Modeling erosion of sedimentary coasts in the western Russian Arctic

Morphodynamic modeling is employed in the present work to predict the long-term evolution (over the next 100 years) of typical sedimentary coasts in the western Russian Arctic. The studied objects are the coasts of Varandey (the Barents Sea), Baydaratskaya Bay and Harasavey (the Kara Sea). The model developed takes into account both the short-term processes (storm events) and long-term factors (for example, changes in sea level, inter-annual variations in gross sediment flux, lack or excess of sediment supply). Predicted and observed morphological changes in coastal profiles are shown to agree well for time scales ranging from weeks to decades. It is revealed that under given environmental conditions, the morphological evolution is strongly influenced by storm surges and associated wind-driven circulation. The water level gradient created by a surge generates a seaward flow at the bed. This outflow is shown to be an important destructive mechanism contributing to the erosion and recession of Arctic coasts. The rate of change is found to depend on both the exposure of the coast (relative to the direction of dominant winds) and its height above the sea. The open coast of Varandey is expected to retreat as much as 300–500 m over 100 years, while recession of the less exposed coasts of Baydaratskaya Bay would not exceed about 100 m/century. If long-term sediment losses are insignificant, the rate of erosion decays with time and the morphodynamic system may tend toward equilibrium. It is concluded that the expected relative sea-level rise (up to 1 m over the nearest 100 years) is non-crucial to the future coastal evolution if an erosion activity is already high enough.     

渤海湾及其附近海域沉积物中Cu,Pb,Zn,Cd环境背景值的研究

根据渤海湾及其毗邻河口区10柱岩芯样细颗粒（＜0．063mm）（GF 1983－1985年采集）中重金属含量特点，结合^216Pb年代学编年资料，用未受人类影响沉积层中元素含量，藉统计学方法获得渤海湾岩芯样中Cu，Pb，Zn，Cd的分布类型，并根据各区重金属的含量水平，用t检验法获得了渤海湾Cu，Pb，Zn，Cd的环境背景值。     

Determination of phospholipid fatty acid structures and stable carbon isotope compositions of deep-sea sediments of the Northwest Pacific, ODP site 1179

Sediment samples ranging from 0.05 to 278 m below sea floor (mbsf) at a Northwest Pacific deep-water (5564 mbsl) site (ODP Leg 191, Site 1179) were analyzed for phospholipid fatty acids (PLFAs). Total PLFA concentrations decreased by a factor of three over the first meter of sediment and then decreased at a slower rate to approximately 30 mbsf. The sharp decrease over the first meter corresponds to the depth of nitrate and Mn(IV) reduction as indicated by pore water chemistry. PLFA-based cell numbers at site 1179 had a similar depth profile as that for Acridine orange direct cell counts previously made on ODP site 1149 sediments which have a similar water depth and lithology. The mole percentage of straight chain saturated PLFAs increases with depth, with a large shift between the 0.95 and 3.95 mbsf samples. PLFA stable carbon isotope ratios were determined for sediments from 0.05 to 4.53 mbsf and showed a general trend toward more depleted δ¹³C values with depth. Both of these observations may indicate a shift in the bacterial community with depth across the different redox zones inferred from pore water chemistry data. The PLFA 10me16:0, which has been attributed to the bacterial genera Desulfobacter in many marine sediments, showed the greatest isotopic depletion, decreasing from − 20 to − 35‰ over the first meter of sediment. Pore water chemistry suggested that sulfate reduction was absent or minimal over this same sediment interval. However, 10me16:0 has been shown to be produced by recently discovered anaerobic ammonium oxidizing (anammox) bacteria which are known chemoautotrophs. The increasing depletion in δ¹³C of 10me16:0 with the unusually lower concentration of ammonium and linear decrease of nitrate concentration is consistent with a scenario of anammox bacteria mediating the oxidation of ammonium via nitrite, an intermediate of nitrate reduction.     

On the criteria for the initiation of motion in tidal inlets,deterministic and stochastic approaches

Details are given herein of the refinement and application of a three-dimensional layer integrated numerical model to predict morphological changes in tidal basins. The solution of governing differential equations, which consist of the conservation of mass and momentum for the hydrodynamics, the transport equation for the suspended sediment fluxes and the sediment mass conservation equation for the bed level changes are carried out by the use of Alternating Direction Implicit (ADI) Finite Difference Method (FDM). The model includes different criteria for the initiation of motion namely Shields (1936, Application of Similarity Principles and Turbulence Research to Bed load Movement, Hydrodynamics Laboratory, California Institute of Technology, Pub. No. 167), Kolahdoozan (1999, Numerical Modelling of Geomorphological Processes in Estuarine Waters, PhD Thesis, Department of Civil and Environmental Engineering, University of Bradford, Bradford, UK, 288) and Zanke (2003, On the Influence of Turbulence on the Initiation of Sediment Motion, International Journal of Sediment Research, 18(1), 17–31), to compare different aspects of flow conditions. As the flow is highly turbulent with the random nature of its components, many researchers have tried to express sediment transport processes by using stochastic approaches. In the current study both deterministic and stochastic methods are included in the numerical model to evaluate their accuracy and efficiency. To validate the numerical model results, laboratory measurements are used, with these being obtained from an earlier experimental program undertaken by the authors. Results of a short term bed level changes in a laboratory model harbor are included for the model verification purposes. Comparisons are undertaken using different criteria for the initiation of motion, with the results highlighting that the unsteadiness in the flow parameters included in the numerical model has a major effect on the bed level changes inside the harbor, in compare with the turbulence structure of the flow. The model is then applied to a real case study of the Humber Estuary, located in the UK, with comparisons being undertaken for different criteria for the initiation of motion, using both deterministic and stochastic approaches for the long term bed level predictions.     

Crustal contamination and fluid/rock interaction in the carbonatites of Fuerteventura (Canary Islands, Spain): a C, O, H isotope study

Fuerteventura—the second largest of the Canary Islands consists of Mesozoic sediments, submarine volcanic rocks, dike swarms and plutons of the Basal Complex, and younger subaerial basaltic and trachytic series. Carbonatites are found in two Basal Complex exposures: the Betancuria Massif in the central part of the island and the Esquinzo area in the north. values of the carbonatites increase progressively from south to north of the island. This phenomenon is attributed to different degrees of assimilation of sedimentary carbonate. Homogeneous, typically magmatic values for carbonatites which have preserved primary igneous textures and minerals suggest a well-mixed reservoir where changes in values result from the storage of carbonate magmas at different structural levels. The magma storage allowed assimilation of sediment to varying degrees before final emplacement of carbonatites. Shifts in towards more positive and negative values from presumed primary compositions are observed in the carbonatites. On the basis of the oxygen isotope compositions of calcite, mica and K-feldspar, and the hydrogen isotope compositions of micas, the changes in the values of the carbonatites can be related to fluid/rock interactions.     

River adjustment to changes in sediment load: The effects of tin mining on the Ringarooma River,Tasmania, 1875–1984

The mining of alluvial tin in the Ringarooma basin began in 1875, reached a peak in 1900–20, and had virtually ceased by 1982. During that time 40 million m³ of mining waste were supplied to the main river, quickly replacing the natural bed material and requiring major adjustments to the channel. Based on estimates of sediment supply from more than 50 widely scattered mines and the frequency of flows capable of transporting the introduced load, the river's transport history is reconstructed using a mass-conservation model. Because of the lengthy time period (110 years) and river distance (75 km) involved, the model cannot predict detailed change but it does reproduce the main pattern of sediment movement in which successive phases of aggradation and degradation progress downstream. Peak storage is predicted in that part of the river where braiding and anastomosis are best developed. Aggradation was most rapid in the upper reaches close to major supply points, becoming slower and later with distance downstream. Channel width increased by up to 300 per cent where the valley floor was broad and braiding became relatively common. Bridges had frequently to be replaced. While bed levels were still rising in lower reaches, degradation began in upper ones, notably after 1950, and by 1984 had progressed downriver over 30 km. Rates of incision reached 0·5 m yr^?1, especially in the early 1970s when record high flows occurred. As a result of degradation the bed material became gravelly through either reexposure of the original bed or lag concentration of coarser fractions. Also a narrower unbraided channel has developed. The river is beginning to heal itself and upper reaches now have reasonably stable beds but at least another 50 years will be required for the river to cleanse its channel of mining debris.     

The influence of grain-size analysis methods and sediment mixing on curve shapes and textural parameters: Implications for sediment trend analysis

To this day, deterministic physical models capable of explaining the evolution of grain-size distributions in the course of transport are still lacking. For this reason, various attributes of particle frequency distributions, in particular curve shapes and textural parameters, have for many decades been investigated for potential information about transport behaviour and size-sorting processes of sediments in numerous environments. Such approaches are essentially conceptual and hence rely heavily on the validity of the assumptions on which they are based. A factor which has to date been largely ignored in this context, is the fact that different methods of grain-size analysis (e. g. sieving, laser absorption and diffraction, settling velocity measurements), when applied to the same sample material, produce variable curve shapes, and hence incongruous textural data. This is illustrated by selected examples showing the differences between sieving and settling results, conversion of settling velocities into equivalent settling diameters (psi-phi-transformations), and the influences of particle shape, particle density, and water temperature. It is demonstrated that particle-size distributions are not only method-dependent but also dependent on the adopted post-processing procedure. As a result, only frequency curves generated by the same method and subsequently processed by identical computational procedures can be meaningfully compared. Furthermore, the computation of textural parameters from bi- or multimodal size distributions produces spurious results which are unrelated to the processes leading to the mixing of different size populations frequently observed in nature. In such cases, only the decomposition of such distributions into individual populations and the spatial comparison of such populations makes any sense. Because a physical explanation for the generation of size distributions is lacking, a particular curve shape of a grain-size population has no meaning on its own. Only a systematic comparison of progressively changing curve shapes (and associated textural parameters) of sediments collected on a closely spaced grid can yield data suitable for sediment trend analysis.     

Geomicrobiology of cores from Suruí Mangrove - Guanabara Bay - Brazil

The aim of this work was to quantify the biopolymers associated to esterase enzymes and identify bacterial respiratory activity in four cores collected in Suruí Mangrove, Guanabara Bay - RJ. Biopolymer concentration was 1000 times lower than previously reported in the literature, indicating the need for creating and establishing eutrophication indicative rates and records compatible with tropical coastal systems. The biochemical representative relationships in the cores were equivalent to those from studies on coastal marine environments made in the Northern Hemisphere. The esterase enzymes in the sediment proved efficient in the mineralization of biopolymers, even with preferentially anaerobic metabolic physiology. Despite the lack of incipient geomicrobiological studies, the results highlighted the possible application of microbiology to a better understanding of geological processes.     

雷州半岛高桥红树林沉积物中砷的分布

采用五态连续提取法(SEP)对雷州半岛高桥红树林群落内外不同深度的沉积物砷含量进行测定.结果表明,高桥红树林湿地0~60cm深处沉积物中除Al-结合态砷和Ca-结合态砷含量低,难以检出外,交换态砷、残渣态砷、Fe-结合态砷皆可检出,沉积物砷积累以残渣态砷和 Fe-结合态砷为主,总砷测定含量为7.34±0.39~10.32±0.48 mg/kg,其中以20~40cm深处沉积物总砷测含量最多;不同深度沉积物砷含量中林内与林区外裸滩呈现不同的分布规律,林外裸滩-林缘-林内的表土总砷含量的分布呈波浪式分布,以林缘为最高,总砷达9.97±1.29 mg/kg,林内显著大于林外裸滩(p值<0.05),林内沉积物对砷的吸附强度较林外裸滩高