Shear velocity estimates in rough‐bed open‐channel flow

Shear velocity u_* is an important parameter in geophysical flows, in particular with respect to sediment transport dynamics. In this study, we investigate the feasibility of applying five standard methods [the logarithmic mean velocity profile, the Reynolds stress profile, the turbulent kinetic energy (TKE) profile, the wall similarity and spectral methods] that were initially developed to estimate shear velocity in smooth bed flow to turbulent flow over a loose bed of coarse gravel (D₅₀ = 1·5 cm) under sub‐threshold conditions. The analysis is based on quasi‐instantaneous three‐dimensional (3D) full depth velocity profiles with high spatial and temporal resolution that were measured with an Acoustic Doppler Velocity Profiler (ADVP) in an open channel. The results of the analysis confirm the importance of detailed velocity profile measurements for the determination of shear velocity in rough‐bed flows. Results from all methods fall into a range of ± 20% variability and no systematic trend between methods was observed. Local and temporal variation in the loose bed roughness may contribute to the variability of the logarithmic profile method results. Estimates obtained from the TKE and Reynolds stress methods reasonably agree. Most results from the wall similarity method are within 10% of those obtained by the TKE and Reynolds stress methods. The spectral method was difficult to use since the spectral energy of the vertical velocity component strongly increased with distance from the bed in the inner layer. This made the choice of the reference level problematic. Mean shear stress for all experiments follows a quadratic relationship with the mean velocity in the flow. The wall similarity method appears to be a promising tool for estimating shear velocity under rough‐bed flow conditions and in field studies where other methods may be difficult to apply. This method allows for the determination of u_* from a single point measurement at one level in the intermediate range (0·3 < h < 0·6). Copyright © 2013 John Wiley & Sons, Ltd.     

Point dilution tests to calculate groundwater velocity: an example in a porous aquifer in northeast Italy

ABSTRACT

The point dilution test is a single-well technique for estimating horizontal flow velocity in the aquifer surrounding a well. The test is conducted by introducing a tracer into a well section and monitoring its decreasing concentration over time. When using a salt tracer, the method is easy and inexpensive. Traditionally, the horizontal Darcy velocity is calculated as a function of the rate of dilution and is based on the simple assumption that the decreasing tracer concentration is proportional both to the apparent velocity into the test section and to the Darcy velocity in the aquifer. In this article, an alternative approach to analyse the results of point dilution tests is proposed and verified using data acquired at a test site in the middle Venetian plain, northeast Italy. In this approach, the one-dimensional equilibrium advection–dispersion equation is inverted using the CXTFIT model to estimate the apparent velocity inside the test section. Analysis of the field data obtained by the two approaches shows good agreement between the methods and suggests that it is possible to use the equilibrium advection–dispersion equation to estimate apparent velocity over a wide range of velocities.

Editor D. Koutsoyiannis; Associate editor K. Heal     

Two-dimensional imaging of soil–bedrock interface by short-array beamforming technique

The depth to soil–bedrock interface, which is one of the major parameters in the site response analysis, has been often investigated by surface-wave tests. The round-robin tests for a surface-wave method in Korea revealed that a long measurement array in surface-wave tests is not appropriate in locating soil–bedrock interface. In this paper, for the improved profiling of depth to soil–bedrock interface in 2-D image, short measurement array was introduced for the beamforming technique, which is a robust array processing technique adopted in a long-array format for stiffness profiling. Numerical simulation and field applications of the short-array beamforming technique indicate that the method is valid even for surface wave propagation with mode-related complexity. Depth to soil–bedrock interface and shear-wave velocity profiles determined by the short-array beamforming technique were in good agreement with layer stratifications of boring logs, resistivity map, shear-wave velocity profiles of downhole tests and CAP-SASW tests.     

Mesh grading approach for wave propagation in high velocity-contrast media

A mesh grading approach based on investigated lump method has been presented for simulating wave propagation in high velocity-contrast media. Unstructured fine grids are used to discretize the low wave-velocity medium in order to ensure the accuracy of numerical computation, and unstructured coarse grids are used for the high wave-velocity medium in order to substantially reduce the computational cost. On the interface, one coarse grid can match the fine grids of arbitrary odd number. The key feature of the proposed method is the constructions of investigated lumps on the interfaces of media. The transition zone, which is commonly used in the discontinuous grid scheme based on the staggered-grid finite-difference method, will not be used any more. Moreover, the computational instability that the discontinuous grid schemes frequently encountered does not arise in the proposed method. The comparisons with the analytical solutions and the application in studying the effects of sedimentary basin demonstrated that the mesh grading approach is a valid, accurate, convenient and flexible algorithm in simulating wave propagations in high velocity-contrast media with irregular interfaces.     

Dynamic model of mesoscale eddies. Eddy parameterization for coarse resolution ocean circulation models

In the framework of the eddy dynamic model developed in two previous papers (Dubovikov, M.S., Dynamical model of mesoscale eddies, Geophys. Astophys. Fluid Dyn., 2003, 97, 311–358; Canuto, V.M. and Dubovikov, M.S., Modeling mesoscale eddies, Ocean Modelling, 2004, 8, 1–30 referred as I–II), we compute the contribution of unresolved mesoscale eddies to the large-scale dynamic equations of the ocean. In isopycnal coordinates, in addition to the bolus velocity discussed in I–II, the mesoscale contribution to the large scale momentum equation is derived. Its form is quite different from the traditional down-gradient parameterization. The model solutions in isopycnal coordinates are transformed to level coordinates to parameterize the eddy contributions to the corresponding large scale density and momentum equations. In the former, the contributions due to the eddy induced velocity and to the residual density flux across mean isopycnals (so called Σ-term) are derived, both contributions being shown to be of the same order. As for the large scale momentum equation, as well as in isopycnal coordinates, the eddy contribution has a form which is quite different from the down-gradient expression.     

2013年甘肃岷县漳县M_s6.6地震前地壳形变特征研究

基于2013年岷县漳县M6.6地震震源区及其邻区1999年以来的GPS观测资料,通过应变率动态特征分析、多期次GPS剖面分析和基线变形速率的分析讨论了地震的震前变形特征.GPS速度场和块体应变率表明,汶川地震的发生导致了柴达木地块运动与变形状态发生明显调整,但由于西秦岭北缘等深大断裂的存在,岷-秦地块对其响应不明显;GPS连续应变率显示,在汶川地震引起的区域地壳变形调整过程中岷县漳县地震震源区附近的应变积累速率有减缓的迹象;GPS剖面显示,平行于岷县漳县主破裂带的运动分量对汶川地震响应显著,汶川震后表现为剪切变形速率的增强,而垂直于主破裂带的运动分量则对汶川地震响应不明显;震中周边GPS基线变形速率表明,基线伸缩变化率总体呈现NW向拉张、NE向压缩状态,且拉张量明显小于压缩量.上述地壳变形动态特征表明西秦岭北缘断裂及其附近地区的应变积累水平和断层闭锁程度可能处于较高水平,在岷县漳县地震前该区表现出局部“硬化”迹象.     

甘肃岷县漳县M_S6.6地震序列波速比变化特征研究

收集了甘肃岷县漳县MS6.6地震序列固定台站和震后6个流动台站震相观测报告,提取了P波、S波走时信息,采用多台和达法计算该地震序列波速比,发现震后较强余震发生前波速比趋势性下降的特征。这对后续震情跟踪和趋势判定过程中强余震预测有一定的参考价值和指示意义。     

Vertical velocity distributions through and above submerged,flexible vegetation

Abstract

A one-dimensional steady-state model was constructed and used to study vertical profiles of longitudinalvelocities in open channel flows through, and above, submerged vegetation. The eddy viscosity was evaluated by using the analogue of the mixing length theory. The model of water velocity profiles takes into account the surface roughness of the channel bottom and the drag exerted by submerged flexible stems. The verification of the calculated velocity profiles was carried out based on data obtained in laboratory experiments. The proportionality coefficients for the analogue of the mixing length formulae in both layers—within homogenous flexible stems and above them—were determined.     

Laboratory experiments of sediment transport from bare soil with a rill

Abstract

Mathematical models developed for quantification of sediment transport in hydrological watersheds require data collected through field or laboratory experiments, but these are still very rare in the literature. This study aims to collect such data at the laboratory scale. To this end, a rainfall simulator equipped with nozzles to spray rainfall was constructed, together with an erosion flume that can be given longitudinal and lateral slopes. Eighty experiments were performed, considering microtopographical features by pre-forming a rill on the soil surface before the start of each experiment. Medium and fine sands were used as soil, and four rainfall intensities (45, 65, 85 and 105 mm h^-1) were applied in the experiments. Rainfall characteristics such as uniformity, granulometry, drop velocity and kinetic energy were evaluated; flow and sediment discharge data were collected and analysed. The analysis shows that the sediment transport rate is directly proportional to rainfall intensity and slope. In contrast, the volumetric sediment concentration stays constant and does not change with rainfall intensity unless the slope changes. These conclusions are restricted to the conditions of experiments performed under rainfall intensities between and 105 mm h^-1 for medium and fine sands in a 136-cm-wide, 650-cm-long and 17-cm-deep erosion flume with longitudinal and lateral slopes varying between 5 and 20%.

Editor Z.W. Kundzewicz; Associate editor G. Mahé

Citation Aksoy, H., Unal, N.E., Cokgor, S., Gedikli, A., Yoon, J., Koca, K., Inci, S.B., Eris, E., and Pak, G., 2013. Laboratory experiments of sediment transport from bare soil with a rill. Hydrological Sciences Journal, 58 (7), 1505–1518.