The stability and compressibility of MgAl2O4 high-pressure polymorphs

High-pressure and high-temperature experiments using a laser-heated diamond anvil cell (LHDAC) and synchrotron X-ray diffraction have revealed a phase transition in MgAl₂O₄. CaTi₂O₄-type MgAl₂O₄ was found to be stable at pressures between 45 and at least 117 GPa. The transition pressure of CaTi₂O₄-type phase in MgAl₂O₄ is much lower than that in the natural N-type mid-oceanic ridge basalt composition. The Birch–Murnaghan equation of state for CaTi₂O₄-type MgAl₂O₄ was determined from the experimental unit cell parameters with K ₀=219(±6) GPa, K ₀′=4(constrained value), and V ₀=238.9(±9) ų. The observed compressibility was in agreement with the theoretical compressibility calculated in a previous study. ε-MgAl₂O₄ was observed at pressures between 40 and 45 GPa, which has not been reported in natural rock compositions. The gradient (dP/dT slope) of the transition from the ε-type to CaTi₂O₄-type MgAl₂O₄ had a positive value. These results should resolve the dispute regarding the stable high-pressure phase of MgAl₂O₄, which has been reported in earlier studies using both the multi-anvil press and the diamond anvil cell.     

浅议成矿预测的有关问题：—以湖南原生金刚石矿预测为例

本文简要的介绍了成矿预测的概念、理论、准则及信息系统,以金刚石矿为例,详述了湖南原生金刚石矿小比例尺成矿预测信息系统,并用累积计分法对湘西北原生金刚石矿进行了预测,划分出长沙—安化Ⅲ级成矿带一个,石门、古丈、怀化—会同成矿区三个。     

A technique for identifying structural domain boundaries at the EKATI Diamond Mine

Over 10,000 discontinuity orientations from various sources at the EKATI Diamond Mine in northern Canada were collected and amalgamated into a common database. A new technique in which structural domains were determined in the area of three closely spaced active pits by quantitatively comparing stereonets from different regions was developed. The frequencies of discontinuity poles plotting in orientation windows on stereonets were determined and compared using a correlation coefficient to quantify the degree of similarity between different stereonets. Structural boundaries between regions were established wherever their associated stereonets display low correlation coefficients. The technique was able to determine boundaries in the vertical direction as well as radially in a number of pie-shaped zones extending around the kimberlite pipes.     

Peridotitic diamonds from Namibia: constraints on the composition and evolution of their mantle source

About half the diamonds studied from the Cenozoic placer deposits along the Namibian coast belong to the peridotitic suite. The peridotitic mantle source is heterogeneous ranging from lherzolitic to strongly Ca depleted (down to 0.24 wt.% CaO in garnet) and shows large variations in Cr/Al ratio, illustrated by very low to very high Cr₂O₃ contents in garnet (2.6–17.3 wt.%). The Cr-rich end of this range includes exceptionally high Cr₂O₃ contents in Mg-chromite (70.7 wt.%) and clinopyroxene (3.6 wt.%). Garnet-olivine thermometry appears to indicate two groups, one that equilibrated at temperatures between 1200 and 1220°C and a second between 960 and 1100°C. Combined estimates of pressure and temperature based on garnet-orthopyroxene pairs indicate a large variance in geothermal gradients, corresponding to 38–42 mW/m² surface heat flow.

The trace-element composition of peridotitic garnet inclusions (determined by SIMS) also indicates large diversity. Two principal groups, corresponding to different styles of metasomatic source enrichment, are recognized. The first group ranges from extremely LREE_N-depleted patterns, through trough-shaped REE_N to sinusoidal patterns with the position of the first peak gradually moving from the LREE_N to the MREE_N. This series of REE patterns is interpreted to reflect a range of metasomatic agents with decreasing LREE/HREE. Only in the case of the two garnets with REE_N peaking at Sm–Eu is this process connected with enrichment in Zr, without significant introduction of Y and Ti. The metasomatism responsible is interpreted as reflecting percolation of CHO-fluids through harzburgite under sub-solidus conditions. A second group of garnets shows an increase from LREE_N–MREE_N and almost flat (lherzolitic garnet) to moderately declining MREE_N–HREE_N at super-chondritic levels. This second style of metasomatism is caused by an agent carrying HFSE and showing only moderate enrichment in LREE over HREE, which points towards silicate melts.     

Constraining diamond metasomatic growth using C- and N-stable isotopes: examples from Namibia

The present paper provides C- and N-stable isotope characteristics, N-contents and N-aggregation states for alluvial diamonds of known paragenesis from placers along the Namibian coast. The sample set includes diamonds with typical peridotitic and eclogitic inclusions and the recently reported “undetermined” suite of Leost et al. [Contrib. Mineral. Petrol. 145 (2003) 15] which resulted from infiltration of high temperature, carbonate-rich melts. δ¹³C-values range from −20.3‰ to −0.5‰ (n=48) for peridotitic diamonds and from −38.5‰ to −1.6‰ (n=45) for eclogitic diamonds. Diamonds belonging to the “undetermined” suite span a narrower range in δ¹³C from −8.5‰ to −2.7‰ (n=13). When compared with previous studies, diamonds from Namibia are characterised by unusually low proportions of N-free (i.e. Type II) peridotitic and eclogitic diamonds (3% and 2%, respectively) and an unprecedented high proportion of N-rich diamonds (15% and 73%, respectively, have N-contents >600 ppm). δ¹⁵N-values for diamonds of the peridotitic, eclogitic and “undetermined” suites range from −10‰ to +13‰ without correlations with either N-content or δ¹³C. The similarity in N-isotopic composition and the N-rich character of diamonds belonging to the eclogitic, peridotitic and “undetermined” suites is striking and suggests a close genetic relationship. We propose that a large part of the diamonds mined in Namibia formed during metasomatic events of similar style that introduced carbon and nitrogen into a range of different host lithologies.     

Underground geotechnical and geological investigations at Ekati Mine–Koala North: case study

Since 1998, BHP Billiton has mined diamonds at the Ekati Diamond Mine™ near Lac de Gras in the Northwest Territories of Canada. Current operations are based on mining multiple pipes by the open-pit method, but as some pits deepen, converting to underground mining is being considered.

As a test of underground mining methods and to provide access to the lower elevations of the Panda and Koala pipes, the Koala North pipe is being developed for underground mining. Initially, the top 40 m of the pipe were mined as an open pit to provide grade information and a prepared surface for the transition to underground mining. Currently, Koala North is being developed as an open-benching, mechanized, trackless operation. Although the method was successfully used at several De Beers diamond operations in South Africa, it has never been tested in an Arctic environment.

This case study describes basic geology, mining method layout and ongoing geological and geotechnical investigation. From the beginning of underground development, geotechnical daily routines have been fully integrated within the technical services department, which supports the operation. Geotechnical, geological and structural information obtained from underground mapping and core logging is compiled, processed, reviewed and analyzed on site by the geotechnical staff. Conclusions and recommendations are implemented as part of the operations in a timely manner. This ongoing “live” process enables the operators to make the most efficient use of resources both for ground support and excavations as well as to address safety issues, which are the top priority.     

The relationship between the distribution of nitrogen impurity centres in diamond crystals and their internal structure and mechanism of growth

Fifty diamond crystals of different morphological types (octahedra, dodecahedroids, cubes and single tetrahexahedroid) with differing internal structures were examined using methods of cathodoluminescence (CL), anomalous birefringence and local infrared (IR) analysis. The main objective of the study was to examine the regularities of nitrogen impurity distribution in diamond with differing internal structures. Almost all the analyzed octahedra, as well as dodecahedroids with zonal structures and the blocky dodecahedroids, are characterized either by nearly isothermic growth conditions or by a decrease in formation temperature during the crystallization process. In contrast to zoned octahedra and dodecahedroids, dodecahedroids with zonal–sectorial and sectorial internal structures show a notably different distribution of nitrogen defects, with N_tot generally decreasing from crystal cores to marginal areas, and degree of nitrogen aggregation increasing in the same direction. From this, it would follow that in these crystals, the temperature of diamond formation of the outer crystal zones is approximately 40–50 °C higher than that of the inner zones. The same result (15 to 80 °C) was obtained for diamond crystals with cubic habit, which generally show a fibrous internal structure, reflecting normal mechanisms of growth. The anomalous distribution of nitrogen centres in diamond crystals that grew through the normal mechanism, with a high rate of growth and in an oversaturated medium, might point to non-equilibrium relationships between the concentrations of different nitrogen centres. It is likely that in crystals of this type, the rate of growth is higher than the rate of structural nitrogen aggregation. Thus, it appears that in these peculiar crystals of diamond we deal with non-equilibrium concentrations of nitrogen B centres and, consequently, with anomalous, non-actual diamond formation temperatures.     

Role of geology in diamond project development

For a mining operation to be successful, it is important to bring fundamental and applied science together. The mining engineer needs to understand the importance of geology, mineralogy and petrography, and how projects can benefit from the data collected during the exploration and pre-exploration stage. Geological scientists also need to understand the process of project development from the exploration stage through mine design and operation to mine closure. Kimberlite pipe or dyke emplacement, geology and petrology/mineralogy are three areas that illustrate how information obtained from the geological studies could directly influence the mining method selection and the project strategy and design. Kimberlite emplacement is one of the fundamental processes that rely on knowledge of the kimberlite body geology. Although the importance of the emplacement model is commonly recognized in the resource geology, mining engineers do not always appreciate its importance to the mine design. The knowledge of the orebody geometry, character of the contact zones, internal structures and distribution of inclusions could directly influence pit wall stability (thus strip ratio), underground mining method selection, dilution, treatability, and the dewatering strategy. Understanding the internal kimberlite geology mainly includes the geometry and character of individual phases, and the orientation and character of internal structures that transect the rock mass. For any mining method it is important to know “where the less and where the more competent rocks are located” to achieve stability. On the other hand, the detailed facies studies may not be important for the resource and mine design if the rock types have similar physical properties and diamond content. A good understanding of the kimberlite petrology and mineralogy could be crucial not only to the treatability (namely diamond damage and liberation), but also to the pit wall and underground excavation stability, support design, mine safety (mudrush risk assessment) and mine dewatering. There is no doubt that a better understanding of the kimberlite and country rock geology has a direct impact on the safety and economics of the mining operations. The process of mine design can start at the beginning of kimberlite discovery by incorporating the critical geological information without necessarily increasing the exploration budget. It is important to appreciate the usefulness of fundamental geological research and its impact on increased confidence in the mine design. Such studies should be viewed as worthwhile investments, not as cost items.     

川滇地区地震活动演化特征分析

结合川滇菱形块体的活动特征，应用图型动力学的损伤演化诱致突变分析方法，研究了川滇地区两条地震带中强地震的损伤演化过程，并给出各地震带演化到破坏态的所有可能的各单元初始状态的组合形式图。研究结果对指导该区地震预测实践有一定的积极作用。     

The Volutionary Characteristics of Seismic Activity in the SichuanYunnan Region,China

Based on the earthquake activity characteristics of the diamond block in the Sichuan-Yunnan region and by using the method of the meso-scope damage dynamics and damage evolution,we studied the damage evolution process for moderately strong earthquakes along two seismicbelts.The original combination patterns of all the units which illuminate the changes from stable state to destroyed state are given.All these patterns can direct the earthquake prediction practice in this region