Measurements of Trace Gases in the Inflow of South China Sea Background Air and Outflow of Regional Pollution at Tai O, Southern China

We present a 16-month record of ozone (O₃), carbon monoxide (CO), total reactive nitrogen (NO_y), sulphur dioxide (SO₂), methane (CH₄), C₂ – C₈ non-methane hydrocarbons (NMHCs), C₁ – C₂ halocarbons, and dimethyl sulfide (DMS) measured at a southern China coastal site. The study aimed to establish/update seasonal profiles of chemically active trace gases and pollution tracers in subtropical Asia and to characterize the composition of the `background' atmosphere over the South China Sea (SCS) and of pollution outflow from the industrialized Pearl River Delta (PRD) region and southern China. Most of the measured trace gases of anthropogenic origin exhibited a winter maximum and a summer minimum, while O₃ showed a maximum in autumn which is in contrast to the seasonal behavior of O₃ in rural eastern China and in many mid-latitude remote locations in the western Pacific. The data were segregated into two groups representing the SCS background air and the outflow of regional continental pollution (PRD plus southern China), based on CO mixing ratios and meteorological conditions. NMHCs and halocarbon data were further analyzed to examine the relationships between their variability and atmospheric lifetime and to elucidate the extent of atmospheric processing in the sampled air parcels. The trace gas variability (S) versus lifetime (τ) relationship, defined by the power law, S_lnx = Aτ^{− b}, (where X is the trace gas mixing ratio) gives a fit parameter A of 1.39 and exponent b of 0.42 for SCS air, and A of 2.86 and b of 0.31 for the regional continental air masses. An examination of ln[n-butane]/ln[ethane] versus ln[propane]/ln[ethane] indicates that their relative abundance was dominated by mixing as opposed to photochemistry in both SCS and regional outflow air masses. The very low ratios of ethyne/CO, propane/ethane and toluene/benzene suggest that the SCS air mass has undergone intense atmospheric processing since these gases were released into the atmosphere. Compared to the results from other polluted rural sites and from urban areas, the large values of these species in the outflow of PRD/southern China suggest source(s) emitting higher levels of ethyne, benzene, and toluene, relative to light alkanes. These chemical characteristics could be unique indicators of anthropogenic emissions from southern China.     

从水流挟沙力和河槽形态规律分析黄河调水调沙

在分析水流挟沙力和河槽水力形态规律的基础上，研究调节流量、含沙量和泥沙组成的优化组合，解决河道输沙减淤和河槽相对稳定问题，提出调水调沙方向。达到合理利用水资源和河道减淤与治理相结合的目的．     

Bedform morphology of salmon spawning areas in a large gravel-bed river

While the importance of river channel morphology to salmon spawning habitat is increasingly recognized, quantitative measures of the relationships between channel morphology and habitat use are lacking. Such quantitative measures are necessary as management and regulatory agencies within the Pacific Northwest region of the USA, and elsewhere, seek to quantify potential spawning habitat and develop recovery goals for declining salmon populations. The objective of this study was to determine if fall Chinook salmon (Oncorhynchus tshawytscha) spawning areas in the Snake River, Idaho, USA, were correlated with specific bedform types at the pool–riffle scale. A bedform differencing technique was used to objectively quantify the longitudinal riverbed profile into four distinct pool–riffle units that were independent of discharge. The vertical location of thalweg points within these units was quantified with a riffle proximity index. Chinook salmon spawning areas were mapped and correlated with the pool–riffle units through the use of cross-tabulation tables. The results indicate that 84% of fall Chinook salmon spawning areas were correlated with riffles (χ² = 57.5, df = 3, p < 0.001), with 53% of those areas located on the upstream side of riffle crests. The majority of Snake River fall Chinook salmon spawning occurred at elevations greater than 80% of the difference in elevation between the nearest riffle crest and pool bottom. The analyses of bedform morphology will assist regional fish managers in quantifying existing and potential fall Chinook salmon spawning habitat, and will provide a quantitative framework for evaluating general ecological implications of channel morphology in large gravel-bed rivers.     

Embedding reach-scale fluvial dynamics within the CAESAR cellular automaton landscape evolution model

We introduce a new computational model designed to simulate and investigate reach-scale alluvial dynamics within a landscape evolution model. The model is based on the cellular automaton concept, whereby the continued iteration of a series of local process ‘rules’ governs the behaviour of the entire system. The model is a modified version of the CAESAR landscape evolution model, which applies a suite of physically based rules to simulate the entrainment, transport and deposition of sediments. The CAESAR model has been altered to improve the representation of hydraulic and geomorphic processes in an alluvial environment. In-channel and overbank flow, sediment entrainment and deposition, suspended load and bed load transport, lateral erosion and bank failure have all been represented as local cellular automaton rules. Although these rules are relatively simple and straightforward, their combined and repeatedly iterated effect is such that complex, non-linear geomorphological response can be simulated within the model. Examples of such larger-scale, emergent responses include channel incision and aggradation, terrace formation, channel migration and river meandering, formation of meander cutoffs, and transitions between braided and single-thread channel patterns. In the current study, the model is illustrated on a reach of the River Teifi, near Lampeter, Wales, UK.     

Regional accessibility of land traffic network in the Yangtze River Delta

In a given district, the accessibility of any point should be the synthetically evalua-tion of the internal and external accessibilities. Using MapX component and Delphi, the author presents an information system to calculate and analyze regional accessibility according to the shortest travel time, generating thus a mark diffusing figure. Based on land traffic network, this paper assesses the present and the future regional accessibilities of sixteen major cities in the Yangtze River Delta. The result shows that the regional accessibility of the Yangtze River Delta presents a fan with Shanghai as its core. The top two most accessible cities are Shanghai and Jiaxing, and the bottom two ones are Taizhou (Zhejiang province) and Nantong. With the construction of Sutong Bridge, Hangzhouwan Bridge and Zhoushan Bridge, the re-gional internal accessibility of all cities will be improved. Especially for Shaoxing, Ningbo and Taizhou (Jiangsu province), the regional internal accessibility will be decreased by one hour, and other cities will be shortened by about 25 minutes averagely. As the construction of Yangkou Harbor in Nantong, the regional external accessibility of the harbor cities in Jiangsu province will be speeded up by about one hour.     

闽江河口湿地资源动态变化的分形研究

本研究以分形理论为基础,并借助GIS、RS技术,利用1986年和2002年两期TM遥感影像,提取获得了1986年和2002年闽江河口湿地资源的空间信息,根据分形理论中分形维数和稳定性指数的物理意义,揭示了闽江河口湿地资源动态变化情况。研究表明:闽江河口的湿地类型具有分形结构.并且由于受到较强的人类活动的干预,湿地斑块的形状较为复杂,且稳定性较差。     

澜沧江典型对比流域水力侵蚀快速调查与评价

根据水力侵蚀面蚀和沟蚀两种不同侵蚀形态发生过程尺度空间大小不一的侵蚀特点,确定了研究区面蚀和沟蚀的不同调查评价方法.面蚀的发生过程空间尺度小,选用小区调查方法进行,而沟蚀的发生过程尺度空间大,在典型调查小流域尺度进行全面调查.然后在两种尺度下,分析形成沟蚀和面蚀的影响因素,进行沟蚀程度和面蚀强度分级,并把研究成果展延到澜沧江凤庆河流域和晓街河流域.最后,以在典型调查小流域的研究结果为对照判别依据,判断风庆河和晓街河流域的土壤侵蚀状况.结果显示,澜沧江典型流域的面蚀强度差异不大,沟蚀是造成不同流域土壤侵蚀和沟道输沙差异的主要水力侵蚀形式.     

典型岩溶流域不同地貌类型景观结构分析——以云南小江流域为例

利用2003年小江流域的TM影像，结合实地调查，再根据流域地质分布和地貌发育情况，将流域地貌类型划分为岩溶地貌和非岩溶地貌两个一级类型景观，在此基础上，根据地貌发育程度结合高程情况，将岩溶区又划分为6个岩溶景观，非岩溶地貌分为两个二级类型景观。应用景观生态学原理，并通过Fragstats 3．3软件在流域尺度上计算了一些相关指标。结果表明：岩溶区的景观生态特征总体上体现了其生态环境的特殊性和脆弱性，地表水资源溃乏，土层薄、土壤资源零星分布且易流失，造成未利用地面积大，石漠化现象严重，土地利用程度低的特点。非岩溶区景观生态由于耕地和林地占绝对优势，石漠化面积少，香农多样性指数和均匀度低，景观的异质性较低，结构较为简单。     

Origin and stratigraphy of phreatomagmatic deposits at the Pleistocene Sinker Butte Volcano, Western Snake River Plain, Idaho

Sinker Butte is the erosional remnant of a very large basaltic tuff cone of middle Pleistocene age located at the southern edge of the western Snake River Plain. Phreatomagmatic tephras are exposed in complete sections up to 100 m thick in the walls of the Snake River Canyon, creating an unusual opportunity to study the deposits produced by this volcano through its entire sequence of explosive eruptions. The main objectives of the study were to determine the overall evolution of the Sinker Butte volcano while focusing particularly on the tephras produced by its phreatomagmatic eruptions. Toward this end, twenty-three detailed stratigraphic sections ranging from 20 to 100 m thick were examined and measured in canyon walls exposing tephras deposited around 180° of the circumference of the volcano.Three main rock units are recognized in canyon walls at Sinker Butte: a lower sequence composed of numerous thin basaltic lava flows, an intermediate sequence of phreatomagmatic tephras, and a capping sequence of welded basaltic spatter and more lava flows. We subdivide the phreatomagmatic deposits into two main parts, a series of reworked, mostly subaqueously deposited tephras and a more voluminous sequence of overlying subaerial surge and fall deposits. Most of the reworked deposits are gray in color and exhibit features such as channel scour and fill, planar-stratification, high and low angle cross-stratification, trough cross-stratification, and Bouma-turbidite sequences consistent with their being deposited in shallow standing water or in braided streams. The overlying subaerial deposits are commonly brown or orange in color due to palagonitization. They display a wide variety of bedding types and sedimentary structures consistent with deposition by base surges, wet to dry pyroclastic fall events, and water saturated debris flows.Proximal sections through the subaerial tephras exhibit large regressive cross-strata, planar bedding, and bomb sags suggesting deposition by wet base surges and tephra fallout. Medial and distal deposits consist of a thick sequence of well-bedded tephras; however, the cross-stratified base-surge deposits are thinner and interbedded within the fallout deposits. The average wavelength and amplitude of the cross strata continue to decrease with distance from the vent. These bedded surge and fall deposits grade upward into dominantly fall deposits containing 75–95% juvenile vesiculated clasts and localized layers of welded spatter, indicating a greatly reduced water-melt ratio. Overlying these “dryer” deposits are massive tuff breccias that were probably deposited as water saturated debris flows (lahars). The first appearance of rounded river gravels in these massive tuff breccias indicates downward coring of the diatreme and entrainment of country rock from lower in the stratigraphic section. The “wetter” nature of these deposits suggests a renewed source of external water. The massive deposits grade upward into wet fallout tephras and the phreatomagmatic sequence ends with a dry scoria fall deposit overlain by welded spatter and lava flows.Field observations and two new ⁴⁰Ar–³⁹Ar incremental heating dates suggest the succession of lavas and tephra deposits exposed in this part of the Snake River canyon may all have been erupted from a closely related complex of vents at Sinker Butte. We propose that initial eruptions of lava flows built a small shield edifice that dammed or disrupted the flow of the ancestral Snake River. The shift from effusive to explosive eruptions occurred when the surface water or rising ground water gained access to the vent. As the river cut a new channel around the lava dam, water levels dropped and the volcano returned to an effusive style of eruption.