Casualties in dry bulk shipping (1963–1996)

In recent years, bulk carriers have been identified with high risks of catastrophic structural failure and foundering, and with heavy loss of human life. This study, based upon Lloyd's of London casualty records, identified four risk factors that had significant, independent effect upon the likelihood of a bulk carrier foundering. The risk of foundering increased with the age of the ship, and was related to the ship's flag of registration. Most importantly, however, increased risks were found for heavy cargoes of iron ore and scrap steel or iron, and for trading routes to the Far East and from Europe to North America. Additional safety measures, in particular regarding ship design and high-risk trades, may well be necessary to reduce the high casualty rates.     

Review of resource analysis and related studies: Working group,Mathematical Geology,freie Universität Berlin

The working group Mathematical Geology of the Freie Universität Berlin was formed in 1971. We review quantitative methods used by the working group since 1983 to treat mineral exploration problems. The methods applied vary from elementary statistical analysis of multivariate exploration data to optimal strategies for selecting favorable targets, and from multiobjective decision-making for additional drill hole locations to expert systems in exploration.The methods applied are directly related to the level of information at each stage of the exploration process. Special emphasis was placed on the relationship between and evaluation of subjective and objective data. Case studies illustrating the various methods are presented for different kinds of mineral deposits and exploration environments.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。     

Overbreak and underbreak in underground openings Part 2: causes and implications

Summary The newly developed light sectioning method has been used to investigate some of the causes and costs of overbreak and underbreak. Investigations at the Aquamilpa Hydroelectric Project in Mexico have shown decreased overbreak and increased underbreak as a result of increased rock quality and decreased explosive energy. A new measure of explosive energy, the perimeter powder factor (PPF), has been defined and shown to be useful in the context of tunnel-wall rock damage. Tentative results indicate that explosive energy (PPF) may be a more important factor in producing underbreak, whereas rock quality may be a greater factor in producing overbreak. A site-specific equation is given for predicting overbreak or underbreak as a function of rock quality and explosive energy, with an evaluation of the cost of underbreak and overbreak.     

Oil and gas resource assessment: The linkage between geological analysis and discovery process model results

Two widely-used techniques to estimate the volume of remaining oil and gas resources are discovery process modeling and geologic assessment. Both were used in a recent national assessment of oil and gas resources of the United States. Parallel estimates were obtained for 27 provinces. Geological-based estimates can typically see into areas not available to discovery process models (that is areas with little or no exploration history) and thus, on average, yield higher estimates. However, a linear relation does exist between the mean estimates obtained from these two methods. In addition, other variables were found in a multiple regression model that explained much of the difference. Thus, it is possible to perform discovery process modeling and adjust the estimates to yield results that might be expected from geological-based assessments.     

Information structure analysis for quantitative assessment of mineral resources and the discovery of a silver deposit

We propose an information-structure-analysis (ISA) method to quantify the correlations between quantitative and qualitative variables as well as within each type of variable. This method is applied to the evaluation of mineral resources in the western Zheijiang Province of China. The district contains a number of silver-bearing Fe–Cu–Pb–Zn mineral deposits near igneous complexes and FeCuPbZn zones away from the complexes. Silver anomalies occur not only in the known Fe–Cu–Zn–Pb deposits, but also in the country rock, suggesting the possible existence of silver deposits far from the igneous complexes.The tonnage distribution of silver is modeled by Monte Carlo simulation. This simulation is conducted on the basis of the correlations between silver (Ag) and lead (Pb), since no known data on silver is available. The known tonnage distribution of lead in 11 control cells was used to approximate the tonnage distribution of silver in the Monte Carlo simulation. With ISA and Monte Carlo methods, the total amount of potential polymetallic resources in 49 cells in the western Zhejiang Provice is predicted. Significantly, a deposit with about 24 tonnes of silver has been found within our exploration target area.     

The deposit size frequency method for estimating undiscovered uranium deposits

The deposit size frequency (DSF) method has been developed as a generalization of the method that was used in the National Uranium Resource Evaluation (NURE) program to estimate the uranium endowment of the United States. The DSF method overcomes difficulties encountered during the NURE program when geologists were asked to provide subjective estimates of (1) the endowed fraction of an area judged favorable (factorF) for the occurrence of undiscovered uranium deposits and (2) the tons of endowed rock per unit area (factorT) within the endowed fraction of the favorable area. Because the magnitudes of factorsF andT were unfamiliar to nearly all of the geologists, most geologists responded by estimating the number of undiscovered deposits likely to occur within the favorable area and the average size of these deposits. The DSF method combines factorsF andT into a single factor (F·T) that represents the tons of endowed rock per unit area of the undiscovered deposits within the favorable area. FactorF·T, provided by the geologist, is the estimated number of undiscovered deposits per unit area in each of a number of specified deposit-size classes. The number of deposit-size classes and the size interval of each class are based on the data collected from the deposits in known (control) areas. The DSF method affords greater latitude in making subjective estimates than the NURE method and emphasizes more of the everyday experience of exploration geologists. Using the DSF method, new assessments have been made for the young, organic-rich surficial uranium deposits in Washington and idaho and for the solution-collapse breccia pipe uranium deposits in the Grand Canyon region in Arizona and adjacent Utah.     

新疆第三次荒漠化监测中的问题及其建议

回顾了新疆3次在荒漠化监测中所进行的荒漠化监测与评价指标体系的建立，也是新疆开展荒漠化监测的基础；介绍了以遥感与地理信息为主要技术的荒漠化监测评价的方法；阐述了新疆第三次荒漠化监测中存在的问题。指出目前新疆荒漠化评价存在的主要问题是评价指标的不确定性、评价指标体系的难操作性和遥感数据源选用的随机性，进而对上述问题的解决途径进行了讨论。     

Spatial analysis of elements in soils from Chengdu City

Three kinds of spatial analysis methods （geostatistics, concentration-area fractal model and the multifractal analysis called the moment method） were used for almost 50 elements, including heavy metals, disperse elements, rare elements and even others, in 6586 top soil （0-20 cm） samples and 1833 deep soil （150-200 cm） samples from Chengdu metropolitan area of 12400 km^2, southwestern China. The ranges of spatial correlation revealed by variograms are quite different for different kinds of elements in the top and deep soils. The most interest is the fact that the multifractal spectra of environmentally important elements such as Pb, Cr, Cd and Ni in top soils in the metropolitan area show systematic change from those in the deep soils, revealing a strong anthropogenic addition, while Hg, Zn, As, Cu and all common elements show no such kind of addition. In terms of multifractal properties based on the multifractal spectrum curves, those disperse and rare elements show great deviation from other major and trace elements, which is also of great interest.