Prime controls on Archaean–Palaeoproterozoic sedimentation: Change over time

Although the principle of uniformitarianism may be applied to the Precambrian sedimentary record as a whole, certain periods of the Archaean and Palaeoproterozoic witnessed a changing pattern of prime influences controlling the depositional systems. This paper examines the major controls on sedimentation systems and environments during the Archaean and Palaeoproterozoic within the broader perspective of Earth evolution. Earth's earliest sedimentary system (4.4?-3.7 Ga) was presumably comprised of deep oceanic realms and probably influenced primarily by bolide impacts, major tsunamis, localized traction and global contour current patterns, and bathymetry. As continental crust began to form, the impact-dominated, tsunami type sedimentation gave way to wider varieties of sedimentary environments, known from the oldest sedimentary records. During early continental crustal evolution (c. 3.7–2.7 Ga), sedimentation was essentially of greenstone-type. Volcanic and volcaniclastic rocks were the major components of the greenstone belts, associated with thin carbonates, stromatolitic evaporites, BIF, pelites and quartzites and lesser synorogenic turbidites, conglomerates and sandstones. Volcanism and active tectonism (reflecting dynamic depositional settings during island arc and proto-continental nucleus formation) were the predominant factors influencing sedimentation during this phase of Earth evolution. Transgressions and regressions under the combined influence of tectonics and eustasy are reflected in fining- and coarsening-upwards successions from the proto-cratonic settings; low freeboard enabled the transgression to affect large areas of the proto-cratons. As the earliest, relatively stable craton formed, through a combination of plate tectonic and mantle-thermal processes, continents and supercontinents with the potential for supercontinental cycles started to influence sedimentation strongly. Major controls on Neoarchaean–Palaeoproterozoic sedimentation systems (2.7–1.6 Ga) were provided by a combination of superplume events and plate tectonics. Two global-scale ‘superevents’ at c. 2.7 Ga and c. 2.2–1.8 Ga were accompanied by eustatic rise concomitant with peaks in crustal growth rates, and large epeiric seas developed. The operation of first-order controls leading to development of vast chemical sedimentary platforms in these epeiric seas and concomitant palaeo-atmospheric and palaeo-oceanic evolution combined to provide a second-order control on global sedimentary systems in the Neoarchaean–Palaeoproterozoic period. The supercontinental cycle had become well established by the end of the Palaeoproterozoic, with the existence of large cratons across broad spectrums of palaeolatitude enabling erg development. The entire spectrum of sedimentary systems and environments came into existence by c. 1.8 Ga, prime influences on sedimentation and depositional system possibly remaining essentially uniform thereafter.     

Geology of Tok Island,Korea: eruptive and depositional processes of a shoaling to emergent island volcano

Detailed mapping of Tok Island, located in the middle of the East Sea (Sea of Japan), along with lithofacies analysis and K-Ar age determinations reveal that the island is of early to late Pliocene age and comprises eight rock units: Trachyte I, Unit P-I, Unit P-II, Trachyandesite (2.7±0.1 Ma), Unit P-III, Trachyte II (2.7±0.1 Ma), Trachyte III (2.5±0.1 Ma) and dikes in ascending stratigraphic order. Trachyte I is a mixture of coherent trachytic lavas and breccias that are interpreted to be subaqueous lavas and related hyaloclastites. Unit P-I comprises massive and inversely graded basaltic breccias which resulted from subaerial gain flows and subaqueous debris flows. A basalt clast from the unit, derived from below Trachyte I, has an age of 4.6±0.4 Ma. Unit P-II is composed of graded and stratified lapilli tuffs with the characteristics of proximal pyroclastic surge deposits. The Trachyandesite is a massive subaerial lava ponded in a volcano-tectonic depression, probably a summit crater. A pyroclastic sequence containing flattened scoria clasts (Unit P-III) and a small volume subaerial lava (Trachyte II) occur above the Trachyandesite, suggesting resumption of pyroclastic activity and lava effusion. Afterwards, shallow intrusion of magma occurred, producing Trachyte III and trachyte dikes.The eight rock units provide an example of the changing eruptive and depositional processes and resultant succession of lithofacies as a seamount builds up above sea level to form an island volcano: Trachyte I represents a wholly subaqueous and effusive stage; Units P-I and P-II represent Surtseyan and Taalian eruptive phases during an explosive transitional (subaqueous to emergent) stage; and the other rock units represent later subaerial effusive and explosive stages. Reconstruction of volcano morphology suggests that the island is a remnant of the south-western crater rim of a volcano the vent of which lies several hundred meters to the north-east.     

The historically adjusted range and the historically rescaled adjusted range

It was remarked by Hurst in 1951 that the adjusted range gives the size of the smallest reservoir capable of providing a constant discharge equal to the mean inflow. Since that time this range and its rescaled modification, the Hurst range, have been widely discussed, not however primarily with a view to applying them to reservoir design problems, but rather on account of their possible relevance to the simulation of geophysical time series.Acknowledging the well-known conceptual weaknesses of adjusted ranges and the theoretical difficulties that inhibit their direct utilisation in the design and operation of real reservoirs, the authors argue that the interest displayed on ranges during the past few decades justifies the effort of eliminating one in particular of these weakness, namely their non-implementability as operating policies, a consequence of the fact that they can only be retrospectively evaluated. The paper proposes modifications in which the unknowable mean and standard deviation of future samples are replaced by the known mean and sample standard deviation of historical data, leading to the historically adjusted range and the historically rescaled and adjusted range. The latter is produced as an implementable approximation to Hurst's (1951) solution to the optimal reservoir problem.The expected values of the new ranges are evaluated and numerically tabulated.     

The effect of varied dam release mechanisms and storage volume on downstream river thermal regimes

Temperature plays an essential role in the ecology and biology of aquatic ecosystems. The use of dams to store and subsequently re-regulate river flows can have a negative impact on the natural thermal regime of rivers, causing thermal pollution of downstream river ecosystems. Autonomous thermal loggers were used to measure temperature changes downstream of a large dam on the Macquarie River, in Australia’s Murray-Darling Basin to quantify the effect of release mechanisms and dam storage volume on the downstream thermal regime. The magnitude of thermal pollution in the downstream river was affected by different release mechanisms, including bottom-level outlet releases, a thermal curtain (which draws water from above the hypolimnion), and spill-way release. Dam storage volume was linked to the magnitude of thermal pollution downstream; high storage volumes were related to severe thermal suppressions, with an approximate 10 °C difference occurring when water originated from high and low storage volumes. Downstream temperatures were 8 ̶ 10 °C higher when surface releases were used via a thermal curtain and the spillway to mitigate cold water pollution that frequently occurs in the river. Demonstrating the effectiveness of engineering and operational strategies used to mitigate cold water pollution highlight their potential contribution to fish conservation, threatened species recovery and environmental remediation of aquatic ecosystems.     

The Ganges and Brahmaputra rivers in Bangladesh: basin denudation and sedimentation

Every year the Ganges and Brahmaputra rivers in Bangladesh transport 316 and 721 million tonnes of sediment, respectively. These high loads of suspended sediment reflect the very high rate of denudation in their drainage basins. The average mechanical denudation rate for the Ganges and Brahmaputra basins together is 365 mm 10³ yr⁻¹. However, the rate is higher in the Brahmaputra Basin than that in the Ganges Basin. Several factors, including mean trunk channel gradient, relief ratio, runoff, basin lithology and recurring earthquakes are responsible for these high denudation rates. Of the total suspended sediment load (i.e. 1037 million tonnes) transported by these rivers, only 525 million tonnes (c. 51% of the total load) are delivered to the coastal area of Bangladesh and the remaining 512 million tonnes are deposited within the lower basin, offsetting the subsidence. Of the deposited load, about 289 million tonnes (about 28% of the total load) are deposited on the floodplains of these rivers. The remaining 223 million tonnes (about 21% of the total load) are deposited within the river channels, resulting in aggradation of the channel bed at an average rate of about 3·9 cm yr⁻¹. Although the Brahmaputra transports a higher sediment load than the Ganges, the channel bed aggradation rate is much higher for the Ganges. This study also documents a wide range of interannual, seasonal and daily variation in suspended sediment transport and water discharge. Interannual variation in sediment deposition within the basin is also suggested. Copyright © 1999 John Wiley & Sons, Ltd.     

THE RIVER CHANNEL ADJUSTMENT AS INFLUENCED BY THE FLOODPLAIN GEOECOSYSTEM： AN EXAMPLE FROM THE HONGSHAN RESERVOIR

ＴＨＥＲＩＶＥＲＣＨＡＮＮＥＬＡＤＪＵＳＴＭＥＮＴＡＳＩＮＦＬＵＥＮＣＥＤＢＹＴＨＥＦＬＯＯＤＰＬＡＩＮＧＥＯＥＣＯＳＹＳＴＥＭ：ＡＮＥＸＡＭＰＬＥＦＲＯＭＴＨＥＨＯＮＧＳＨＡＮＲＥＳＥＲＶＯＩＲ￥ＸＵＪｉｏｎｇｘｉｎ；ＳＨＩＣｈａｎｇｘｉｎｇ（Ｐｒ...     

Experimental study on the effect of bottomless structure in front of a bottom outlet on a sediment flushing cone

One of the main problems in reservoirs is sedimentation which reduces the operating life of dams if a proper plan and analysis method are not in place.The techniques to manage sediment in reservoirs include several sustainable management techniques that route sediment through or around the reservoir.One of the main economical methods in arid and semi-arid regions is pressurized flushing using moderate drawdown of the water level of the reservoir to evacuate sediment deposited behind dams.In the current study,the effect of a new structure called a dendritic bottomless extended(DBE)outlet structure at three angles of 30°,45°,and 60°
on pressurized flushing efficiency was investigated.Consequently,45 experiments were designed for three discharge rates (Qo),three sediment levels(Hs),four types of structure,and a no-structure condition(reference test).The results indicated that the DBE structure with a 30°angle between the branches,a sedimentary dimensionless index of Hs/Do=4.59,and a flow dimensionless index of Qo=/√gD05=1:43(where g is the acceleration of gravity and Do is the diameter of the bottom outlet)lead to 10-fold increase in the sediment flushing cone dimensions and sediment removal efficiency compared to the results of the reference test.Finally,according to a statistical analysis of the results,a dimensionless equation for calculating the sediment flushing cone dimensions was developed for the tested sediment characteristics.     

基于声学全波形反演的油气藏地震成像方法

岩性油气藏在我国天然气勘探开发中占有非常重要的位置,其分布区域的成像是合理布设井位,提高钻井成功率的关键之一.本文首先基于地下介质的声学近似和波场回传理论,利用频率域单程声波方程延拓计算地震波场,进行全波形反演,获得地层密度和体积模量的定量成像,并依据油气藏物性特征和流体饱和多孔介质岩石物理模型,简要讨论了孔隙度和饱和度与密度及体积模量的关系,明确了地震油气藏成像新概念.在此基础上,定义了基于流体体积模量和孔隙度的成像函数,进行油气藏成像.理论模型计算表明该方法是可行的.通过对西部地区某气田二维地震数据处理,实现了致密砂岩气藏成像,钻井结果证实了气藏区域成像位置的准确性和方法的有效性.     

SPECIFIC DEGRADATION OF WATERSHEDS

An extensive database of reservoir sedimentation surveys throughout continental United States is compiled and analyzed to determine specific degradation SD relationships as function of mean annual rainfall R, drainage area A, and watershed slope S. The database contains 1463 field measurements and specific degradation relationships are defined as function of A, R and S. Weak trends and significant variability in the data are noticeable. Specific degradation measurements are log normally distributed with respect to R, A, and S and 95% confidence intervals are determined accordingly. The accuracy of the predictions does not significantly increase as more independent variables are added to the regression analyses.     

The added value of joint PP–PS inversion for reservoir characterization: A case study using Jubarte PRM seismic data (offshore Brazil)

The added value of the joint pre-stack inversion of PP (incident P-wave and reflected P-wave) and PS (incident P-wave and reflected S-wave) seismic data for the time-lapse application is shown. We focus on the application of this technique to the time-lapse (four-dimensional) multicomponent Jubarte field permanent reservoir monitoring seismic data. The joint inversion results are less sensitive to noise in the input data and show a better match with the rock physics models calibrated for the field. Further, joint inversion improves S-impedance estimates and provides a more robust quantitative interpretation, allowing enhanced differentiation between pore pressure and fluid saturation changes, which will be extremely useful for reservoir management. Small changes in reservoir properties are expected in the short time between the time-lapse seismic acquisitions used in the Jubarte project (only 1 year apart). The attempt to recover subtle fourth-dimensional effects via elastic inversion is recurrent in reservoir characterization projects, either due to the small sensitivity of the reservoirs to fluid and pressure changes or the short interval between the acquisitions. Therefore, looking for methodologies that minimize the uncertainty of fourth-dimensional inversion outputs is of fundamental importance. Here, we also show the differences between PP only and joint PP–PS inversion workflows and parameterizations that can be applied in other projects. We show the impact of using multicomponent data as input for elastic seismic inversions in the analysis of the time-lapse differences of the elastic properties. The larger investment in the acquisition and processing of multicomponent seismic data is shown to be justified by the improved results from the fourth-dimensional joint inversion.