The last deglaciation in the Picos de Europa National Park (Cantabrian Mountains,northern Spain)

A sedimentological and geochemical study of the Lago Enol sequence (Cantabrian Mountains, northern Spain), together with detailed geomorphological mapping, provides a first record of glacier evolution and climate change over the last 40 ka in the Picos de Europa National Park. The Enol glacier retreated from its maximum extent prior to 40 ka BP as demonstrated by the onset of proglacial lacustrine sedimentation in two glaciated depressions: the Comella hollow to the north (before 40 ka BP) and the Lago Enol (before 38 ka BP). These results support previous evidence that the maximum extent of southern European glaciers occurred earlier than in northern Europe. Alternation of homogeneous and laminated proglacial sediments during the glacier retreat illustrate a dynamic glacial evolution during the Marine Isotope Stage (MIS) 3 (40–26 ka BP). A slight warming is detected at 26 ka ago with the change from proglacial sediments (in a lake located in contact to the glacier) to glaciolacustrine sedimentation (in a non‐contact or distal lake). Finally, the onset of organic‐rich sediments took place at 18 ka ago. This last transition occurred in two phases, similarly to the North Atlantic Last Termination, suggesting a link between North Atlantic Deep Water formation oscillations and palaeohydrological variability in the Cantabrian Mountains. Copyright © 2009 John Wiley & Sons, Ltd.     

Neural network-based model for assessing failure potential of highway slopes in the Alishan, Taiwan Area: Pre- and post-earthquake investigation

This paper is aimed at creating an empirical model for assessing failure potential of highway slopes, with a special attention to the failure characteristics of the highway slopes in the Alishan, Taiwan area prior to, and post, the 1999 Chi-Chi, Taiwan earthquake. The basis of the study is a large database of 955 slope records from four highways in the Alishan area. Artificial neural network (ANN) is utilized to “learn” from this database. The developed ANN model is then used to study the effect of the Chi-Chi earthquake on the slope failure characteristics in the Alishan area. Significant changes in the degrees of influence of several factors (variables) are found and possible reasons for such changes are discussed. The novelty of this paper lies in the fact that the developed ANN models are used as a tool to investigate the slope failure characteristics before and after the Chi-Chi earthquake.     

Trend analysis and ARIMA modelling of pre-monsoon rainfall data for western India

Spatial and temporal variability of rainfall over different seasons influence physical, social and economic parameters. Pre-monsoon (March, April and May – MAM) rainfall over the country is highly variable. Since heat lows and convective rainfall in MAM have an impact on the intensity of the ensuing monsoons, hence the pre-monsoon period was chosen for the study. The pre-whitened Mann Kendall test was used to explore presence of rainfall trend during MAM. The results indicate presence of significant (at 10% level) increasing trend in two stations (Ajmer, Bikaner). The practical significance of the change in rainfall was also explored as percentage changes over long term mean, using Theil and Sen's median slope estimator. Forecast using univariate ARIMA model for pre-monsoon months indicates that there is a significant rise in the pre-monsoon rainfall over the northwest part of the country.     

Some foundation stability problems of the railway bridge over the Mala Rijeka

SummarySome Foundation Stability Problems of the Railway Bridge over the Mala Rijeka The authors presented an outlay of problems occurring in estimating the stability of rocky slopes loaded by large vertical forces. General attitudes, kept by the authors during the stability analysis for an actual case — foundation of piers No. 3 and 4 of the railway bridge across the Mala Rijeka, are also presented. The results of calculation as well as the advantages of the approach applied are outlined in the paper. Finally, general conclusions are drawn regarding the method to be kept in solving the stability of slopes loaded by large artificial loading.With 7 Figures     

地震作用下非贯通节理岩体斜坡破坏的物理模型试验研究

地震作用下高斜坡破坏的发生发展过程比较短暂、剧烈,破坏机理相对复杂。本文采用模型试验的方法来研究地震作用下非贯通节理岩体斜坡的反应。试验结果表明:节理上的应变最大,模型上部应变大于下部应变;节理贯通机理复杂,多为拉剪复合型破坏;节理的贯通并不意味着斜坡的破坏,而是破坏了斜坡的整体性,使其处于临界状态。试验揭示了此类斜坡在地震作用下的动力响应及破坏机理,可为理论和工程实践应用提供有益的参考和指导。     

Experimental study on the effects of artificial bed roughness on turbidity currents over abrupt bed slope change

A series of experimental observations are presented in the current study to discuss the effects of artificial bed roughness on the turbidity current flowing in a rectangular channel with an abrupt change in bed slope.For this purpose,two different types of elements,sinusoidal and trapezoidal,with various heights and arrangements are considered as artificial bed roughness.A Vectrino velocity meter was used to measure the velocity and sediment concentration profiles.The effects of inlet sediment concentration on front velocity,body velocity,unit discharge,sediment concentration,and suspended load transport rate also were investigated.Accurate equations were developed for estimation of the velocity of a turbidity current over smooth and rough beds.The unexpected experimental results showed that unlike the effect of roughness height,a change in the roughness arrangement has no significant influence on the velocity of a turbidity current.Also,the effect of bed roughness on the front velocity of a denser current is more significant.     

Centrifuge modelling of landslides and landslide hazard mitigation: A review

Landslides are serious geohazards that occur under a variety of climatic conditions and can cause many casualties and significant economic losses. Centrifuge modelling, as a representative type of physical modelling, provides a realistic simulation of the stress level in a small-scale model and has been applied over the last 50 years to develop a better understanding of landslides. With recent developments in this technology, the application of centrifuge modelling in landslide science has significantly increased. Here, we present an overview of physical models that can capture landslide processes during centrifuge modelling. This review focuses on (i) the experimental principles and considerations, (ii) landslide models subjected to various triggering factors, including centrifugal acceleration, rainfall, earthquakes, water level changes, thawing permafrost, excavation, external loading and miscellaneous conditions, and (iii) different methods for mitigating landslides modelled in centrifuge, such as the application of nails, piles, geotextiles, vegetation, etc. The behaviors of all the centrifuge models are discussed, with emphasis on the deformation and failure mechanisms and experimental techniques. Based on this review, we provide a best-practice methodology for preparing a centrifuge landslide test and propose further efforts in terms of the seven aspects of model materials, testing design and equipment, measurement methods, scaling laws, full-scale test applications, landslide early warning, and 3D modelling to better understand the complex behaviour of landslides.     

Progressive failure of sheeted rock slopes: the 2009–2010 Rhombus Wall rock falls in Yosemite Valley,California, USA

Progressive rock‐fall failures in natural rock slopes are common in many environments, but often elude detailed quantitative documentation and analysis. Here we present high‐resolution photography, video, and laser scanning data that document spatial and temporal patterns of a 15‐month‐long sequence of at least 14 rock falls from the Rhombus Wall, a sheeted granitic cliff in Yosemite Valley, California. The rock‐fall sequence began on 26 August 2009 with a small failure at the tip of an overhanging rock slab. Several hours later, a series of five rock falls totaling 736 m³ progressed upward along a sheeting joint behind the overhanging slab. Over the next 3 weeks, audible cracking occurred on the Rhombus Wall, suggesting crack propagation, while visual monitoring revealed opening of a sheeting joint adjacent to the previous failure surface. On 14 September 2009 a 110 m³ slab detached along this sheeting joint. Additional rock falls between 30 August and 20 November 2010, totaling 187 m³, radiated outward from the initial failure area along cliff (sub)parallel sheeting joints. We suggest that these progressive failures might have been related to stress redistributions accompanying propagation of sheeting joints behind the cliff face. Mechanical analyses indicate that tensile stresses should occur perpendicular to the cliff face and open sheeting joints, and that sheeting joints should propagate parallel to a cliff face from areas of stress concentrations. The analyses also account for how sheeting joints can propagate to lengths many times greater than their depths behind cliff faces. We posit that as a region of failure spreads across a cliff face, stress concentrations along its margin will spread with it, promoting further crack propagation and rock falls. Published in 2012. This article is a US Government work and is in the public domain in the USA.     

Surface sealing as influenced by slope angle and position of simulated stones in the top layer of loose sediments

The influence of five different slope angles and two different positions of simulated stones in the top layer of a sandy and a silty sediment on surface sealing intensity is examined in the laboratory. Sealing intensity is assessed by studying changes of percolation rate through a sediment layer with simulated rainfall duration and by measuring cohesion of the 5 mm thick upper sediment layer, a measure of seal strength, by means of a torvane. Slope has a negative influence on sealing intensity. For a constant per cent of simulated stone cover, sealing intensity is lowest in the case of stones placed on the sediment surface compared to the case of stones pushed into the surface layer. Explanations for these findings are given and some implications are further discussed.     

The influence of weathering on the geotechnical properties and slope angles of mudstone in the Mineoka earth-slide area,Japan

Three active earth-slide slopes of Tertiary mudstone were investigated: Slope 1 has an angle of 17 ?4°, Slope 2 of 12.9°, and Slope 3 of 11.6°. Infinite slope analysis indicated that the instability of these three slopes can be well explained by using the residual strength parameters of earth-slide soils near the sliding surface in conjunction with the highest ground water table. The residual angle of shearing resistance, ø'_r, plays an important role in the determination of slope angle because it differs greatly among slopes. Mineralogical studies and X-ray diffraction analyses were performed for the clay minerals included in the slope material. The results showed that illite and chlorite were found in Slope 1, and also in Slopes 2 and 3 together with interstratified illite/montmorillonite and montmorillonite. The degree of weathering is progressive in order of Slopes 1, 2 and 3. The alteration of clay minerals by weathering causes the reduction in ø'_r -values, i.e., 19.4° in Slope 1 (steep, less weathered) and 12.1-9.2° in Slopes 2 and 3 (gentle, much more weathered). This result indicates that the degree of weathering has a great influence on the value of ø'_r, which in turn determines the slope angle.