地质标准物质的回顾与展望

我国地质物料化学成分标准物质的研究始于七十年代的后期.地矿部西北地质研究所等首先研制了超基性岩和铬铁矿标准物质,继后由物化探研究所和岩矿测试研究所牵头,在区域化探全国扫面的推动下,先后研制了水系沉积物、土壤和岩石三个系列标准物质.稍后核工业部、冶金部和化工部也着手研制了相应专业的地质标准物质.八十年代是地质标准物质研制的全盛时期,在这个阶段之后地质标准物质基本上形成了比较完整的体系.根据1992年国家技术监督局公布的国家一级标准物质目录^[1],在样品数量上冶金类标准物质居第一位,地质类标准物质居第二位,约占四分之一;依发布的标准值项目数计^[2],地质类标准物质居于首位,占50%以上.我国地质标准物质与外国相比,在数量、品种类型和系列性方面均占世界领先地位,在定值的元素和定值精度方面亦为国际先进水平.     

电感耦合等离子体发射光谱法测定铀矿石尾渣标准物质中9种痕量元素

样品经ＨＦ－ＨＮＯ３－ＨＣｌＯ４分解，在２ｍｏｌ／ＬＨＮＯ３介质中，采用感耦等离子体光电直读光谱法对铀矿石尾标准物质中的Ａｓ、Ｂａ、Ｂｅ、Ｃｄ、Ｃｒ、Ｎｉ、Ｐｂ等和Ｓｎ进行定值分析。同一样品平行测定６次，其各元素的相对标准偏差在２％－１０％。分析结果均落在标准值的置信区间。     

成矿组分沉积同生富集的一种新机制:动态海水团的混合过程

海洋可以被分成若干特征各异的、运动着的海水团，各种海洋现象就源于海水团的运动和相互作用。分隔不同海水团的前锋面上的混合作用是促使成矿组分发生沉淀富集的地球化学障。在海水团前锋混合带上，成矿组分在沉积物中产生同生富集，结果生成沉积矿床或矿源层。这是一种在时间上广泛发生但又尚未被人们所认识的崭新机制。     

无机增强纤维Ⅰ.钛酸钾纤维

结晶质的钛酸钾纤维因其性质特殊而备受青睐，本文介绍了二钛酸钾、四钛酸钾、六钛酸钾和八钛酸钾纤维的结构、性质、用途，及国内外的研究现状．     

广西五圩矿田多金属矿床的成矿特征及物质来源

五圩矿田各多金属矿床均为中—低温热液充填型脉状矿床。研究结果表明，成矿流体是一种低盐度富含ＣＯ＿２的中－低温热液，其物质来源并非单一。其中，热液主要来自动热变质水，有部分岩浆热液掺合；主要成矿元素（Ｐｂ，Ｚｎ，Ｓｂ，Ａｓ等）由赋矿地层提供；硫具混源特征。成矿时存在一个统一热力场，而且成矿作用以“脉动式”充填方式为主，因而，矿田内围绕矿化中心（热源），出现明显的矿床水平分带现象和多阶段矿化特点。     

Long-term erosion on granitic roadcuts based on exposed tree roots

Exposed roots were used to estimate soil and bedrock erosion on the cut slopes of a 45-year-old road constructed in granitic soils of the Idaho Batholith. The original roadcut surface was defined by projecting a straight line from the toe of the cut past the end of the exposed root to the intersection of a straight line projected along the surface of the hillslope. A cross-sectioning technique was then used to determine erosion to the present roadcut surface. A total of 41 exposed root sites were used to estimate erosion on a 1350 m-long section of road. Average erosion was 1·0 and 1·1 cm/year for soil and bedrock respectively. Buttressing by tree roots caused lower erosion rates for soil as compared to bedrock. Both soil and bedrock erosion rates showed statistically significant correlations with the gradients of the original cut slope. The bedrock erosion data provide a reasonable estimate of the disintegration rate of exposed granitic bedrock exhibiting the weathering and fracturing properties common to this area. The road is located in a study watershed where long-term sediment yield data are available. Sediment data from adjacent study watersheds with no roads were compared to sediment data from the roaded watershed to estimate the long-term increase in sediment yield caused by the road. The increase amounts to about 2·4 m³/year. This figure, compared to the average annual on-site road erosion, provides an erosion to sediment delivery ratio of less than 10 per cent. Based on study results, road construction and maintenance practices are suggested for helping reduce roadcut erosion.     

Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks

Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional (2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution, crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software. The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of rocks under external loading.     

对山西应县木塔采用纳米复合纤维加固的建议

山西应县木塔是古人留给我们的稀世珍宝，如何妥善地保护好这一珍贵的遗产，使之在加固时尽量保持原有的风貌，是一项复杂而艰巨的任务。根据长期的研究成果和实际工作的经验，提出了用纳米复合纤维加固应县木塔的建议，介绍了纳米复合纤维材料的特点，分析讨论了加固时的一些具体技术问题。     

Health Risks and Environmental Inequity: A Geographical Analysis of Accidental Releases of Hazardous Materials

This study examines the spatial distribution and impact of nonroutine accidental releases of hazardous materials relative to the demographic composition of residents in nearby communities. First, atmospheric dispersion modeling methods are used to delineate the impact zones of worst‐case accidents in two New York counties over the last ten years. Next, using accidental reports for 1997, GIS and statistical operations are used at the census tract level of the two counties to determine whether these incidents disproportionately affected disadvantaged neighborhoods. The results suggest that the areas of high‐impact from accidental releases of hazardous materials are best characterized by a large proportion of families below the poverty line, Hispanics, and other minorities.     

贵池铜山铜矿床成因探讨

铜山铜矿床矿化类型可划分为层状含铜黄铁矿型，含铜角砾岩型，含铜夕卡岩型和含铜班岩型，控矿因素为地层，岩浆岩及构造，其中层间断裂与接触带构造是主要的容矿构造，铅，硫，氢，氧同位素特征及成矿温度研究表明矿物质和热液主要来源于铜山岩体，矿床成因为层控夕卡岩型铜矿床。