

Genesis of chlorine and sulphur in fumarolic emissions at Vulcano Island (Italy): assessment of pH and redox conditions in the hydrothermal system

Chlorine- and sulphur-bearing compounds in fumarole discharges of the La Fossa crater at Vulcano Island (Italy) can be modelled by a mixing process between magmatic gases and vapour from a boiling hydrothermal system. This allows estimating the compounds in both endmembers. Magma degassing cannot explain the time variation of sulphur and HCl concentrations in the deep endmember, which are more probably linked to reactions of solid phases at depth, before mixing with the hydrothermal vapours. Based on the P–T conditions and speciation of the boiling hydrothermal system below La Fossa, the HCl and S_tot contents in the hydrothermal vapours were used to compute the redox conditions and pH of the aqueous solution. The results suggest that the haematite–magnetite buffer controls the hydrothermal fO₂ values, while the pH has increased since the end of the 1970s. The main processes affecting pH values may be linked to Na–Ca exchanges between evolved seawater, feeding the boiling hydrothermal system, and local rocks. While Na is removed from water, calcium enters the solution, undergoes hydrolysis and produces HCl, lowering the pH of the water. The increasing water–rock ratio within the hydrothermal system lowers the Ca availability, so the aqueous solution becomes less acidic. Seawater flowing towards the boiling hydrothermal brine dissolves a large quantity of pyrite along its path. In the boiling hydrothermal system, dissolved sulphur precipitates as pyrite and anhydrite, and becomes partitioned in vapour phase as H₂S and SO₂. These results are in agreement with the paragenesis of hydrothermal alteration minerals recovered in drilled wells at Vulcano and are also in agreement with the isotopic composition of sulphur emitted by the crater fumaroles.     

3D shear-wave velocity structure of the Eifel plume, Germany

The Quaternary Eifel volcanic fields, situated on the Rhenish Massif in Germany, are the focus of a major interdisciplinary project. The aim is a detailed study of the crustal and mantle structure of the intraplate volcanic fields and their deep origin. Recent results from a teleseismic P-wave tomography study reveal a deep low-velocity structure which we infer to be a plume in the upper mantle underneath the volcanic area [J.R.R. Ritter et al., Earth Planet. Sci. Lett. 186 (2001) 7-14]. Here we present a travel-time investigation of 5038 teleseismic shear-wave arrivals in the same region. First, the transverse (T) and radial (R) component travel-time residuals are treated separately to identify possible effects of seismic anisotropy. A comparison of 2044 T- and 2994 R-component residuals demonstrates that anisotropy does not cause any first-order travel-time effects. The data sets reveal a deep-seated low-velocity anomaly beneath the volcanic region, causing a delay for teleseismic shear waves of about 3 s. Using 3773 combined R- and T-component residuals, an isotropic non-linear inversion is calculated. The tomographic images reveal a prominent S-wave velocity reduction in the upper mantle underneath the Eifel region. The anomaly extends down to at least 400 km depth. The velocity contrast to the surrounding mantle is depth-dependent (from −5% at 31-100 km depth to at least −1% at 400 km depth). At about 170-240 km depth the anomaly is nearly absent. The resolution of the data is sufficient to recover the described features, however the anomaly in the lower asthenosphere is underestimated due to smearing and damping. The main anomaly is similar to the P-wave model except the latter lacks the ‘hole’ near 200 km depth, and both are consistent with an upper mantle plume structure. For plausible anhydrous plume material in the uppermost 100 km of the mantle, an excess temperature as great as 200-300 K is estimated from the seismic anomaly. However, 1% partial melt reduces the required temperature anomaly to about 100 K. The temperature anomaly associated with the deeper part of the plume (250 to about 450 km depth) is at least 70 K. However, this estimate is quite uncertain, because the amplitude of the shear-wave anomaly may be larger than the modelled one. Another possibility is water in the upwelling material. The gap at 170-240 km depth could arise from an increase of the shear modulus caused by dehydration processes which would not affect P-wave velocities as much. An interaction of temperature and compositional variations, including melt and possibly water, makes it difficult to differentiate quantitatively between the causes of the deep-seated low-velocity anomaly.     

Isotope variations in a Sierra Nevada snowpack and their relation to meltwater

Isotopic variations in melting snow are poorly understood. We made weekly measurements at the Central Sierra Snow Laboratory, California, of snow temperature, density, water equivalent and liquid water volume to examine how physical changes within the snowpack govern meltwater δ¹⁸O. Snowpack samples were extracted at 0.1 m intervals from ground level to the top of the snowpack profile between December 1991 and April 1992. Approximately 800 mm of precipitation fell during the study period with δ¹⁸O values between −21.35 and −4.25‰. Corresponding snowpack δ¹⁸O ranged from −22.25 to −6.25‰. The coefficient of variation of δ¹⁸O in snowpack levels decreased from −0.37 to −0.07 from winter to spring, indicating isotopic snowpack homogenization. Meltwater δ¹⁸O ranged from −15.30 to −8.05‰, with variations of up to 2.95‰ observed within a single snowmelt episode, highlighting the need for frequent sampling. Early snowmelt originated in the lower snowpack with higher δ¹⁸O through ground heat flux and rainfall. After the snowpack became isothermal, infiltrating snowmelt displaced the higher δ¹⁸O liquid in the lower snowpack through a piston flow process. Fractionation analysis using a two-component mixing model on the isothermal snowpack indicated that δ¹⁸O in the initial and final half of major snowmelt was 1.30‰ lower and 1.45‰ higher, respectively, than the value from simple mixing. Mean snowpack δ¹⁸O on individual profiling days showed a steady increase from −15.15 to −12.05‰ due to removal of lower δ¹⁸O snowmelt and addition of higher δ¹⁸O rainfall. Results suggest that direct sampling of snowmelt and snow cores should be undertaken to quantify tracer input compositions adequately. The snowmelt sequence also suggests that regimes of early lower δ¹⁸O and later higher δ¹⁸O melt may be modeled and used in catchment tracing studies.     

青藏高原土壤水热分布特征及冻融过程在季节转换中的作用

利用GAME-Tibet期间所取得的高分辩率土壤温度和含水量资料，对青藏高原（主要是藏北高原）土壤水热分布特征及冻融过程在季节转换中的作用进行了分析。指出藏北高原4cm学深处土壤在10月份开始冻结，次年4-5月份开始消融，冻结持续时间长达5-7个月。冻结过程有利于土壤维持其水分，因此，在刚刚开始消融时土壤含水量仍然很高。从而为夏季风爆发前土壤通过蒸发向大气提供水分打下了基础。指出土壤冻融过程可能在高原季节转换中起着重要作用。