Israel's petroleum discovery curve

Oil exploration in Israel began in 1953. Until 1991 a total of 263 exploration wells and 122 development wells were drilled, 3 oil fields and 5 gas fields were discovered, and 4 noncommercial oil discoveries and 1 noncommercial gas discovery were made. Proven in-place reserves amount to 70 million barrels of oil equivalent (MMBOE). Exploration focused on six main plays: Syrian Arc anticlines; Mesozoic platform-edge, structural-stratigraphic traps; the Dead Sea graben; Early Mesozoic structures; Saqiye Group biogenic gas; and Hula Group biogenic gas. The more significant discoveries are associated with the first two plays. Ninety percent of the proven reserves were discovered by the first 71 wildcats, which constitute 27 percent of all wildcats drilled to date. During this phase of exploration, the average success was 7 percent, and the average discovery rate was 0.88 MMBOE per wildcat. Most of the following 192 wildcats were dry holes. If, as experts claim, significant reserves are still undiscovered, previous exploration must be deemed inefficient. The quantitative model of the discovery process also leads to such an assessment.     

A petroleum discovery-rate forecast revisited—The problem of field growth

A forecast of the future rates of discovery of crude oil and natural gas for the 123,027-km² Miocene/Pliocene trend in the Gulf of Mexico was made in 1980. This forecast was evaluated in 1988 by comparing two sets of data: (1) the actual versus the forecasted number of fields discovered, and (2) the actual versus the forecasted volumes of crude oil and natural gas discovered with the drilling of 1,820 wildcat wells along the trend between January 1, 1977, and December 31, 1985. The forecast specified that this level of drilling would result in the discovery of 217 fields containing 1.78 billion barrels of oil equivalent; however, 238 fields containing 3.57 billion barrels of oil equivalent were actually discovered. This underestimation is attributed to biases introduced by field growth and, to a lesser degree, the artificially low, pre-1970's price of natural gas that prevented many smaller gas fields from being brought into production at the time of their discovery; most of these fields contained less than 50 billion cubic feet of producible natural gas.     

Debates about the pre-Variscan tectonics of Poland

Summary The tectonic nature of the deformed Early Palaeozoic belt along the southwestern border of the East European Craton (EEC) has long been debated. The essence of these debates is reviewed and the recently published map of the Variscan tectonics in Poland is discussed from methodological and regional points of view. The terrane origin of the Pomeranian and ysogóry regions is questioned; they are inferred to be parts of the passive margin of the EEC (miogeocline), deformed into a marginal fold-and-thrust belt. The Maopolska Block and especially the Upper Silesian Block could be Caledonian (proximal?) terranes.     

Topography and geology of Hyperion

I have mapped the Saturnian satellite Hyperion using Voyager 2 images obtained in 1981 and a shape model derived from the results of Thomas et al. (1995). The results are presented in tabular and graphic form, including detailed shaded relief maps of the satellite. The shape is approximated by a triaxial ellipsoid with axes of 270, 201 and 336 km. The volume is estimated to be 9.5 ± 2.0 × 10⁶ km³. Geological interpretations were augmented by the use of super-resolution image composites. The surface is heavily cratered. A system of scarps and an isolated mountain are interpreted as the rim and central peak of an impact crater with a diameter similar to the mean diameter of the satellite itself, the largest crater with recognizable impact morphology in relation to the size of the body yet observed in the solar system. The crater density dates that impact, not the formation of Hyperion. Grooves are identified in several images, and form part of a zone of fracturing radial to a prominent crater.University of Western Ontario     

苏州三维城市地质信息管理与服务系统框架与应用

基于Map GIS K9-TDE平台,以数据库技术、GIS技术、3D地质建模与可视化技术、计算机网络技术综合构建了集城市地理、基础地质、水工环地质、地质灾害、物化遥等多专业、多源数据融合与管理、可视化分析、模型评价及辅助决策功能于一体的城市地质信息管理与服务系统,为专业技术人员和管理者提供综合化、智能化的计算机工作平台,实现城市地质工作更好地服务于政府及社会的宗旨。     

The present-day state of tectonic stress in the Darling Basin,Australia: Implications for exploration and production

Knowledge of the full present-day stress tensor and pore pressure has significant applications in the exploration and production of conventional and unconventional hydrocarbon reservoirs. The Darling Basin of New South Wales, Australia, is an old sedimentary basin (Late Cambrian/Silurian to Early Carboniferous) in which there was limited information about the present-day stress field prior to this study. In this paper we evaluate the contemporary stress field of the Darling Basin using a dataset from recent exploration wells and perform a geomechanical risk assessment with respect to borehole stability, fracture/fault generation and reactivation. Our interpretations of borehole failures in borehole image logs reveal a prevailing east-west orientation of the maximum horizontal stress throughout the Darling Basin. The estimates of the magnitudes for the vertical, minimum and maximum horizontal stress in the studied wells indicate a transition between thrust and strike-slip faulting stress regime at 600–700 m depths, where the magnitude of vertical stress and minimum horizontal stress are close to each other. However, the presence of borehole breakouts and drilling-induced tensile fractures, that we observe in the image logs at greater depths (900–2100 m) indicate a transition into a strike-slip tectonic stress regime below a depth range of approximately 700–900 m. These findings are in agreement with overcoring stress measurements east and west of the investigated wells. Furthermore, there are several Neogene-to-Recent geological structures in the study area that indicate thrust faulting with an east-west oriented maximum horizontal stress orientation around this old sedimentary basin. The consistency between the orientation of maximum horizontal stress determined from wellbore data and neotectonic structures is significant, and implies that horizontal stress orientations derived from very recent geological features may be valuable inputs to geomechanical models in the absence of wellbore or other data. However, the recent surface geological structures suggest a thrust faulting stress regime that is in slight contrast to the transition between thrust and strike-slip stress regime (S_H > S_h ∼ S_v) indicated by petroleum data, and highlights a potential pitfall of using neotectonic structures in geomechanical models. In particular, careful attention and verification should be made when using neotectonic structures for input, calibration or confirmation of geomechanical models, especially in intraplate tectonic settings such as Australia.     

Provenance of Triassic sandstones on the southwest Barents Shelf and the implication for sediment dispersal patterns in northwest Pangaea

Thick Triassic siliciclastic units form major reservoir targets for hydrocarbon exploration on the Barents Shelf; however, poor reservoir quality, possibly associated with variation in provenance, remains a key risk factor in the area. In this study, sandstone dispersal patterns on the southwest Barents Shelf are investigated through petrographic and heavy mineral analysis, garnet and rutile geochemistry and zircon U-Pb geochronology. The results show that until the Early Norian Maximum Flooding Surface, two contrasting sand types were present: (i) a Caledonian Sand Type, characterised by a high compositional maturity, a heavy mineral assemblage dominated by garnet and low chrome-spinel:zircon (CZi) values, predominantly metapelitic rutiles and mostly Proterozoic and Archaean detrital zircon ages, interpreted to be sourced from the Caledonides, and (ii) a Uralian Sand Type, characterised by a low compositional maturity, high CZi values, predominantly metamafic rutiles and Carboniferous zircon ages, sourced from the Uralian Orogeny. In addition, disparity in detrital zircon ages of the Uralian Sand Type with contiguous strata on the northern Barents Shelf reveals the presence of a Northern Uraloid Sand Type, interpreted to have been sourced from Taimyr and Severnaya Zemlya. As such, a coincidental system is inferred which delivered sand to the Northern Barents Shelf in the late Carnian/early Norian. Following the Early Norian Maximum Flooding Surface, a significant provenance change occurs. In response to Late Triassic/Early Jurassic hinterland rejuvenation, supply from the Uralian Orogen ceased and the northern Scandinavian (Caledonian) source became dominant, extending northwards out on to the southwest Barents Shelf. The data reveal a link between reservoir quality and sand type and illustrate how provenance played an important role in the development of clastic reservoirs within the Triassic of the Barents Shelf.     

Petroleum generation characteristics of heterogeneous source rock from Chia Gara formation in the Kurdistan region,northern Iraq as inferred by bulk and quantitative pyrolysis techniques

This study is the first attempt which provides information regarding the bulk and quantitative pyrolysis results of the Chia Gara Formation from the Kurdistan region, northern Iraq. Ten representative early-mature to mature samples from the Chia Gara Formation were investigated for TOC contents, Rock Eval pyrolysis, pyrolysis-GC and bulk kinetic parameters. These analyses were used to characterize the petroleum generated during thermal maturation of the Chia Gara source rock and to clarify the quantity of the organic matter and its effect on the timing of petroleum generation.Pyrolysis HI data identified two organic facies with different petroleum generation characteristics; Type II–III kerogen with HI values of >250 mg HC/g TOC, and Type III kerogen with HI values < 100 mg HC/g TOC. These types of kerogen can generate liquid HCs and gas. This is supported by the products of pyrolysis–gas chromatography (Py–GC) analysis of the extracted rock samples. Pyrolysis products show a dominance of a marine organic matter with variable contributions from terrestrial organic matter (Types II–III and III kerogen), and produces mainly paraffinic-naphthenic-aromatic low wax oils with condensate and gas.Bulk kinetic analysis of the Chia Gara source rock indicates a heterogeneous organic matter assemblage, typical of restricted marine environments in general. The activation energy distributions reveal relatively broad and high values, ranging from 40 to 64 kcal/mol with pre-exponential factors varying from 2.2835 E+12/sec to 4.0920 E+13/sec. The predicted petroleum formation temperature of onset (TR 10%) temperatures ranges from 110 to 135 °C, and peak generation temperatures (geological T_max) between 137 °C and 152 °C. The peak generation temperatures reach a transformation ratio in the range of 42–50% TR, thus the Chia Gara source rock could have generated and expelled significant quantities of petroleum hydrocarbons in the Kurdistan of Iraq.     

铀矿地质勘探设施退役治理的环境影响

文章阐述了铀矿地质勘探设施及其环境影响特点、主要工程子项退役治理方案。深入分析了铀矿地质勘探设施退役治理工程的实施过程中环境影响关注重点,包括废石堆稳定性、坑口废水等。结合实施的项目提出针对性措施建议,为进一步提高此类项目治理的环境效果、减轻环境影响提供技术支撑。     

Mineralogy and Geotechnical Properties of Ultrasoft Soil from a Nearshore Mine Tailings Sedimentation Pond

An engineering geological study was undertaken to determine the engineering properties, and mineralogy of ultrasoft soils (USS) obtained from a nearshore mine tailings sedimentation pond. The USS is a high plasticity clay of high water content and low shear strength. Marine bathymetric and seismic reflection surveys were undertaken in the sedimentation pond located in the foreshore of the Eastern part of the Republic of Singapore. Specimens collected from the bore holes were tested to determine the engineering and mineralogy properties of the USS. Field vane shear tests were undertaken just adjacent to the sampling bore holes to determine the shear strength properties of the USS. The mineralogical properties of the USS were determined using X-ray diffraction and scanning electron microscope techniques. The USS is under consolidated soil where higher density and lower water content were found at deeper depth. The USS had three different compression indices under three log cycles of effective stress between 1–10, 10–100, and 100–1,000 kPa. This is the main characteristic of USS, which diverts from reconstituted soil. The outcome of this research is fundamental for understanding the compression behavior and subsequently the development of a constitutive model for USS, typical found in sedimentary pond.