新疆北塔山晚志留—早泥盆世苔藓虫

本文描述的上志留统一下泥盆统的苔藓虫标本产自新疆东准噶尔北塔山地区。上志留统考克赛组中包括6属7种,它们是:Fistulipora granulosa Astrova, Hallopora xinjiangensis Lu, Semicoscinium pyramidatum Kopaevich, Sem. fragilis Astrova, Chasmatopora sp., Orthopora sp., Sceptropora sp.; 下泥盆统托让格库都克组中包括2属3种:Fistulipora Sp., Semicoscinium baytikensis Wang et Lu(sp. nov.), Sem. kurjensis Nekhoroshev.根据上述苔藓虫组合特征,可建立两个苔藓虫组合,上志留统为Fistulipora granulosa-Hallopora xinjiangensis组合;下泥盆统为Semicoscinium baytikensis-Sem. kurjensis组合。     

衡山花岗岩体西缘韧性剪切带的特征,成因及岩体定位机制

衡山花岗岩体由南岳岩体(早期)和白石峰岩体(晚期)组成,衡山岩体西缘形成有分带明显的韧性剪切带,向西倾斜,在XZ面上呈倾向滑动剪切运动,矿物显微变形构造显示为倾向简单剪切特征。经测定,韧性剪切带形成时温度下限为343.6℃,古差应力下限为52～62MPa,应变速率下限为2.05×10~(-14)/s-3.13×10~(-14)/s,推算总位移量在13.5km左右。在花岗岩体以外没有韧性剪切变形现象,说明该韧性剪切带是衡山岩体定位过程中由白石峰岩体沿南岳岩体边缘侵位的简单剪切作用所形成。     

从闪长质岩石包体角度探讨太行山——燕山造山带壳幔成矿作用

文中首次从闪长质岩包体的角度讨论了上地幔，中，下地壳成分及岩浆演化过程对成矿作用的影响，指出太行山－燕山造山带成矿作用及其区域成矿规律明显受到壳幔成矿体系的制     

龙门山前陆盆地形成与演化

本文将龙门山前陆盆地和龙门山冲断带作为一个地质整体进行了研究，并将构造地层学和层序地层学相结合的综合地层学的分析方法作为分析龙门山前陆盆地沉积的基础，以不整合面和其对应面将盆地充填序列分割为构造层序和层序，对应于不同成盆期和同一成盆期不同演化阶段，阐明龙门山前陆盆地充填序列和沉积体积三维空间配置形式及其在时间上的演化，初步建立了龙门山前陆盆地地层格架，进而研究龙门山冲断带逆部推覆作用对龙门山前陆盆     

昆仑山口西8.1级地震后青藏高原北部地区地震活动初步研究

利用相关震例分析了昆仑山口西8．1级地震后青藏高原北部地区未来1～3年地震活动特征．结果表明,沿东昆仑构造带及邻近地区发生Ms≥7．0地震后青藏高原北部地区中强地震活动有增强的趋势,祁连山地震带和东昆仑地震带的地震活动具有交替发生的特征,未来1～3年中强地震主体活动区为大型走滑活动断裂上应力转换部位和挤压会聚构造区,如东昆仑断裂带中东段和祁连山地震带中东段和西段。     

地物化综合信息在东天山西段的找矿预测结果

利用区域地物化资料,采用多元统计方法及GIS空间分析技术,通过对东天山成矿带中黄山铜镍矿床、小热泉子铜锌矿床的地质、地球物理、地球化学特征的分析,对东天山西段进行了有色金属矿床找矿靶区预测。预测结果认为:色尔特能、铜花山—硫磺山、米什沟、马鞍桥、彩华沟是今后找寻大型有色金属矿床的重要靶区。     

塔里木盆地库鲁克塔格奥陶系牙形石色变指标与有机质成熟度的关系

应用牙形石色变指标(CAI)对塔里木盆地孔雀河斜坡东北段南雅尔当山剖面奥陶系有机质成熟度进行了研究,得出的结果是南雅尔当山却尔却克组产出的牙形石色变指标CAI值为2~2.5,有机质处于成熟阶段.综合研究认为,本区奥陶系烃源岩在中奥陶世逐渐进入生烃门限并快速成熟;在奥陶纪末达到经历的最大古地温,顶部为80℃,底部为180℃,之后遭受抬升剥蚀,区域剥蚀量在2 300 m左右.本区奥陶系烃源岩存在3种生烃类型:第Ⅰ种为南雅尔当山型,为非有效烃源岩;第Ⅱ种为群克1井部分生烃型,奥陶纪末抬升剥蚀后埋深在2 500 m以上的烃源岩(Ⅱ-1型)停止生烃,埋深在2 500 m以下的烃源岩(Ⅱ-2型)持续生烃;第Ⅲ种为二次生烃型,当中新生代的快速沉积使Ⅱ-1型烃源岩顶部埋深达到3 200 m时,相同层位的烃源岩达到经历的最大古地温,开始二次生烃,生烃潜力最大.     

基于实测值分段线性内插模型的InSAR视线向同震位错分解-以青藏高原昆仑山MemＳsub8.1地震为例x,auto,auto,415px);}stylehf=httprztl.com business week launch

利用现场GPS定位的实测值，在尝试过最小二乘拟合并取得初步成果的基础上，进而采用更符合破裂带形态的线性立方插值函数，在破裂带主断面上，建立起一种理论与实测相结合的InSAR视线向(LOS)变化量的分解方程，得到了InSAR视线向位移分解的具有唯一性的解析解. 本文的解析法吸纳了GPS定点实测值的精度优势，利用InSAR全天候、准实时获取连续形变场的技术特点，通过数学近似，最终获得了主破裂带上连续变化的水平位错及垂直位错同震形变曲线.      

Inversion of coseismic stress-triggered fault slips using borehole strainmeter observations

Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the theory of dis location, one can invert the triggered fault slips with such data if he/she has a well understanding about the local faults. Genetic algorithm can be applied to significantly raise the efficiency of searching a best solution among all possibilities in this kind of inversion. A testifying check of the program and analyses of each parameter＇s influence may further enhance the reliability of inversion results. Taking complexity of geological structure into account, the inversion results should be regarded as the predominant property or a comprehensive effect of triggered local faults＇ activities. As an attempt, we inverted the assumingly active faults＇ slips triggered by the Ms=8.1 Kunlun Mountain earthquake over Beijing area.     

The effect of mountainous topography on moisture exchange between the “surface” and the free atmosphere

Typical numerical weather and climate prediction models apply parameterizations to describe the subgrid-scale exchange of moisture, heat and momentum between the surface and the free atmosphere. To a large degree, the underlying assumptions are based on empirical knowledge obtained from measurements in the atmospheric boundary layer over flat and homogeneous topography. It is, however, still unclear what happens if the topography is complex and steep. Not only is the applicability of classical turbulence schemes questionable in principle over such terrain, but mountains additionally induce vertical fluxes on the meso-γ scale. Examples are thermally or mechanically driven valley winds, which are neither resolved nor parameterized by climate models but nevertheless contribute to vertical exchange. Attempts to quantify these processes and to evaluate their impact on climate simulations have so far been scarce. Here, results from a case study in the Riviera Valley in southern Switzerland are presented. In previous work, measurements from the MAP-Riviera field campaign have been used to evaluate and configure a high-resolution large-eddy simulation code (ARPS). This model is here applied with a horizontal grid spacing of 350 m to detect and quantify the relevant exchange processes between the valley atmosphere (i.e. the ground “surface” in a coarse model) and the free atmosphere aloft. As an example, vertical export of moisture is evaluated for three fair-weather summer days. The simulations show that moisture exchange with the free atmosphere is indeed no longer governed by turbulent motions alone. Other mechanisms become important, such as mass export due to topographic narrowing or the interaction of thermally driven cross-valley circulations. Under certain atmospheric conditions, these topographical-related mechanisms exceed the “classical” turbulent contributions a coarse model would see by several times. The study shows that conventional subgrid-scale parameterizations can indeed be far off from reality if applied over complex topography, and that large-eddy simulations could provide a helpful tool for their improvement.