Wedge impact with the influence of ice

This work presents a canonical study on a wedge entering water near a single piece of ice using computational-fluid-dynamics (CFD) and a Wagner-type theoretical model with corrections for non-linear effects. Calculations for a series of conditions with ice of different sizes and locations relative to the wedge are conducted. The hydrodynamic force due to impact, the pressure distribution on the wedge surface, and the pile-up phenomenon are examined to study the role of ice in the impact process. The theoretical model is shown to be accurate and can serve as a useful method to assess slamming loads under the influence of ice. It is shown that even for the case of a small piece of ice, the slamming force on the wedge can increase by 30%.     

Adaptation of the vertical resolution in the mixed layer for HYCOM

This paper focuses on the dynamics of the mixed layer. When the mixed layer depth increases, the vertical discretisation eventually becomes too sparse at the bottom of this layer to accurately resolve its evolution and strong numerical errors can appear. This is linked to the fact that the vertical resolution is concentrated in the upper part of the ocean and does not adapt to the deepening of the mixed layer.Knowing that the HYbrid Coordinate Ocean Model (HYCOM) is able to modify the distribution of the vertical levels, we suggest in this paper a method to adapt the resolution to the mixed layer extension. This method is tested in 1-D configurations for two academic atmospheric forcing conditions (strong convection and wind-mixing) and a realistic forcing extending over one year, with seasonal restratification following strong winter convection. The new method improves the results in all cases, and in particular when the mixed layer reaches deep layers.     

利用GPU实现基于物理模型的流体运动仿真

纳维-斯托克斯方程是描述流体运动的基础物理模型。首先简要介绍了在计算机上实现该模型的数值解算方法。在流体运动的计算机视觉仿真中,密度渲染才是最终结果,因此,又阐述了流体的密度场与速度场的关系,并且给出了流体仿真的基本流程。由于可编程图形处理器(GPU)具有并行性和速度快等特点,流体模拟的解算和渲染在图形处理器上运行更加高效,但是利用GPU编程实现流体仿真必须要实现3个核心转换,最后以支持3维纹理的Direct3D10为例,给出了利用GPU实现流体运动仿真两个简单实例。     

西湖凹陷中南部油气成藏动力学特征及成藏机理

西湖凹陷以始新世末的玉泉运动和中新世末的龙井运动形成的不整合面为界,将盆地的发展演化分为裂陷、坳陷和区域沉降三个阶段。在盆地演化的不同阶段,不同构造带的沉降速率存在差异,烃源岩的热成熟演化史也不一致。生、排烃史模拟表明：平湖组烃源岩的生烃强度最高,花港组烃源岩的生烃强度相对较小;中央背斜带及其两侧深凹部位烃源岩的生烃强度大于保斜坡带;主要应用Basin Mod盆地模拟软件系统,通过对流体势、温压系统、异常压力的分析,探讨西湖凹陷中南部油气运聚成藏的机理。     

江苏吕四海岸沉积动力特征及侵蚀过程

海岸侵蚀与水动力之间有着密切的关系.基于现场调查和资料收集,探讨了吕四海岸地貌、水动力、泥沙运动以及沉积与动力之间的响应.研究结果表明,风浪和潮流是塑造吕四海岸的主要动力.风浪年内变化按向岸风频率可分为高频期(10 月至翌年 1月)、转频期(2 月、3 月和 9 月)和低频期(4～8月)三个时期.风浪高频期,潮滩冲蚀,物质粗化;低频期,潮滩淤积,物质细化;转频期,时冲时淤,动态稳定.潮流作用主要表现为输沙淤滩和侧蚀滩脚.在风浪高频期,滩脚同时受到风浪冲蚀和潮流侧蚀,向岸后退,使吕四岸段成为隐性侵蚀型海岸.岸滩塑造对沉积动力响应显著,东部处于滨岸环境,在潮流和风浪的作用下,沉积物由岸向海变粗;西部还受径流影响,处于滨岸-河口环境,物质由岸向海变细.在水动力要素中,风浪是导致岸滩侵蚀的主控动力,而潮流则是近岸泥沙进行滩槽滩槽交换和循环输运的输运动力.     

Hydrodynamic and dynamic analysis to determine the directional stability of an underwater vehicle near a free surface

A theoretical methodology to determine the open-loop directional stability of a near-surface underwater vehicle is presented. It involves a solution of coupled sway and yaw equations of motion in a manner similar to that carried out for surface ships. The stability derivatives are obtained numerically through simulation of motions corresponding to planar motion mechanism (PMM) model tests. For the numerical simulation, a boundary-integral method based on the mixed Lagrangian-Eulerian formulation is developed. The free-surface effect on the vehicle stability is determined by comparing the results with that obtained for vehicle motion in infinite fluid. The methodology was used to determine the stability of the Florida Atlantic University’s Ocean EXplorer (OEX) AUV. The presence of the free surface, through radiation damping, is found to suppress unsteady oscillations and thereby enhance the directional stability of the vehicle. With effects of free surface, forward speed, location and geometry of rudders, location of the center of gravity etc. all being significant factors affecting stability, a general conclusion cannot be drawn on their combined effect on the vehicle stability. The present computational methodology is therefore a useful tool to determine an underwater vehicle’s stability for a given configuration and thus the viability of an intended mission a priori.     

冲绳海槽热液柱动力过程的数值模拟

本文以冲绳海槽伊平屋北部热液区(126o53.80′,27o45.50′)的现场水文数据作为背景条件,使用k-ε湍流模型模拟热液柱的动力过程。模拟计算得到的羽流速度、温度和湍流耗散率等基本物理量展现了热液柱的时空演化过程。模拟结果显示,羽流最大上升高度及中性浮力面高度与海底的距离分别为83.62m和68.97m,和2014年先导专项在此附近热液区所观测的温度异常和盐度异常的深度位置(离海底约66—86m)接近。羽流的上升速度满足高斯分布,其半径b与距喷口高度z-H成正比:b=0.0985(z-H),其中z为距海底高度,H为热液烟囱体的高度。羽流的最大体积通量比喷口的初始值增加了878倍,达1.034m~3/s;在中性浮力面位置附近,动量通量达到最大值,为0.156m~4/s~2,比初始值增加了882倍;浮力通量在中性浮力面以下和BM2000(Bloomfield et al,2000)理论模型符合良好,在中性浮力面以上则呈现随高度先增加后减小的特征。本文计算得到的平均卷挟率为α≈0.0807,与背景流较弱的热液区的声学现场观测结果相符。     

Numerical simulation of water flooding into a damaged vessel’s compartment by the volume of fluid method

When a vessel is damaged, seawater floods into the damaged compartments and subsequently influences the motion of the vessel. Furthermore, the vessel’s behaviour affects the floodwater motion. In this paper, a Navier-Stokes (NS) solver with a free surface capturing technique, i.e., the volume of fluid (VOF) method, was developed to numerically simulate water flooding into a damaged vessel. To verify the developed solver, a 2-D and a 3-D dam break problems were tested. The numerical results coincide well with the experimental results and with the published numerical results. Additionally, it was used to solve the problems of linear and non-linear liquid sloshing in a hexahedral tank. The numerical results are satisfactory in comparison with the experimental results and analytical solutions. Finally, the phenomenon of water flooding into a damaged compartment of a Ro-Ro ferry was simulated numerically. The computed results are in good agreement with the experimental data.     

银纳米杆高温熔化断裂弛豫性能的原子级模拟研究

采用分子动力学模拟方法,研究了不同长度银纳米杆在不同温度弛豫过程中的结构演变过程.结果表明:银纳米杆存在一与杆长相关的临界熔断温度,该临界熔断温度随杆长增加而显著降低.当温度大于熔点而小于临界熔断温度时,体系形成一个高度无序的球形团簇,而温度大于临界熔断温度时,体系则熔断成两个球形团簇.并给出了银纳米杆的产生该熔断现象的机理.