北祁连西段祁青构造混杂岩中的单颗粒锆石U-Pb年龄及其地质意义

在北祁连西段三岔口等6幅1∶5万区域地质调查中,对祁青构造混杂岩进行了调查研究,通过LA-ICPMS法单颗粒锆石U-Pb同位素测年,获得206Pb/238U表面加权平均年龄494±15Ma,相当于中寒武世,故将该混杂岩解体,部分归为中寒武世黑刺沟组。     

Structural analysis of the Lombard thrust sheet and adjacent areas in the Helena salient,southwest Montana,USA

The Helena salient is a prominent craton–convex curve in the Cordillera thrust belt of Montana, USA. The Lombard thrust sheet is the primary sheet in the salient. Structural analysis of fold trends, cleavage attitudes, and movement on minor faults is used to better understand both the geometry of the Lombard thrust and the kinematic development of the salient.Early W–E to WNW–ENE shortening directions in the Lombard sheet are indicated by fold trends in the center of the thrust sheet. The same narrow range of shortening directions is inferred from kinematic analysis of movement on minor faults and the orientations of unrotated cleavage planes along the southern lateral ramp boundary of the salient. As the salient developed, the amount and direction of shortening were locally modified as listric detachment faults rotated some tight folds to the NW, and as right-lateral simple shear, caused by lock-up and folding of the Jefferson Canyon fault above the lateral ramp, rotated other folds northeastward. Where the lateral ramp and frontal-oblique ramp intersect, folds were rotated back to the NW. Our interpretation of dominant W–E to WNW–ESE shortening in the Lombard sheet, later altered by local rotations, supports a model of salient formation by primary parallel transport modified by interactions with a lateral ramp.     

Prospect of Lithium Resources Supply and Demand

正1 Introduction The conflict between resources and the environment has been increasingly outstanding as the population,economy and society around the globe have developed rapidly since the 21st century.An important challenge that the human     

Petrology and geothermobarometry of granulite facies metapelites from the Hisøy-Torungen area, south Norway: new data on the Sveconorvegian P–T–t path of the Bamble sector

ABSTRACT The high-grade rocks (metapelite, quartzite, metagabbro) of the Hisøy-Torungen area represent the south-westernmost exposures of granulites in the Proterozoic Bamble sector, south Norway. The area is isoclinally folded and a metamorphic P–T–t path through four successive stages (M1-M4) is recognized. Petrological evidence for a prograde metamorphic event (M1) is obtained from relict staurolite + chlorite + albite, staurolite + hercynite + ilmenite, cordierite + sillimanite, fine-grained felsic material + quartz and hercynite + biotite ± sillimanite within metapelitic garnet. The phase relations are consistent with a pressure of 3.6 ± 0.5 kbar and temperatures up to 750–850°C. M1 is connected to the thermal effect of the gabbroic intrusions prior to the main (M2) Sveconorwegian granulite facies metamorphism. The main M2 granulite facies mineral assemblages (quartz+ plagioclase + K-feldspar + garnet + biotite ± sillimanite) are best preserved in the several-metre-wide Al-rich metapelites, which represent conditions of 5.9–9.1 kbar and 790–884°C. These P–T conditions are consistent with a temperature increase of 80–100°C relative to the adjacent amphibolite facies terranes. No accompanying pressure variations are recorded. Up to 1-mm-wide fine-grained felsic veinlets appear in several units and represent remnants of a former melt formed by the reaction: Bt + Sil + Qtz→Grt + lq. This dehydration reaction, together with the absence of large-scale migmatites in the area, suggests a very reduced water activity in the rocks and XH₂O = 0.25 in the C–O–H fluid system was calculated for a metapelitic unit. A low but variable water activity can best explain the presence or absence of fine-grained felsic material representing a former melt in the different granulitic metapelites. The strongly peraluminous composition of the felsic veinlets is due to the reaction: Grt +former melt ± Sil→Crd + Bt ± Qtz + H₂O, which has given poorly crystalline cordierite aggregates intergrown with well-crystalline biotite. The cordierite- and biotite-producing reaction constrains a steep first-stage retrograde (relative to M2) uplift path. Decimetre- to metre-wide, strongly banded metapelites (quartz + plagioclase + biotite + garnet ± sillimanite) inter-layered with quartzites are retrograded to (M3) amphibolite facies assemblages. A P–T estimate of 1.7–5.6 kbar, 516–581°C is obtained from geothermobarometry based on rim-rim analyses of garnet–biotite–plagioclase–sillimanite–quartz assemblages, and can be related to the isoclinal folding of the rocks. M4 greenschist facies conditions are most extensively developed in millimetre-wide chlorite-rich, calcite-bearing veins cutting the foliation.     

区域合作背景下服务业发展的收敛性研究——以大珠三角金融业为例

文章基于经济增长收敛理论,从区域合作视角,展开服务业发展收敛性研究.包括阐释服务业发展收敛的内涵、与经济增长收敛的关联、服务业发展的收敛机制,以及分析服务业发展收敛的模型与指标选择,并最终运用所构建的方法,对CEPA实施后大珠江三角洲的金融业收敛性进行了实证检验.结果显示,2004-2008年该区域金融业发展呈发散趋势.这一结果与近年来以其他方法与指标检验金融收敛性得出的结论基本一致,证实了基于经济增长收敛理论及分析模型的服务业发展收敛研究思路与分析模型具有可信性与可行性,亦从一个侧面对大珠三角金融合作的成效作出了评判.     

Modelling the Gross Primary Productivity of West Africa with the Regional Biomass Model RBM+, using optimized 250 m MODIS FPAR and fractional vegetation cover information

Global warming associated with climate change is one of the greatest challenges of today’s world. Increasing emissions of the greenhouse gas CO₂ are considered as a major contributing factor to global warming. One regulating factor of CO₂ exchange between atmosphere and land surface is vegetation. Measurements of land cover changes in combination with modelling the Gross Primary Productivity (GPP) can contribute to determine important sources and sinks of CO₂.The aim of this study is to accurately model the GPP for a region in West Africa with a spatial resolution of 250 m, and the differentiation of GPP based on woody and herbaceous vegetation. For this purpose, the Regional Biomass Model (RBM) was applied, which is based on a Light Use Efficiency (LUE) approach. The focus was on the spatial enhancement of the RBM from the original 1000–250 m spatial resolution (RBM+). The adaptation to the 250 m scale included the modification of two main input parameters: (1) the fraction of absorbed Photosynthetically Active Radiation (FPAR) based on the 1000 m MODIS MOD15A2 FPAR product which was downscaled to 250 m using MODIS NDVI time series; (2) the fractional cover of woody and herbaceous vegetation, which was improved by using a multi-scale approach. For validation and regional adjustments of GPP and the input parameters, in situ data from a climate station and eddy covariance measurements were integrated.The results of this approach show that the input parameters could be improved significantly: downscaling considerably reduces data gaps of the original FPAR product and the improved dataset differed less than 5.0% from the original data for cloud free regions. The RMSE of the fractional vegetation cover varied between 5.1 and 12.7%. Modelled GPP showed a slight overestimation in comparison to eddy covariance measurements. The in situ data was exceeded by 8.8% for 2005 and by 2.0% for 2006. The model results were converted to NPP and also agreed well with previous NPP measurements reported from different studies. Altogether a high accuracy and suitability of the regionally adjusted and downscaled model RBM+ can be concluded. The differentiation between vegetation growth forms allows a separation of long-term and short-term carbon storage based on woody and herbaceous vegetation, respectively.     

Assessing the institutional capacity to adapt to climate change: a case study in the Cambodian health and water sectors

Institutional capacity is an important element for climate change adaptation (CCA) and the development of such capacity is a great challenge in a Least Developed Country like Cambodia where resources are limited. An important first step to increasing capacity is via an understanding of the level of existing capacity; future priorities can then be subsequently identified. This study aimed to assess the capacity of organizations to implement climate change activities in Cambodia in order to provide such a basis for building capacity. Four elements of capacity were investigated in this research: (1) financial resources, (2) cooperation and coordination of stakeholders, (3) availability and quality of information on vulnerability and adaptation to climate change, and (4) the level of understanding of climate change vulnerability and adaptation. The data were collected through semistructured interviews with a wide range of government and non-government informants across a number of sectors. Results of the study showed that informants perceived capacity for CCA to be very constrained, especially in terms of financial resources and cooperation, and addressing these factors was ranked as the highest climate change capacity priority. Institutional capacity constraints were considered to relate more generally to weak governance of CCA. In light of our research findings, the absence of local higher education institutions in CCA activities should be addressed. The support of such institutions would provide an important mechanism to progress both capacity development as well as partnerships and coordination between different types of organizations and relevant sectors.

Policy relevance

Capacity for CCA within Cambodian health and water sectors was perceived to be very constrained across a range of interdependent factors. Increasing funding was ranked as the highest priority for building capacity for CCA; however, governance factors such as ‘improved cooperation’ were also ranked highly. Improving stakeholders' awareness of the availability of adaptation funds and resources, and their responsiveness to funding criteria, is an important implication of our research, as is improving the mobilization of local resources and the private sector. To address the issue of weak cooperation among stakeholders, improving the coordination function of the National Climate Change Committee (NCCC) regarding stakeholder engagement and capacity building is crucial. Ensuring that CCA activities are based on sound information and knowledge from across different disciplines and, importantly, include the perspectives of vulnerable people themselves, ultimately underpins and supports the realization of the above priorities.     

Domestic actions contributing to the mitigation of GHG emissions from power generation in Brazil

Abstract

Continued growth and the privatisation of Brazil's electricity system, which is largely based upon hydropower, is projected to lead to big expansion mainly of natural gas but also coal power stations with a resulting huge growth in greenhouse gases (GHG) emissions unless steps are taken to avoid this. The Brazilian National Program of Power Conservation and Efficient Use of Electrical Energy in terms of avoided GHG emissions (PROCEL), originally created in 1985, is a multi-stakeholder program coordinated by Eletrobrás aimed to reduce the waste of electrical power on both supply and demand side. Initially crippled by lack of funds, a new finance structure introduced in 1994 has greatly increased PROCEL's impact. Here we develop scenarios that suggest that continued expansion of PROCEL's programme, including resources that might be drawn through clean development mechanism (CDM) projects, to meet projected PROCEL targets over the next two decades could avoid approximately one-third of the GHG emissions from the Brazilian power sector. This contribution demonstrates the significant global environmental benefits of PROCEL in addition to national benefits of this innovative programme.     

The design of California's cap-and-trade and its impact on electricity markets

California is considering the adoption of a cap-and-trade regulatory mechanism for regulating the greenhouse gas emissions from electricity and perhaps other industries. Two options have been widely discussed for implementing cap-and-trade in the electricity industry. The first is to regulate the emissions from electricity at the load-serving entity (LSE) level. The second option for implementation of cap-and-trade has been called the ‘first-seller’ approach. Conceptually, under first-seller, individual sources (i.e. power plants) within California would be responsible for their emissions, as with traditional cap-and-trade systems. Emissions from imports would be assigned to the ‘importing firm’. An option that has not been as widely discussed is to implement a pure source-based system within California, effectively excluding imports from the cap-and-trade system altogether. This article examines these three approaches to implementing cap-and-trade for California's electricity sector. The article discusses many of the issues relating to measurement and the impacts on bidding and scheduling incentives that are created by the various regulatory regimes.