探地雷达(GPR)在海南岛东北部海岸带调查中的应用 *

对海南岛东北部海岸带调查采用了探地雷达(GPR)研究海岸带沙体的结构、展布和沉积序列,取得了很好的效果。文章通过和有限的露头资料对比以及对反射波形态、结构的研究,确定了海滩脊、海岸沙丘的反射特征以及潜水面的位置。雷达图像显示五龙港古海滩脊由亚水平、不连续、高振幅和透镜状反射波组成;木兰头海岸沙丘已受到人类活动的扰动,短的、陡倾斜反射可能代表未受扰动的海岸风成沙的前积层。研究表明探地雷达是一种可靠、快速和经济的地球物理方法,在砂砾质海岸可产生高质量、高分辨率和连续的反射剖面,值得加以推广。     

2001年春季中国北方沙尘暴的环流动力结构分析

通过对2001年春季中国北方5次沙尘暴的高度场，涡度场，散度场和风场的分析，研究了沙尘暴强盛期的环流动力结构。结果表明，在5次沙尘暴强盛期有相似的环流动力结构特征。在沙尘暴强盛期的高度场上，蒙古国有深厚的低值系统，乌拉尔高压发展，其间的强气压梯度是沙尘暴的动力源；低值系统有正涡度中心支持，外围是负涡度区，其间有强涡度梯度带；低值中心伴随有低层辐合高层辐散的垂直结构，易于发生近地面大风和上升气流，有利于地面起沙上扬，形成沙尘暴，大风区与强涡度梯度带一致，强风带切变形成的涡度输送有利于加强低值系统，进而增强风场。     

风沙起电的风洞实验研究

利用大型风沙物理风洞实验装置 ,模拟铺沙地面在不同风速条件下对不同粒径的沙样和混合沙的起电电场、电位和荷质比作实验测量。结果表明 :存在风沙起电效应。风洞内电场多为负极性 ,最大电场达到 - 2 9kV·m- 1 ,导线电位可达 12 0mV。沙粒越细 ,起电越强 ,且随风速增加而增大     

Ekman动量近似下中间边界层模式中的风场结构

发展了一个准三维的、中等复杂的边界层动力学模式，该模式包含了EKman动量近似下的惯性加速度和Blackadar的非线性湍流粘性系数，它进一步改进了Tan和Wu(1993）提出的边界层理论模型。该模型在数值计算复杂性上与经典Ekman模式相类似，但由于包含了Ekman动量近似下的惯性项，使得该模式比传统Ekman模式更近于实际过程。中详细地比较了该模式与其他简化边界层模式在动力学上的差异，结果表明：在经典的Ekman模式中，由于忽略了流动的惯性项作用，导致在气旋性切变气流（反气旋性切变气流）中风速和边界层顶部的垂直速度的高估（低估），而在半地转边界层模式中，由于高估了流动惯性项的作用，结果与经典Ekman模式相反。同样，该模式可以应用于斜压边界层，对于Ekman动量下的斜压边界层风场同时具有经典斜压边界层和Ekman动量近似边界层的特征。     

Near Wall Flow over Urban-like Roughness

In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s^-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry.The results haveconfirmed the strong three-dimensionalityof the turbulent flow inthe roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can,together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves.The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the `roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.     

Near-Wall Flow Development After A Step Change In Surface Roughness

An experimental study of the initial flow field downstream of a step change in surface roughness is presented. The roughness length of the downstream surface was approximately tenfold that of the upstream roughness and, unlike all previous studies, attention was concentrated on the roughness sublayer region beneath the inertial (log-law) region. The experiments were conducted at a boundary layer Reynolds number of about 6 × 10⁴ (based on layer thickness andfree-stream velocity) and around a longitudinal location where the (downstream) roughness length, z_o2, was about 1% of the boundary-layer thickness atthe roughness change point.The thickness of the roughness sublayer was found for the two roughness. It was observed that the vertical profiles of mean velocity and turbulence characteristics started to show similarity after about 160z₀₂ downstream of the roughness change. The presence of a shear stress overshoot is shown to depend strongly on the precise location (with respect to the roughness elements) at which the measurements are made and the thickness of the equilibrium layer is shown to be very sensitive to the way it is defined. It is demonstrated that the growing equilibrium layer has first to encompass the roughness sublayer before any thickness of inertial sublayer can be developed. It follows that, in somepractical cases, like flows across some urban environments, the latter(log-law) region may never exist at all.     

Laboratory Studies Of Wind Stress Over Surface Waves

Simultaneous laboratory observations of wind speed, wind stress, and surfacewind-wave spectra are made under a variety of wind forcing patterns using cleanwater as well as water containing an artificial surfactant. Under typical experimentalconditions, more than half of the total stress is supported by the wave-induced stressrather than by the surface viscous stress. When the surfactant reduces the shortwind-wave spectra, the wind stress also decreases by as much as 20–30% at agiven wind speed. When the wind forcing is modulated in time, the wind stresstends to be higher under decreasing wind than under increasing wind at a givenwind speed, mainly because the response of short wind-wave spectra to varyingwind forcing is delayed in time. These examples clearly demonstrate that therelationship between the wind speed and the wind stress can be significantlymodified if the surface wave field is not in equilibrium with the wind forcing.Next, we examine whether the wind stress is estimated accurately if the wave-inducedstress by all surface wave components is explicitly evaluated by linear superpositionand is added to the surface viscous stress. It is assumed that the surface viscous stressis uniquely related to the wind speed, and that the wind input rate is determined by thelocal, reduced turbulent stress rather than the total stress. Our wind stress estimatesincluding the wave contributions agree well with observed wind stress values, evenif the surface wave field is away from its equilibrium with the wind in the presenceof surface films and/or under time-transient wind forcing. These observations stronglysuggest that the wind stress is accurately evaluated as a sum of the wave-induced stressand the surface viscous stress. At very high winds, our stress estimates tend to be lowerthan the observations. We suspect that this is because of the enhancement of wind stressover very steep (or breaking) short wind-waves.     

隧道塌方的尖点灾变模型及应用

针对隧道塌方失稳问题，运用灾变理论建立隧道塌方失稳的尖点灾变模型。基于平衡曲面方程，可求得隧道围岩体内承载区介质刚度与对应的松驰区弱化介质本构曲线拐点处理刚度之比值K，并给出了塌方与否的判据，当K≤1时，隧道将发生塌方失稳；当K＞1时，隧道将不会发生塌方失稳。根据此模型，笔者解释了隧道中几种常见的灾变破坏机理，并提出了相应的治理方案。     

深埋长隧道有害气体发生的地质条件初探

有害气体的深埋长隧道的主要地质灾害现象之一。本文在现场调查及查阅国内外文献资料基础上，探讨了有害气体发生的地质条件，为有害气体地质灾害的预测提供了依据。