Conceptual hydrodynamic model of the Pamukkale hydrothermal field, southwestern Turkey, based on hydrochemical and isotopic data

The results of study on the hydrochemical and isotope characteristics of shallow and deep waters at Pamukkale hydrothermal field Turkey are described in order to obtain a better understanding of the hydrological circulation. The field can be grouped into two groundwater sub-systems; cold water springs of Ca–HCO₃ type (10–12 °C), and CO₂-rich thermal waters of Ca–HCO₃–SO₄ type (25–58 °C). The occurrence of these water types is closely related to the morphology of the region, where intense tectonism formed horst and graben structures. Hence, two hydrogeological systems were defined: a deep geothermal system which is related to extensive and deep circulation of meteoric water in the regional flow system, and a shallow system which is related to local groundwater flow through sedimentary strata. The meteoric water falling at higher elevations percolates to the local groundwater system at a shallow level and flows to the deep geothermal system. During a deep convection cycle from a recharge to discharge area, the cold water attains heat from the asthenospheric intrusions, causing it to ascend. Variations of chemical and isotopic composition of thermal waters result from their mixing with cool groundwater in a shallow aquifer during their ascent to the surface.

---

Résumé Les résultats d'une étude portant sur les caractéristiques hydrochimiques et isotopiques de puits phréatiques et profonds situés dans le champ hydrothermal de Pamukkale, sont décrits de telle manière à éclairer le fonctionnement des circulations hydrologiques. Le champ peut étre divisé en deux sous-systèmes d'eaux souterraines, l'un avec des eaux de sources froides (10–12 °C) de type Ca–HCO3, et les eaux thermales (25–58 °C) riches en CO₂ et de type Ca–HCO₃–SO4. L'occurrence de ces types d'eaux est fermement liée à la morphologie de la région, oùne tectonique intense a engendré des structures en horsts et en grabens. Dés lors deux systèmes hydrogéologiques ont été définis : un système profond, qui est lié à la circulation extensive et profonde des eaux météoritiques dans le système régional d'écoulement, et un système phréatique lié aux écoulements locaux des eaux souterraines à travers les strates sédimentaires. Les eaux météoritiques aux altitudes élevées, percolent jusqu'aux systèmes locaux phréatiques, puis coulent jusqu'aux systèmes géothermaux plus profonds. Durant le cycle de convection profond des zones de recharge jusqu'aux zones de décharge, l'eau froide atteint les zones chaudes liées aux intrusions athenosphériques, provoquant la remontée. Les variations de la composition chimique et isotopique des eaux thermales résultent dans leurs mélanges avec des eaux souterraines froides dans les aquifères phréatiques durant leur remontée jusqu'à la surface.

---

Resumen Se describen los resultados del estudio de las características isotópicas e hidroquímicas de las aguas someras y profundas para obtener un mejor entendimiento de la circulación hidrológica del campo hidrotermal Pamukkale. El campo puede agruparse en dos sub-sistemas de agua subterránea: manantiales de agua fría del tipo Ca–HCO₃ (10–12°C) y aguas termales ricas en CO₂ del tipo Ca–HCO₃–SO₄(25–58°C). El ambiente de estos tipos de aguas se relaciona estrechamente con la morfología de la región donde el tectonismo intenso ha formado estructuras extensionales tipo graben y horst. Se definieron dos sistemas hidrogeológicos: un sistema geotermal profundo que se relaciona con la circulación profunda y extensa de agua meteórica en el sistema regional de flujo y un sistema somero el cual se relaciona con flujo local de agua subterránea a través de estratos sedimentarios. El agua meteórica que cae en altas elevaciones percola al sistema local de agua subterránea en un nivel somero y fluye hacia el sistema geotermal profundo. Durante un ciclo de convección del área de recarga hacia la zona de descarga, el agua fría se calienta a partir de los intrusivos astenosféricos lo que ocasiona que asciendan. Como resultado de la mezcla de las aguas recalentadas, con agua subterránea fría en un acuífero somero durante el ascenso hacia la superficie, se derivan variaciones en la composición química e isotópica de las aguas termales.

     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

山丘平原过渡区土壤重金属污染特征及评价——以四川省五通桥区为例

采集和分析了五通桥区不同功能区和乡镇73个土壤样品，以了解山丘平原过渡区土壤重金属的含量和污染特征。结果表明，重金属的平均含量为Pb32．18mg／kg、Cd0．82mg／kg、Cu28．61mg／kg、Zn108．08mg／kg、Ni32．66mg／kg、Cr72．44mg／kg；与四川土壤背景值相比，Cu、Ni、Cr的含量与之持平，Pb增加了0．11倍，Zn增加了0．32倍，Cd的积累较为严重，比背景值增加了10倍。污染评价结果显示该过渡区存在一定程度的重金属污染问题，不同功能区的污染程度排序为工业区〉生活区〉农业区。Cd在六种元素的土壤污染分担率中占55．46％，是最主要的污染元素；土壤Cd含量与Pb和Zn存在较高的相关性（相关系数为0．525和0．500），表明存在Pb—Cd和Zn—Cd的复合污染。     

科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

GIS-based flood hazard mapping at different administrative scales: A case study in Gangetic West Bengal, India

This paper addresses the need for an efficient and cost-effective methodology for preparing flood hazard maps in data poor countries, particularly those under a monsoon regime where floods pose a recurrent danger. Taking Gangetic West Bengal, India, as an example and using available historical data from government agencies, the study compiled a regional map indicating hazard prone subregional areas for further detailed investigation, thereby isolating actual high risk localities. Using a GIS (Geographical Information System), a composite hazard index was devised incorporating variables of flood frequency, population density, transportation networks, access to potable water, and availability of high ground and maximum risk zones were mapped accordingly. A digital elevation model derived from high resolution imagery available in the public domain was used to calculate elevated areas suitable for temporary shelter during a flood. Selecting administrative units of analysis at the lowest possible scales – rural development blocks (regional) and revenue villages (subregional) – also ensures that hazard mapping is prepared in line with the existing rural planning and administrative authorities responsible for remedial intervention.     

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

Seaweed floristic studies along tsunami affected Indian coasts: A litmus test scenario after 26th December 2004

On 26th December 2004, the world witnessed the devastating power of tsunami, affecting many countries, bordering the Indian Ocean region. This has caused significant changes in the shallow and intertidal regions of the Indian coast, especially the Andaman and Nicobar Islands, Tamil Nadu, Kerala and Pondicherry. The baseline data on biomass availability and distribution of benthic intertidal seaweed species were collected immediately after this catastrophic event by spot surveying 11 selected localities of the above-mentioned regions. In all, 45 species belonging to 31 genera were recorded during the present survey, the maximum number of seaweed species were recorded at Thirumullavarum, Kerala with the minimum at Car Nicobar, Andaman and Nicobar Islands. A very different trend was observed in the case of biomass availability at some locations which was due to the influence of habitat suitability over the tsunami damage. The details of this study have been provided in the present communication     

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.     

电子地图中多尺度地图数据显示的研究

将计算机三维模型简化中的LOD思想引入到电子地图的组织和显示中,提出了同一比例尺数字地图不同详细程度的分层显示方法和不同比例尺数字地图嵌套显示方法,实现了电子地图的多级缩放。     

泥石流汇流槽可靠度分析

汇流槽是泥石流治理工程中常用的工程措施之一。文章基于汇流槽的倾倒破坏、滑移破坏及地基破坏模式，通过对汇流槽设计影响强烈的岩土参数、几何特征、荷载因素等敏感因子的求解方法及分布特征分析，从汇流槽的抗倾稳定、抗滑稳定和基底应力要求三方面建立极限状态方程。对于每个极限状态方程，在泰勒级数对非线性极限状态方程线性化后，运用一次二阶矩的理论，先假定失效点P^＊，求解出相应的均值和方差。然后根据可靠的定义，得到相应的可靠度指标，通过迭代法求解真正失效点的可靠度指标βi。最后根据3个状态方程相互独立的假定，得出整个结构的可靠度指标β。该方法在平川泥石流防治工程中得到了成功的运用。这对于可靠度设计方法在泥石流防治工程中的运用进行了有益的探讨。