因子分析在海河流域石油类污染综合评价中的应用(英文)

基于因子分析对2012~2013年海河流域pH、DO、COD、BOD5、氨态氮和总石油烃等6项水质指标的监测数据进行统计,并对其中四项指标进行水污染综合指数评估,旨在对海河水质进行较为系统的评价。结果显示,BJ1和HB2两个站位水质属于Ⅳ类标准,其余各站位均为Ⅴ类;各站位综合评价结果得到海河流域指数为1.44,说明海河流域处于污染状态,其污染程度超过该流域功能区的标准。因子分析发现,COD、DO和NH3-N之间差异显著(P0.05);主成分分析显示,除pH和BOD5外,其余指标都在0.70以上;COD、DO、NH3-N和TPH的贡献率较高,其中总石油烃的贡献率为100%,因此可以认为该海域的污染类型属于有机污染,且石油烃污染较为突出。     

Improved understanding of petroleum migration history in the Hongche fault zone,northwestern Junggar Basin (northwest China): Constrained by vein-calcite fluid inclusions and trace elements

Calcite veins and cements occur widely in Carboniferous and Permian reservoirs of the Hongche fault zone, northwestern Junggar Basin in northwest China. The calcites were investigated by fluid inclusion and trace-element analyses, providing an improved understanding of the petroleum migration history. It is indicated that the Hongche fault behaved as a migration pathway before the Early Cretaceous, allowing two oil charges to migrate into the hanging-wall, fault-core and footwall reservoirs across the fault. Since the Late Cretaceous, the Hongche fault has been sealed. As a consequence, meteoric water flowed down only into the hanging-wall and fault-core reservoirs. The meteoric-water incursion is likely an important cause for degradation of reservoir oils. In contrast, the footwall reservoirs received gas charge (the third hydrocarbon event) following the Late Cretaceous. This helps explain the distribution of petroleum across the fault. This study provides an example of how a fault may evolve as pathway and seal over time, and how reservoir diagenetic minerals can provide clues to complex petroleum migration histories.     

Palynology and petroleum potential of the Kazhdumi Formation (Cretaceous: Albian–Cenomanian) in the South Pars field,northern Persian Gulf

The Kazhdumi Formation of the Bangestan Group is a well-known source rock that has produced abundant oil in most petroleum fields in the Zagros Basin, which stretches from northwest to southwest Iran over hundreds of kilometres. The formation reaches a thickness of 230 m at the type section in northwest Zagros but thins out to 40–50 m in wells studied from the South Pars giant petroleum field, where it comprises mainly grey shales with occasional intercalations of marls and sandstones. South Pars, best known as the Iranian part of the world's largest non-associated gas field, contains small quantities of oil above and below the Kazhdumi Formation.     

Geochemical overview and undiscovered gas resources generated from Hamitabat petroleum system in the Thrace Basin,Turkey

Since the first drill in 1957, three oil, 19 gas and condensate fields have been discovered in the Thrace Basin. However, any petroleum system with its essential elements and processes has not been assigned yet. This study consists of two parts, (1) geochemical overview of the previous work in order to get a necessary help to construct a petroleum system and (2) calculation of quantitative undiscovered hydrocarbon resources generated from this system. An extensive overview study showed that the primary reservoir and source rocks in the Thrace Basin are the Middle Eocene Hamitabat sandstones and shales, respectively, hence it appears that the most effective petroleum system of the Thrace Basin becomes the Hamitabat (!) petroleum system. Currently, 18.5 billion m³ of in-place gas, 2.0 million m³ (12.7 million bbl) in-place waxy oil as well as minor amount of associated condensate were discovered from this system. This study showed that the regional distribution of the oil and gas fields almost overlapped with the previously constructed pod of active Hamitabat shales implying that short and up-dip vertical migration pathway of hydrocarbons from the source to trapping side was available. Thermal model demonstrated that hydrocarbon generation from the Hamitabat shales commenced in the Early Miocene. The amount of quantitative gas generation based on the mean-original TOC = 0.94 wt%, mean-original HI = 217 HC/g TOC and the volume of the pod of active source rock = 49 km³ is approximately 110 billion m³ of gaseous hydrocarbons that results in a high generation–accumulation efficiency of 17% when 18.5 billion m³ of already discovered hydrocarbons are considered.     

Petroleum composition in the Cuu Long Basin (Mekong Basin) offshore southern Vietnam

The Cuu Long Basin (Mekong Basin) is a rift basin off southern Vietnam, and the most important petroleum producing basin in the country. However, information on petroleum type and characteristics has hitherto been largely unavailable to the public. This paper presents petroleum geochemical data on nine oil samples from four different producing fields in the Cuu Long Basin: the Dragon (Rong), Black Lion (Sutu-Den), Sunrise (Rang ?ong) and White Tiger (Bach Ho) Fields. The oils are highly paraffinic with bimodal normal alkane distributions and show moderate pristane to phytane ratios and a conspicuous hyperbolic decrease in abundance with increasing carbon number of hopane homologues from C₃₀ to C₃₅. The TPP-index of Holba et al. (Holba, A.G., Dzou, L.I., Wood, G.D., Ellis, L., Adam, P., Schaeffer, P., Albrecht, P., Greene, T., Hughes, W.B., 2003. Application of tetracyclic polyprenoids as indicators of input from fresh–brackish water environments. Organic Geochemistry 34, 441–469) is equal to 1 in all samples which in combination with tricyclic triperpane T26/T25 ratios >1 and the n-alkane and hopane distributions mentioned above provide a strong indication of an origin from lacustrine source rocks. This is supported by the absence of marine C₃₀ desmethyl steranes (i.e. 24-n-propylcholestanes) and marine diatom-derived norcholestanes. Based on the overall biological marker distributions, the lakes probably belonged to the overfilled or balanced-fill types defined by Bohacs et al. (Bohacs, K.M., Carroll, A.R., Neal, J.E., Mankiewicz, P.J., 2000. Lake-basin type, source potential, and hydrocarbon character. An integrated sequence-stratigraphic–geochemical framework. AAPG Studies in Geology 46, 3–34). The oils were generated from source rocks at early- to mid-oil-window maturity, presumably Oligocene lacustrine shales that are present in the syn-rift succession. Oils from individual fields may, however, be distinguished by a combination of biological marker parameters, such as the oleanane index, the gammacerane index, the relative abundance of tricyclic terpanes, the proportions of diasteranes and 28-norspergulane, complemented by other parameters. The oils of the Cuu Long Basin show an overall similarity to the B-10 oil from the Song Hong Basin off northern Vietnam, but are markedly different from the seepage oils known from Dam Thi Nai on the coast of central Vietnam.     

Modeling an atypical petroleum system: A case study of hydrocarbon generation,migration and accumulation related to igneous intrusions in the Neuquen Basin,Argentina

In the Altiplanicie del Payún area (Neuquen Basin, Argentina), immature source rock sections intruded by up to 600 m thick Tertiary laccoliths show full spectrum maturity aureoles over hundreds of meters from the contacts. Commercial oil accumulations (20–33°API) and oil shows are located along the entire column, both in sandstone/carbonate and fractured igneous reservoirs. A challenging numerical model that included the emplacement of the intrusive bodies, with extreme temperature ranges and unusually short calculation time steps, has been done with the aim to better understand hydrocarbon generation and migration processes related to these thermal anomalies.     

Practical kinetic modeling of petroleum generation and expulsion

Models for petroleum generation used by the industry are often limited by (a) sub-optimal laboratory pyrolysis methods for studying hydrocarbon generation, (b) over-simple models of petroleum generation, (c) inappropriate mathematical methods to derive kinetic parameters by fitting laboratory data, (d) primitive models of primary migration/expulsion and its coupling with petroleum generation, and (e) insufficient use of subsurface data to constrain the models. Problems (a), (b) and (c) lead to forced compensation effects between the activation energies and frequency factors of reaction kinetics that are wholly artificial, and which yield poor extrapolations to geological conditions. Simple switch or adsorption models of expulsion are insufficient to describe the residence time of species in source rocks. Yet, the residence time controls the thermal stresses to which the species are subjected for cracking to lighter species.     

Scientific advice in integrated ocean management: The process towards the Barents Sea plan

It is widely held that integrated management of ocean areas needs to be based on integrated scientific advice. Such advice crosses disciplinary and traditional sector boundaries. This paper aims to provide insight into the role of science and scientific knowledge in a process towards integrated ocean management. It does so by exploring the organization of the process towards the integrated management plan for the Barents Sea-Lofoten area in Norway. It sheds light on the complexity of management questions in a context characterized by uncertainty and political controversy, largely concerning petroleum activity. Scientists were asked to provide a dynamic view on these issues and have delivered important material that furthers the task of policy development. However, there is a persisting lack of understanding about the consequences of human impact on the ecosystem. The paper finishes by pointing at the need for a larger societal discussion on what activities we consider appropriate, considering the limits of science to provide the knowledge base for questions that transcend the environmental domain.     

Oil migration driven by exhumation of the Canol Formation oil shale: A new conceptual model for the Norman Wells oil field,northwestern Canada

Thermal history, petroleum system, structural, and tectonic constraints are reviewed and integrated in order to derive a new conceptual model for the Norman Wells oil field, and a new play type for tectonically active foreland regions. The thermal history recorded by Devonian rocks suggests that source rocks experienced peak thermal conditions in the Triassic–Jurassic, during which time oil was likely generated. After initial oil generation and expulsion, the Canol Formation oil shale retained a certain fraction of hydrocarbons. The shallow reservoir (650–350 m) is a Devonian carbonate bank overlain by the Canol Formation and resides within a hanging wall block of the Norman Range thrust fault. Both reservoir and source rocks are naturally fractured and have produced high API non-biodegraded oil. Thrust faults in the region formed after the Paleocene, and a structural cross-section of the field shows that the source and reservoir rocks at Norman Wells have been exhumed by over 1 km since then.The key proposition of the exhumation model is that as Canol Formation rocks underwent thrust-driven exhumation, they crossed a ductile–brittle transition zone and dip-oriented fractures formed sympathetic to the thrust fault. The combination of pore overpressure and new dip-directed subvertical fractures liberated oil from the Canol Formation and allowed for up-dip oil migration. Reservoir rocks were similarly fractured and improved permeability enhanced charging and pooling of oil. GPS and seismicity data indicate that strain transfer across the northern Cordillera is a response to accretion of the Yakutat terrane along the northern Pacific margin of North America, which is also the probable driving force for foreland shortening and rock exhumation at Norman Wells.     

Geochemistry,origin, and accumulation of petroleum in the Eocene Wenchang Formation reservoirs in Pearl River Mouth Basin,South China Sea: A case study of HZ25-7 oil field

The Pearl River Mouth Basin in the South China Sea has accumulated >2 km of Eocene sediments in its deep basin, and has become the exploration focus due to the recent discoveries of the HZ25-7 oil field in the Eocene Wenchang (E₂w) Formation. In this study, the geochemical characteristics of potential source rocks and petroleum in the HZ25-7 oil field are investigated and the possible origins and accumulation models developed. The analytical results reveal two sets of potential source rocks, E₂w and Enping (E₂e) formations developed in the study area. The semi-deep-to-deep lacustrine E₂w source rocks are characterized by relatively low C₂₉ steranes, low C₁₉/C₂₃ tricyclic terpane (<0.6), low C₂₄ tetracyclic terpane/C₃₀ hopane (<0.1), low trans-trans-trans-bicadinane (T)/C₃₀ hopane (most <2.0), and high C₃₀ 4-methyl sterane/ΣC₂₉ sterane (>0.2) ratios. In contrast, the shallow lacustrine and deltaic swamp-plain E₂e source rocks are characterized by relatively high C₂₉ steranes, high C₁₉/C₂₃ tricyclic terpane (>0.6), high C₂₄ tetracyclic terpane/C₃₀ hopane (>0.1), variable yet overall high T/C₃₀ hopane, and low C₃₀ 4-methyl sterane/ΣC₂₉ sterane (<0.2) ratios. The relatively low C₁₉/C₂₃ tricyclic terpane ratios (mean value: 0.39), low C₂₄ tetracyclic terpane/C₃₀ hopane ratios (mean value: 0.07), high C₃₀ 4-methyl sterane/ΣC₂₉ sterane ratios (mean value: 1.14), and relatively high C₂₇ regular sterane content of petroleum in the HZ25-7 oil field indicate that the petroleum most likely originated from the E₂w Formation mudstone in the Huizhou Depression. One stage of continuous charging is identified in the HZ25-7 oil field; oil injection is from 16 Ma to present and peak filling occurs after 12 Ma. Thin sandstone beds with relatively good connectivity and physical properties (porosity and permeability) in the E₂w Formation are favorable conduits for the lateral migration of petroleum. This petroleum accumulation pattern implies that the E₂w Formation on the western and southern margins of the Huizhou Depression are favorable for petroleum accumulation because they are located in a migration pathway. Thus exploration should focus in these areas in the future.