松花江上游地区汞污染的化学生态效应

采样分析了吉林省东部松花江上游金矿开采区及其附近水、土壤、动植物及河流沉积物样品中汞的含量，发现河流沉积物中汞的污染相当严重；受其影响当地的植物和两栖类动物——中国林蛙体内总汞和甲基汞含量也明显高于对照组。实验表明，林蛙内脏对汞的富集能力大于肌肉；秋季对汞的富集大于春季；河流沉积物中甲基汞的含量与林蛙体内甲基汞的含量有较好的正相关。汞污染的来源与区域内个体金矿的滥采滥排有直接关系，表明人类活动所产生的有毒重金属在地表过程中出现了化学生态效应。     

Chemical effects of a near-to-nature detention pond on a small urban headwater

The near-to-nature approach has been established as best practice for stormwater management. However, pollutant mobility within such systems and its impact on small receiving waters are partly unexplained. The study takes place in an urbanised headwater catchment in south-western Germany with an area of 0.4 km². Runoff from roofs, roads, parking lots and gardens is collected in wells or trenches and stored in private and public dry detention basins. Accordingly, this study investigates pollutant input to a detention pond, removal efficiency and the associated effects on the receiving water.Grab samples with high temporal resolution of the receiving water (16 flood events with 315 samples and 41 baseflow samples), the three inflows of the detention basin and its outflow (four flood events with 64 samples) were taken. The outflow of the dry pond is recovered in the hydro- and chemographs of the receiving water. Runoff from roads with increased traffic volume caused the highest PAH inputs and runoff from the residential area showed the highest zinc concentrations, which partly infringe European Environmental Quality Standards. Yearly pollutant inputs (DOC, TSS, PAH, nutrients, metals) from the settlement into the tributary are reduced in the detention pond by up to 80%.     

Urban stormwater thermal gene expression models for protection of sensitive receiving streams

Thermal impact of typical high‐density residential, industrial, and commercial land uses is a major concern for the health of aquatic life in urban watersheds, especially in smaller, cold, and cool‐water streams. This is the first study of its kind that provides simple easy‐to‐use equations, developed using gene expression programming (GEP) that can guide the assessment and the design of urban stormwater management systems to protect thermally sensitive receiving streams. We developed 3 GEP models using data collected during 3 years (2009–2011) from 4 urban catchments; the first GEP model predicts event mean temperature at the inlet of the pond; the second model predicts the stormwater temperature at the outlet of the pond; and the third model predicts the temperature of the stormwater after flowing through a cooling trench and before discharging to the receiving stream. The new models have high correlation coefficients of 0.90–0.94 and low prediction uncertainty of less than 4% of the median value of the predicted runoff temperatures. Sensitivity analysis shows that climatic factors have the highest influence on the thermal enrichment followed by the catchment characteristics and the key design variables of the stormwater pond and the cooling trench. The general method presented here is easily transferable to other regions of the world (but not necessarily the exact equations developed here); also through sensitivity and parametric analysis, we gained insight on the key factors and their relative importance in modelling thermal enrichment of urban stromwater runoff.     

Chemical weathering and CO2 consumption in the glaciated Karuxung River catchment,Tibetan Plateau

Climate factors play critical roles in controlling chemical weathering, while chemically weathered surface material can regulate climate change. To estimate global chemical weathering fluxes and CO₂ balance, it is important to identify the characteristics and driving factors of chemical weathering and CO₂ consumption on the Tibetan Plateau, especially in glaciated catchments. The analysis of the hydro-geochemical data indicated that silicate weathering in this area was inhibited by low temperatures, while carbonate weathering was promoted by the abundant clastic rocks with fresh surfaces produced by glacial action. Carbonate weathering dominated the riverine solute generation (with a contribution of 58%, 51%, and 43% at the QiangYong Glacier (QYG), the WengGuo Hydrological Station (WGHS), and the lake estuary (LE), respectively). The oxidation of pyrite contributed to 35%, 42%, and 30% of the riverine solutes, while silicate weathering contributed to 5%, 6%, and 26% of the riverine solutes at the QYG, WGHS, and LE, respectively. The alluvial deposit of easily weathering fine silicate minerals, the higher air temperature, plant density, and soil thickness at the downstream LE in comparison to upstream and midstream may lead to longer contact time between pore water and mineral materials, thus enhancing the silicate weathering. Because of the involvement of sulfuric acid produced by the oxidation of pyrite, carbonate weathering in the upstream and midstream did not consume atmospheric CO₂, resulting in the high rate of carbonate weathering (73.9 and 75.6 t km⁻² yr⁻¹, respectively, in maximum) and potential net release of CO₂ (with an upper constraint of 35.6 and 35.2 t km⁻² yr⁻¹, respectively) at the QYG and WGHS. The above results indicate the potential of the glaciated area of the Tibetan Plateau with pyrite deposits being a substantial natural carbon source, which deserves further investigation.     

A numerical study of mechanical behavior of a cement paste under mechanical loading and chemical leaching

Based on relevant experimental data of a petroleum cement paste under mechanical loading and chemical leaching, an elastic‐plastic model is first proposed by taking into account plastic shearing and pore collapse. The degradation of mechanical properties induced by the chemical leaching is characterized by a chemical damage variable which is defined as the increase of porosity. Both elastic and plastic properties of the cement paste are affected by the chemical damage. The proposed model is calibrated from and applied to describe mechanical responses in triaxial compression tests respectively on sound and fully leached samples. In the second part, a phenomenological chemical model is defined to establish the relationship between porosity change and calcium dissolution process. The dissolution kinetics is governed by a diffusion law taking into account the variation of diffusion coefficient with calcium concentration. The chemical model is coupled with the mechanical model, and both are applied to describe mechanical response of cement paste samples subjected to progressive chemical leaching and compressive stresses. Comparisons between experimental data and numerical results are presented.     

Using monazite and zircon petrochronology to constrain the P–T–t evolution of the middle crust in the Bhutan Himalaya

The growth and dissolution behaviour of accessory phases (and especially those of geochronological interest) in metamorphosed pelites depends on, among others, the bulk composition, the prograde metamorphic evolution and the cooling path. Monazite and zircon are arguably the most commonly used geochronometers for dating felsic metamorphic rocks, yet crystal growth mechanisms as a function of rock composition, pressure and temperature are still incompletely understood. Ages of different growth zones in zircon and monazite in a garnet‐bearing anatectic metapelite from the Greater Himalayan Sequence in NW Bhutan were investigated via a combination of thermodynamic modelling, microtextural data and interpretation of trace‐element chemical ‘fingerprint’ indicators in order to link them to the metamorphic stage at which they crystallized. Differences in the trace‐element composition (HREE, Y, Eu_N/Eu*_N) of different phases were used to track the growth/dissolution of major (e.g. plagioclase, garnet) and accessory phases (e.g. monazite, zircon, xenotime, allanite). Taken together, these data constrain multiple pressure–temperature–time (P–T–t) points from low temperature (<550 °C) to upper amphibolite facies (partial melting, >700 °C) conditions. The results suggest that the metapelite experienced a cryptic early metamorphic stage at c. 38 Ma at <550 °C, ≥0.85 GPa during which plagioclase was probably absent. This was followed by a prolonged high‐T, medium‐pressure (~600 °C, 0.55 GPa) evolution at 35–29 Ma during which the garnet grew, and subsequent partial melting at >690 °C and >18 Ma. Our data confirm that both geochronometers can crystallize independently at different times along the same P–T path and that neither monazite nor zircon necessarily provides timing constraints on ‘peak’ metamorphism. Therefore, collecting monazite and zircon ages as well as major and trace‐element data from major and accessory phases in the same sample is essential for reconstructing the most coherent metamorphic P–T–t evolution and thus for robustly constraining the rates and timescales of metamorphic cycles.     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

Dissolved organic matter in surface runoff in the Loess Plateau of China: The role of rainfall events and land-use

Exploring the chemical characterization of dissolved organic matter (DOM) is important for understanding the fate of laterally transported organic matter in watersheds. We hypothesized that differences in water-extractable organic matter (WEOM) in soils of varying land uses and rainfall events may significantly affect the quality and the quantity of stream DOM. To test our hypotheses, characteristics of rainfall-runoff DOM and WEOM of source materials (topsoil from different land uses and gullies, as well as typical vegetation) were investigated at two adjacent catchments in the Loess Plateau of China, using ultraviolet–visible absorbance and excitation emission matrix fluorescence with parallel factor analysis (PARAFAC). Results indicated that land-use types may significantly affect the chemical composition of soil WEOM, including its aromaticity, molecular weight, and degree of humification. The PARAFAC analysis demonstrated that the soils and stream water were dominated by terrestrial/allochthonous humic-like substances and microbial transformable humic-like fluorophores. Shifts in the fluorescence properties of stream DOM suggested a pronounced change in the relative proportion of allochthonous versus autochthonous material under different rainfall patterns and land uses. For example, high proportions of forestland could provide more allochthonous DOM input. This study highlights the relevance of soils and hydrological dynamics on the composition and fluxes of DOM issuing from watersheds. The composition of DOM in soils was influenced by land-use type. Precipitation patterns influenced the proportion of terrestrial versus microbial origins of DOM in surface runoff. Contributions of allochthonous, terrestrially derived DOM inputs were highest from forested landscapes.