Finite-element modelling of Tertiary paleostress fields in the eastern part of the Tajo Basin (central Spain)

Three subsequent Tertiary paleostress fields that are deduced from fault-slip data for the eastern part of the Tajo Basin are analyzed by finite-element studies. The modelling results show that maximum horizontal stresses (S_Hmax) are mainly controlled by the geometry of the model limits and the boundary conditions applied. The models are used to test two hypotheses on the origin of the Altomira Range. A local stress field responsible for its formation (‘Altomira') can be modelled successfully by superposition in time and place of two major paleostress fields (‘Iberian' and ‘Guadarrama'). Stress trajectories have been modelled with respect to a homogeneous cover and heterogeneous basement to investigate the role of rheological contrasts between different basement blocks on the orientation of the stress field. Results of this kind of modelling suggest a mechanical decoupling between the cover and the basement, especially for the ‘Altomira' paleostress field.     

Temporal and spatial variations in tectonic subsidence in the Iberian Basin (eastern Spain): inferences from automated forward modelling of high-resolution stratigraphy (Permian–Mesozoic)

By subsidence analysis on eighteen surface sections and 6 wells, which cover large part of the Iberian Basin (E Spain) and which are marked by high-resolution stratigraphy of the Permian, Triassic, Jurassic and Cretaceous, we quantify the complex Permian and Mesozoic tectonic subsidence history of the basin. Backstripping analysis of the available high resolution and high surface density of the database allows to quantify spatial and temporal patterns of tectonically driven subsidence to a much higher degree than previous studies. The sections and wells have also been forward modelled with a new ‘automated' modelling technique, with unlimited number of stretching phases, in order to quantify variations in timing and magnitude of rifting. It is demonstrated that the tectonic subsidence history in the Iberian Basin is characterized by pulsating periods of stretching intermitted by periods of relative tectonic quiescence and thermal subsidence. The number of stretching phases appears to be much larger than found by earlier studies, showing a close match with stretching phases found in other parts of the Iberian Peninsula and allowing a clear correlation with discrete phases in the opening of the Tethys and Atlantic.     

Permeability of coals and characteristics of desorption tests: Implications for coalbed methane production

Desorption tests, conducted before development drilling, can predict early production rates of coalbed methane wells. In this study, results from 136 desorption tests from 30 coreholes are compared to subsequent production histories of surrounding wells. Coals studied are from the Carboniferous Pottsville Formation in the Black Warrior Basin of Alabama, USA. The investigation indicates that the best predictor for gas production is ‘‘gas yield at 120 days, divided by sample depth'. This quotient has a higher correlation with actual gas production than other variables examined, including original reserves in-place. Gas content of coal generally increases with depth. However, coal permeability, and hence the recovery factor, tends to decrease with depth. Therefore, coalbed methane exploration should focus on finding the optimal balance between gas yield and depth. Commercially successful wells are characterized by coals with high gas yields at shallow depths. Desorption tests, especially of slowly-desorbing coals, should be run for a minimum of 120 days, or else should be extrapolated to that time if tests are terminated earlier.     

渤海湾盆地早第三纪水平面升降和全球海平面升降的不一致性

本文通过对渤海湾盆地下第三系中半咸水化石纵向分布特点研究,并根据新的地层划分方案,利用古生物－岩相综合分析方法绘制了该地区早第三纪水平面升降曲线,发现半咸水生物出现在水进初期,在最大水进期消失,水平面升降曲线一全球海平面升降曲线无直接关系,即水平面的上升示受海平面上升的影响,从而证明此阶段无海侵发生,非海侵观点对于总结我国陆相地层的油气勘探理论及实践具有重要意义。     

Arc–arc collision in the Izu collision zone, central Japan, deduced from the Ashigara Basin and adjacent Tanzawa Mountains

The Pleistocene Ashigara Basin and adjacent Tanzawa Mountains, Izu collision zone, central Japan, are examined to better understand the development of an arc–arc orogeny, where the Izu–Bonin – Mariana (IBM) arc collides with the Honshu Arc. Three tectonic phases were identified based on the geohistory of the Ashigara Basin and the denudation history of the Tanzawa Mountains. In phase I, the IBM arc collided with the Honshu Arc along the Kannawa Fault. The Ashigara Basin formed as a trench basin, filled mainly by thin-bedded turbidites derived from the Tanzawa Mountains together with pyroclastics. The Ashigara Basin subsided at a rate of 1.7 mm/year, and the denudation rate of the Tanzawa Mountains was 1.1 mm/year. The onset of Ashigara Basin Formation is likely to be older than 2.2 Ma, interpreted as the onset of collision along the Kannawa Fault. Significant tectonic disruption due to the arc–arc collision took place in phase II, ranging from 1.1 to 0.7 Ma in age. The Ashigara Basin subsided abruptly (4.6 mm/year) and the accumulation rate increased to approximately 10 times that of phase I. Simultaneously, the Tanzawa Mountains were abruptly uplifted. A tremendous volume of coarse-grained detritus was provided from the Tanzawa Mountains and deposited in the Ashigara Basin as a slope-type fan delta. In phase III, 0.7–0.5 Ma, the entire Ashigara Basin was uplifted at a rate of 3.6 mm/year. This uplift was most likely caused by isostatic rebound resulting from stacking of IBM arc crust along the Kannawa Fault which is not active as the decollement fault by this time. The evolution of the Ashigara Basin and adjacent Tanzawa Mountains shows a series of the development of the arc–arc collision; from the subduction of the IBM arc beneath the Honshu Arc to the accretion of IBM arc crust onto Honshu. Arc–arc collision is not the collision between the hard crusts (massif) like a continent–continent collision, but crustal stacking of the subducting IBM arc beneath the Honshu Arc intercalated with very thick trench fill deposits.     

北淮阳盆岭带的构造演化与铀成矿

北淮阳盆岭构造带是大别造山带的重要组成部分。佛子岭岩群代表了早古生代扬子地块北缘大别古岛弧弧前海盆的火山沉积建造,在加里东运动陆块对接过程中变形变质。石炭系梅山群具磨拉石建造特征。在华力西印支期陆内俯冲褶皱带的基础上,燕山期沿桐柏桐城断裂伸展北移,近东西向断陷盆地发育,形成盆岭构造景观。南侧大别山强烈隆升,铸就了现今大别山变质核杂岩构造格局。中生代岩浆活动是区内重要铀源,具有成矿潜力的地质体是响洪甸正长岩体和北带粗面质火山碎屑岩     

新疆准噶尔盆地南缘拉张伸展动力学环境的探讨

准噶尔盆地南缘在中生代、甚至新生代很长一段时间处于拉张伸展环境。至新生代晚期才转换成挤压环境。本文从六个方面对拉张伸展动力学环境进行了探讨,指出了准噶尔盆地南缘伸展构造与后期反转构造的研究对这一地区油气运移规律的探讨具有重要意义。结合生油岩系的生油高峰期分析,中生代的伸展构造与二叠纪、侏罗纪生油岩系的生油高峰是配套的,它们形成的断块,同沉积背斜等对捕获早期油气起着决定性作用。     

一种现代不对称波痕的成因特征及类比分析——以民和盆地红古城地区下白垩统第8岩组为例

本文以黄河边上现代不对称波痕的形成为例,结合民和盆地下白垩统第８岩组沉积环境进行类比分析,一改过去传统的“浅水”认识,而把它定为三角洲平原相沉积。因而不对称波痕不能作为某一种沉积环境,它可以广泛生成于不同的环境。因此应更多强调综合分析、类比分析、层序基本单元和体系域分析,使盆地岩石地层单位的古环境解释建立在可靠的理性基础上。     

基准面变化与层序地层——以塔里木盆地陆相地层为例

以海平面变化 为基出的层序地层学理论在研制陆相盆地中遇到了困难,地层基准面变化 在解释地层层序成因和地层层序发挥了重要作用。     

黄县早第三纪断陷盆地充填特征及层序划分

黄县早第三纪断陷盆地充填沉积序列共划分出三个层序（三级层序）,层序Ⅰ不完整,层序Ⅱ和层序Ⅲ皆由低位体系域、扩张体系域和萎缩体系域三个基本单位构成。层序界面主要有区域构造运动界面和盆地构造应力转换面体系域转换界面两种类型。聚煤作用、油气聚集主要发生在盆地低水位至扩张期,低水位和扩张体系域含有主要的煤层和油气母岩（生油岩）。