Palaeozoic Intraplate Crustal Anatexis in the Mount Painter Province, South Australia: Timing, Thermal Budgets and the Role of Crustal Heat Production

The effect of radiogenic heat production within the crust onthermal processes such as crustal anatexis is generally disregardedas bulk geochemical models suggest that crustal heat generationrates are too low to effect significant heating. However, theMount Painter Province in northern South Australia is characterizedby a total crustal contribution to surface heat flow of morethan twice the global average. The province is composed dominantlyof Proterozoic granites and granite gneisses with an area averageheat production of 16·1 µW/m³; individual lithologieshave heat production >60 µW/m³. These Proterozoic rocksare intruded by the British Empire Granite, a younger intrusivewhose origin has remained enigmatic. Isotope geochemistry suggestscrustal sources for the melt and it has a crystallization ageof 440–450 Ma, which places the setting >750 km inboardof the nearest active plate boundary zone at this time. Phaseequilibria calculations suggest that temperatures of at least720–750°C are required to produce the granite butthe intensity of crustal thickening during Palaeozoic deformation(12%) cannot account for these conditions. Here we describea model for the generation of the British Empire Granite inwhich the primary thermal perturbation for mid-crustal anatexiswas provided by the burial of the high heat-producing MountPainter basement rocks beneath the known thickness of Neoproterozoiccover sediments. The high heat-producing rocks at Mount Painterimply that the natural range and variability of crustal heatproduction is much greater than previously believed, with importantconsequences for our understanding of temperature-dependentcrustal processes including the exploitation of geothermal energyresources. KEY WORDS: geothermal energy; low-pressure anatexis; thermal conductivity; thermal regime     

高速铁路浅埋偏压隧道安全进洞方案研究

针对傍山浅埋偏压、局部出露地表隧道工程合理施工方案的选取问题,结合现场工程地质及施工环境条件,提出"先在出露地表侧预设钢格栅混凝土护拱,随后反压回填土石,采用暗挖法进洞"的护拱暗挖技术方案,并与放坡明挖、支挡明挖方案进行对比分析.研究结果表明,明挖施工方案虽技术成熟,但用于此类隧道面临着靠山侧高陡边坡开挖及防护工程量大...     

地铁盾构隧道各阶段平面控制测量的限差分配

结合＂城市轨道交通工程测量规范＂中的相关技术要求,从理论上分析盾构隧道横向贯通误差的主要来源及各阶段平面控制测量误差限值的合理分配,并针对盾构法施工地铁隧道的特点,探讨长大盾构区间地面平面控制点的布设原则及限值的优化配赋。     

基于World Wind的鄱阳湖水位动态变化仿真系统研究

World Wind是由美国宇航局(NASA)开发的三维地理信息系统,也是一款可提供丰富数据的数字地球平台,如何将多源数据实现紧密型二三维耦合是基于World Wind开发专业系统需要解决的重要问题.在.NET开发环境下,以World Wind为仿真内核,开发了水位仿真系统,研究了二三维数据耦合技术,实现了环鄱阳湖生态经济开发区的湖区与航道淹没分析和三维漫游.结果表明,仿真系统流畅地实现了任意点地形高程、水位、水深和航道级别等信息的实时查询,仿真了不同控制水位条件下的鄱阳湖区淹没范围,仿真结果能够服务于鄱阳湖水利枢纽的水位调控决策;该仿真系统在湖泊干旱特征水位等确定中也具有重要的应用价值.     

Temporal characteristics and fog water collection during summer in Tenerife (Canary Islands, Spain)

The study of fog dynamics in the island of Tenerife began in 1993 at six sites. The analysis of the relationship between fog and several meteorological parameters was conducted at the site located at Anaga. Anaga is located at the summit of a mountain range, at an altitude of 842 m and 3.5 km away from the north-western coastline of the island. The study uses hourly data of the three summer months (June, July and August) that were collected over a period of nine years — from 1996 to 2005. The mean summer (June–August) rainfall was found to be 21.2 mm whilst the total volume of fog water collected was 879.9 l m^− 2; the daily average fog water collection was 9.5 l m^− 2 day^− 1, and the hourly average about 0.4 l m^− 2 h^− 1. Although these amounts were recorded with wind speeds of between 8 and 12 m s^− 1, the correlation between water collected and wind speed is not statistically significant. In spite of this, the volume of fog water collected and wind speed showed a very distinct daily behavioural pattern, their frequency and speed reaching their minimum at 12 a.m. and their maximum from 7 p.m. to 8 a.m. GMT. The importance of this research is that it shows that the fog in the Canary Islands occurs more frequently and makes a more significant contribution to the growth of vegetation in the summer (the dry season) than in the winter, when fog accompanies rainfall.     

条件不稳定湿大气中三维理想地形上空对流的动力学特征

条件不稳定湿大气情况下,气流经过三维地形可以形成不同性质的对流系统以及不同特征的地形流结构,其对流系统、地形流的性质主要取决于地形上空的对流触发、对流-地形流-重力波三者之间的相互作用,同样这些过程对于地形降水的性质、分布起重要的作用.根据不同湿Fr数(Froude number),湿条件不稳定大气经过三维小尺度山地上空时其对流和地形流动存在4种不同的流域(flow regirnes):(1)下游传播对流模态;(2)上游传播和下游传播共存对流模态;(3)山峰附近准静止和下游传播共存对流模态;(4)下坡稳定和下游传播对流共存模态.地形上空对流系统主要可以通过两种不同机制形成:(1)地形直接的抬升或减速作用;(2)在地形流形成后,由于地形流本身特性(如上游分离、背风涡旋和下坡重力波破碎)触发.在较大的Fr数情况下,地形上空对流生成后反过来可以破坏上、下游的地形流结构,但对背风坡的重力波破碎影响较小.不同初始对流有效位能(CAPE)不仅可以影响对流系统的传播、发展,而且可以影响整体地形流性质.较低的初始CAPE有利于地形流的形成,此时对流对地形流结构特征的影响相对较小,其流场性质与低Fr数流域性质相似.     

风能模拟系统WEST在中国风能数值模拟中的应用

利用加拿大风能资源数值模拟系统(WEST)进行中国风能资源的模拟,得到了水平分辨率5km、低空垂直分辨率10 m的中国风能分布图谱。将模拟结果与气象台站观测资料进行了对比分析,结果表明,WEST在中国中东部海拔较低地区的模拟能力较好,平均相对误差<20%,但对于中国西部高原的模拟结果不理想,相对误差达到了60%以上,说明WEST系统对中国西部高原的模拟能力还需提高。应从其大尺度气候背景场分类和中尺度模型大气边界层物理过程参数化方面进行本地化改进,使之能更好地应用于中国风能资源评估工作。     

用双多普勒天气雷达资料研究暴雨三维风场结构

使用双多普勒天气雷达三维风场反演技术对2005年6月11-12日梅州和汕头多普勒天气雷达探测到的华南暴雨资料进行了三维风场反演,对暴雨系统的中尺度三维动力结构进行了详细分析.结果表明:此次暴雨主要是由中低层的中β尺度辐合线、中β尺度切变线和嵌于其中的中γ尺度涡旋共同作用引发的.低层辐合、高层辐散的动力结构,有利于暴雨系统的触发、维持和发展.最后,综合分析结果给出了此次暴雨的三维动力结构模型.     

Validation of OML,AERMOD/PRIME and MISKAM Using the Thompson Wind-Tunnel Dataset for Simple Stack-Building Configurations

A comprehensive dataset on dispersion behind rectangular buildings has been used to analyse the performance of two dispersion models in respect to their handling of building effects: the Danish OML model and the US AERMOD model with the PRIME building algorithm; additionally, the German MISKAM model has been assessed. OML and AERMOD are regulatory plume models with limited requirements in terms of input and computing resources, whereas MISKAM is a computational fluid dynamical model, and as such much more demanding. For most scenarios considered, the degree of misprediction in respect to the maximum concentrations is less than a factor of two for OML and AERMOD. However, in respect to the concentration at a specific location, especially in the near field, both models often result in larger mispredictions. MISKAM provides more accurate predictions.     

2008年7月14—15日川西暴雨过程的温度层结变化分析

2008年7月14-15日,四川盆地西部"5.12"汶川大地震重灾区在非典型热力条件下出现了一次暴雨天气过程.本文利用常规观测资料和NCEP 1°×1°再分析资料,对其天气形势及温度层结变化特征进行了详细分析.结果表明:(1)暴雨发生在副热带高压不断西伸的环流背景下,低层偏南气流及其风速脉动对暴雨产生具有重要作用.(2)暴雨开始于850hPa θse下降及大气层结为弱稳定的非典型热力条件下,但700 hPa θse突增使得700-500 hPa对流性不稳定层建立,从而利于对流运动发展;暴雨过程后期,因850 hPa和700 hPa θse急剧下降和大气层结稳定度增大,对流上升受到明显抑制.(3)低层θse锋区和水汽辐合对强降水具有指示意义,暴雨落区位于850 hPa和700 hPa θse锋区前沿,降水中心位于水汽汇合中心附近.