Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.     

Some considerations concerning seismic geomorphology and paleoseismology

Seismic geomorphology studies landforms which developed in connection with earthquakes. Among them, two different end members may be distinguished: 1) seismo-tectonic landforms, including surface faults and fractures, land uplift and subsidence at different scales, surface bulges, elongate ridges, and any other permanent ground deformations directly related to tectonic stress, and 2) seismo-gravitational landforms, such as landslides, deep-seated gravitational slope deformations, sinkholes, and fissures due to sediment compaction or liquefaction and sand blows, connected with both seismic shaking and gravitational stress.A clear-cut distinction between the two categories of landforms is not always easy to make (and in many instances not really useful), while there are, in many cases, ground effects that might be (and should be) considered as simultaneous combinations of seismo-tectonic and seismo-gravitational processes. This applies especially to surface fracturing and faulting which could be the combined result of tectonic stress, stress produced by seismic shaking, and gravitational stress.The objective of this paper is to review selected case histories mainly from Italy and the Mediterranean region, in order to show the importance of a comprehensive study of earthquake-generated landforms for understanding the seismicity level of the area under investigation. We argue that in earthquake prone areas, seismic landforms often constitute typical patterns (seismic landscapes) whose recognition, mapping and paleoseismological analysis may help in the evaluation of seismic hazards.     

Analysis of the environmental sensitivities of a typical dynamic epikarst system at the Nongla monitoring site, Guangxi, China

Nongla, a typical karst dynamic system (KDS) monitoring site, is located at Nongla Village, Mashan County, Guangxi, China. The data from a Greenspan CTDP300 multichannel data logger indicates that the KDS is highly sensitive to environmental changes. Multi-day and diurnal physico-chemical composition of epikarst spring water is quite different under different climatic conditions. During a day with no rainfall, water temperature and air temperature have similar variations. Electrical conductivity (EC) has good positive correlation with pH value and water temperature. During rainstorms, the physico-chemical composition of the spring water is initially strongly effected by dilution, pH and EC drop rapidly. However, half to one hour later, EC returns to normal and the CO₂ effects will be the dominant physical effect. This is due to the high fissure rates and high permeability in the epikarst zone. Dilution effects were observed during the entire rainstorm event,whereas, it only acts during the earliest period of light rain. Therefore, it is necessary to examine the water–rock–CO₂ combination as a whole system to explain the hydrochemical behavior of epikarst processes.     

A multiphase approach for evaluating the horizontal and rocking impedances of pile group foundations

This paper advocates the use of a multiphase model, already developed for static or quasi‐static geotechnical engineering problems, for simulating the behaviour of piled raft foundations subject to horizontal as well as rocking dynamic solicitations. It is shown that such a model, implemented in a FEM code, yields appropriate predictions for the foundation impedance characteristics, provided that shear and bending effects in the piles are taken into account, thus corroborating the findings of the asymptotic homogenization theory. Besides, it is notably pointed out that such a multiphase‐based computational tool makes it possible to assess the dynamic behaviour of pile groups in a much quicker way than when using direct numerical simulations, which may face oversized problems when large pile groups are concerned. Copyright © 2016 John Wiley & Sons, Ltd.     

A new bounding surface model for thermal cyclic behaviour

To accurately predict soil volume changes under thermal cycles is of great importance for analysing the performance of many earth structures such as the energy pile and energy storage system. Most of the existing thermo‐mechanical models focus on soil behaviour under monotonic thermal loading only, and they are not able to capture soil volume changes under thermal cycles. In this study, a constitutive model is proposed to simulate volume changes of saturated soil subjected to cyclic heating and cooling. Two surfaces are defined and used: a bounding surface and a memory surface. The bounding surface and memory surface are mainly controlled by the preconsolidation pressure (a function of plastic volumetric strain) and the maximum stress experienced by the soil, respectively. Under thermal cycles, the distance of the two surfaces and plastic modulus increase with an accumulation of plastic strain. By adopting the double surface concept, a new elastoplastic model is derived from an existing single bounding surface thermo‐mechanical model. Comparisons between model predictions and experimental results reveal that the proposed model is able to capture soil volume changes under thermal cycles well. The plastic strain accumulates under thermal cycles, but at a decreasing rate, until stabilization. Copyright © 2017 John Wiley & Sons, Ltd.     

试析GIS技术在房产测绘中的作用

以GIS技术在房产测绘中的作用探索研究为题展开论述。首先,介绍了GIS技术操作简单、工作效率高、功能全面,可以实现全天候工作的优势特点。然后,结合测绘行业方面的相关经验,提出该技术在房产测绘中的作用。最后,对GIS技术的改进做了简单分析。希望可以提高GIS技术在房产测绘中的工作效率,促进我国房产事业的长期、稳定发展。     

Use of an inside buffer method to extract the extent of urban areas from DMSP/OLS nighttime light data in North China

Defense Meteorological Satellite Program (DMSP)/Operational Linescan System (OLS) nighttime imagery provides a valuable data source for mapping urban areas. However, the spatial extents of large cities are often overestimated because of the effect of over-glow from nighttime light if a fixed thresholding technique is used. In the work reported here, an inside buffer method was developed to solve this issue. The method is based on the fact that the area overestimated is proportional to the extent of the lit area if a fixed threshold is used to extract urban areas in a region/county. Using this method, the extents of urban areas in North China were extracted and validated by interpretations from Landsat Thematic Mapper images. The results showed that the lit areas had a significant linear relationship with the urban areas for 120 representative cities in North China in 2000, with an R² value of over 0.95. This demonstrates that the inside buffer method can be used to extract urban areas. The validation results showed that the inside buffer model developed in 2000 can be directly used to extract the extent of urban areas using more recent nighttime light imagery. This is of great value for the timely updating of urban area databases in large regions or countries.     

2001年秋季风对坦帕湾盐度平衡的影响

利用三维高分辨率有限体积的近海海域模型FVCOM来分析2001年秋季期间风作用对坦帕湾区域盐度平衡的影响。为了区分风的影响,分别设计了两个实验：一个由潮汐和河流作为驱动,另一个由潮汐、河流以及风场共同驱动。结论如下：首先,风作用会使盐度产生变化,能够明显地使坦帕湾内的盐度增加,并导致水平和垂直方向上盐度梯度的减少;随后,本文分析了坦帕湾区域内的盐度平衡,主要的盐度平衡来自于全部（水平和垂直方向上）平流的盐度流量分歧以及除去海峡底部的垂直方向上盐度流量分歧;最后,对由风引起的盐度变化进一步进行分析,结果表明风作用不能改变盐度平衡地位的相对重要性,由风引起的盐度平衡改变高度依靠于特殊的地形,除此之外,全部平流盐度流量分歧和垂直散布盐度通量分歧能够抵消,并且两者都远大于水平散步盐度流量分歧。     

淤泥质潮滩地貌演变中的水动力及生物过程研究进展

淤泥质潮滩对于海岸防护、增加土地资源、保持生物多样性等具有重要作用。从淤泥质潮滩演变的主要驱动因子——潮流、波浪、生物作用及地下过程四个方面回顾和总结了潮滩演变动力地貌过程的相关研究进展,提出应关注潮滩短期演变规律、波浪与浮泥作用机理、生物生长与潮滩演变定量关系,以及地下过程作用机理等。     

中国省际人口迁移的多边效应机制分析

区际人口迁移不仅与迁出地和目的地的要素特征以及距离有关,而且还受到周边迁移流的影响.基于网络自相关理论,利用"六普"省际人口迁移数据和相关统计资料,在重力模型的基础上考虑迁移流之间可能存在的几种空间依赖形式,构建中国省际迁移流的空间OD模型,初步揭示区域经济社会等因素及其空间溢出效应对省际人口迁移的影响,并就区域要素变化对整个省际人口迁移系统产生的"连锁反应"进行了模拟.结果表明:① 中国省际迁移流之间存在显著的网络自相关效应.目的地和迁出地的自相关效应皆为正,导致迁入和迁出流的空间效仿行为;迁出地和目的地周边则出现负的自相关效应,导致迁移流的空间竞争行为;② 区域经济社会等因素通过网络空间关系对周边地区产生的多边溢出效应导致迁移流在空间上集聚.其中,距离衰减效应位居各要素之首,其溢出效应进一步加剧距离的摩擦作用;对目的地而言,区域工资水平和迁移存量超过GDP的影响并产生正的溢出效应,促进周边地区吸引更多的外来人口;对迁出地而言,人口规模和迁移存量产生正的溢出效应,推动周边地区人口外迁;③ 区域要素变化潜在地对整个省际人口迁移系统产生一系列"连锁反应",震荡中心及其周边区域的迁移流波动较大.江苏省GDP增长5%的模拟结果表明,江苏迁往全国其他省份的人口数量都有不同程度地减少,而其他省份入迁人口均有所增加.相对而言,江苏周边省份的迁入或迁出流受到的波动较大,偏远省份波及较小,这是传统的重力模型所无法解释的.