A FOOD GEOGRAPHY OF THE GREAT PLAINS

ABSTRACT. This article explores the regional identity of the Great Plains through its foodways using 744 responses from a mailed survey that asked participants to plan a representative menu for their locale. The strongest association is with beef—not surprising in an area known for cattle ranching. Other commonalities include potatoes, beans, and corn. Differentiation within the region is marked by preparation methods for beef as well as emphases on cornbread and peach cobbler in the south, rhubarb pie in the north, tortillas and sopapillas in the southwest, and pickles in two separate clusterings.     

长江口海域新生代地层与断裂活动性初探

长江口海域通过浅层人工地震勘察查明，新生代地层可分为5个地震层。分别为第四系、上新统、中新统上段、中新统下段及始新统。第三纪地层自东北向西南依次超覆、减薄尖灭，上部被第四纪地层不整合覆盖。沉积基底主要由晚侏罗世火山岩系及燕山晚期酸性小岩体构成，未发现早第三纪及晚白垩世断陷盆地。断裂构造很发育，按展布方向大体可归为北东、北西及近东西向3组，皆为正断层。前两者数量多、延伸长、断距大，与同区的航磁异常构架吻合。北东向断裂分段明显，西南段为第四纪断裂，中段为晚第三纪断裂，东北段为早第三纪断裂；而北西向断裂分段不很清晰。两者的垂直位移速率平均在0．015mm/a。本文对该海域有关的几个地质问题进行了讨论。     

乌鲁木齐市华凌拟建地下停车场活断层探测与城市活断层探测手段适用性初步分析

根据在乌鲁木齐市拟建华凌地下停车场活断层探测与地震危险性评价工作，对通过乌鲁木齐闹市区的雅玛里克断裂进行了实验性探测。采用了浅层地震探测、地质雷达探测、地形测量和坑探剖面方法，对这些手段的适用性进行了初步分析和讨论。     

岩石断裂作用的复杂性和混沌动力学

断裂是一个复杂的动力学体系,受到岩石结构、反应、流体迁移、应力、岩石变形和力学等多种地质因素和过程的耦合控制。本文建立了断裂体系的反应-输运-力学耦合动力学模型并编制了模拟程序。以湖南水口山矿区为例,通过动力学模拟表明不同地层岩性的断裂渗透率大小和演化特征存在显著差异,断裂作用促使岩石渗透率的空间非均匀性增强,从而有利于流体的局部汇聚和矿体的形成。断裂中压力随时间呈现出非周期振荡变化,反映了断裂演化的混沌特征。     

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.     

Microearthquakes and faulting in the southern Okinawa Trough

Southern Okinawa Trough represents an early stage of back-arc rifting and is characterized by normal faulting and microearthquakes. Earthquake distribution and deep structure of fault was investigated to clarify active rifting in the southern Okinawa Trough, where two parallel grabens are located. A network of ocean bottom seismometers (OBSs) that displayed the hypocenters of 105 earthquakes were observed for a period of 4 days in southern-graben (SG). Most of the microearthquakes occurred in a cluster about 7 km wide, which on a cross-section striking N45°E dips 48° to the southwest. Relocated hypocenters, which are recorded by a local seismic network, show scattered distribution around the southern-graben. There are no remarkable surface faults in the southern-graben. On the other hand, the recalculation of hypocenter locations of 1996 earthquakes swarm recorded by a local seismic network suggests that the swarm is associated with normal faulting on the southern side of northern-graben (NG). Thus, the undeveloped southern-graben is located to the south of the developed northern-graben. Southward migration of rifting, which may be caused by migration of volcanism, could thus be occurring in the southern Okinawa Trough. The extension rate computed for the southern Okinawa Trough from the fault model of the northern-graben is 4.6 cm/year, which is 59–102% of the extension rate (GPS measurements). This result indicates that the majority of extensional deformation is concentrated within the center of the northern-graben in the Okinawa Trough.     

Coal mining along the Warfield Fault, Mingo County, West Virginia: a tale of ups and downs

Mine development along a 15-mile (24 km) section of the Warfield Fault in Mingo County, West Virginia has broadened the geological understanding of the fault and its related structures. The fault has been exposed in two new road cuts, one in the northeast-trending segment at Neely Branch and one in the eastern east-trending segment at the head of Marrowbone Creek. Both exposures show a well-defined normal fault with a 45° to 55° N dip, juxtaposing sandstone/shale packages from the roof and the floor of the Coalburg seam. The fault is associated with a thin gouge zone, some drag folding, and parallel jointing. Its trace tends to run parallel to the crest of the adjacent Warfield Anticline. Based on underground mine development and detailed core drilling, the vertical offset along the fault plane ranges from a maximum of 240 ft (73 m) in the central part of the area near the structural bend to less than 100 ft (30 m) in western and eastern directions. The fault is located along the relatively steeply dipping (locally in excess of 25%) southern limb of the Warfield Anticline, and appears related to a late phase of extension involving folded Pennsylvanian strata. On a regional scale, the lithological variations across the fault do not suggest any appreciable strike-slip component.Underground room and pillar mines in the Coalburg seam north and south of the fault have been greatly impacted by the Warfield structures. Due to the combined (and opposite) effects of the folding and faulting, the northern mines are located up to 400 ft (125 m) higher in elevation than the southern ones. Overland conveyor belts connect mining blocks separated by the fault. The practical mining limit along the steep slopes toward the fault is around 15%. Subsidiary normal faults with offsets in the 5- to 15-ft (1.5–4.5 m) range are fairly common and form major roof control and production hurdles. Overall, the Warfield structures pose an extra challenge to mine development in this part of the Appalachian Coalfields.     

Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.     

Age and paleoclimatic significance of late Holocene lakes in the Carson Sink, NV, USA

New dating in the Carson Sink at the termini of the Humboldt and Carson rivers in the Great Basin of the western United States indicates that lakes reached elevations of 1204 and 1198 m between 915 and 652 and between 1519 and 1308 cal yr B.P., respectively. These dates confirm Morrison's original interpretation (Lake Lahontan: Geology of the Southern Carson Desert, Professional Paper 40, U.S. Geol. Survey, 1964) that these shorelines are late Holocene features, rather than late Pleistocene as interpreted by later researchers. Paleohydrologic modeling suggests that discharge into the Carson Sink must have been increased by a factor of about four, and maintained for decades, to account for the 1204-m lake stand. The hydrologic effects of diversions of the Walker River to the Carson Sink were probably not sufficient, by themselves, to account for the late Holocene lake-level rises. The decadal-long period of increased runoff represented by the 1204-m lake is also reflected in other lake records and in tree ring records from the western United States.     

Late Pleistocene and early Holocene rivers and wetlands in the Bonneville basin of western North America

Field investigations at Dugway Proving Ground in western Utah have produced new data on the chronology and human occupation of late Pleistocene and early Holocene lakes, rivers, and wetlands in the Lake Bonneville basin. We have classified paleo-river channels of these ages as “gravel channels” and “sand channels.” Gravel channels are straight to curved, digitate, and have abrupt bulbous ends. They are composed of fine gravel and coarse sand, and are topographically inverted (i.e., they stand higher than the surrounding mudflats). Sand channels are younger and sand filled, with well-developed meander-scroll morphology that is truncated by deflated mudflat surfaces. Gravel channels were formed by a river that originated as overflow from the Sevier basin along the Old River Bed during the late regressive phases of Lake Bonneville (after 12,500 and prior to 11,000 ¹⁴C yr B.P.). Dated samples from sand channels and associated fluvial overbank and wetland deposits range in age from 11,000 to 8800 ¹⁴C yr B.P., and are probably related to continued Sevier-basin overflow and to groundwater discharge. Paleoarchaic foragers occupied numerous sites on gravel-channel landforms and adjacent to sand channels in the extensive early Holocene wetland habitats. Reworking of tools and limited toolstone diversity is consistent with theoretical models suggesting Paleoarchaic foragers in the Old River Bed delta were less mobile than elsewhere in the Great Basin.