BP神经网络在高程异常反演预测中的应用分析

利用C#语言编制了BP神经网络反演预测程序,基于具有代表性地区的高程异常数据,对BP神经网络在高程异常反演预测中的应用进行了分析。结果表明,本程序交互界面良好,具有很好的通用性;同时,在高程异常反演预测中取得良好的效果,说明神经网络在差异较大的数据反演预测方面仍具有较强的优势。     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

Advances in understanding of the mechanism for generation of earthquake thermal precursors detected by satellites

Stresses building up during an earthquake preparation phase also manifest themselves in the form of a so called increased land surface temperature (LST) leading to a thermal precursor prior to the earthquake event. This phenomenon has now been validated by our observations of short-term thermal anomalies detected by infrared satellite sensors for several recent past earthquakes around the world. The rise in infrared radiance temperature was seen to vary between 5 and 12 °C for different earthquakes. We discuss in this paper different explanations for the generation of such anomalies that have been offered. Emission of gases due to the opening and closure of micropores upon induced stresses and also the participation of ground water have been propounded as a possible cause for generation of thermal anomalies. Seismo-ionosphere coupling, by which gases like radon move to the earth–atmosphere interface and cause air ionization thus bringing about a change in air temperature, relative humidity, etc., has been put forth by some workers. A mechanism of low frequency electromagnetic emission was tested and experimented by scientists with rock masses in stressed conditions as those that exist at tectonic locations. The workers proposed the positive hole pair theory, which received support from several scientific groups. Positive holes (sites of electron deficiency) are activated in stressed rocks from pre-existing yet dormant positive hole pairs (PHPs) and their recombination at rock–air interface leads to a LST rise. A combination of remote sensing detection of rock mechanics behavior with a perception of chemistry and geophysics has been applied to propose the remote sensing rock mechanics theory. Remote sensing detections of such anomalies confirm so far proposed lab theories for such a hotly debated field as earthquake precursor study by providing unbiased observations with consistency in time and space distribution.     

局部大地水准面精化系统软件的设计与实现

给出了局部大地水准面精化系统的总体结构以及各分系统的详细设计与实现方法,开发了旨在对相关重力测量数据实现自动化处理的局部大地水准面精化系统工具软件,并应用于某区域实际大地水准面的精确计算。实践证明,该系统能有效提高相关数据的处理效率,有助于局部大地水准面精化过程的规范化。     

低轨卫星初始状态误差对反演地球重力场的影响

基于动力学法反演地球重力场的基本理论,研究了卫星初始状态向量误差对应用低轨卫星精密轨道数据反演地球重力场的影响。在仅考虑低轨卫星初始状态误差的情况下进行了模拟计算,结果表明:在利用低轨卫星精密轨道数据反演地球重力场时,卫星初始状态向量误差需要重新进行估计;在目前的轨道精度水平下,若不顾及误差方程二次项的影响,反演弧长不宜过长;卫星初始状态速度误差(约1.5mm/s)的影响要大于位置误差(约10 cm)的影响。     

精确高程异常的确定

本文在顾及局部地形改正、椭球改正及大气改正的情况下,采用实测数据,应用Meissel方法和Wenzel频谱分析方法,对某盆地边缘的高程异常进行了实际计算。并将计算结果同多普勒高程异常进行了比较,证明结果是良好的。此外还对我国精确高程异常的确定提出了一些建议。     

精密重力网的定权及系统效应

对于精密重力网,如何确定各类观测值的权,如何剔除相对重力仪过多的参数,是目前尚未解决好的两个问题。本文讨论了利用方差分量估计确定各类观测值的权,利用几种假设检验选择附加参数的方法以及相关的几个问题。经过计算和比较分析,得到了较好的结果。     

建设我国现代大地测量基准的思考

建设现代大地测量基准方面的进展主要表现在IGS服务和ITRF的系列精化 ,ITRF2 0 0 0是ITRF中迄今最为精确、测站最为稠密的地面坐标参考框架 ;2 0 0 1年推出新的WGS84,其成果标以WGS84(G1 1 5 0 )。考虑和顾及现代大地测量的特点 ,结合中国实际 ,我国现代大地测量基准应着重考虑四个方面的基本要素 :高精度、涵盖全部陆海国土、三维、动态。建设我国现代大地测量基准是为用户在我国任何地点、任何时间提供及时、可靠、适用的地理空间基础框架 ,其任务应包括建立我国现代化的平面基准、高程基准和重力基准等。     

扰动重力边值问题与实际数据处理的研究

讨论了应用GPS测量重力点的大地高 ,从而获得地面点的扰动重力 (或称纯重力异常 )值这样新的重力边值条件 ,如何从理论与实际上确定重力场的问题。     

国家地理空间信息基准框架工程建设

提出了国家地理空间信息基准框架内改进与更新原有的大地坐标基准、高程基准和重力基准的建设道路及解决原则。