Mesozoic rift to post-rift tectonostratigraphy of the Sverdrup Basin,Canadian Arctic

Jurassic-Cretaceous rift successions and basin geometries of the Sverdrup Basin are reconstructed from a review and integration of stratigraphy, igneous records, outcrop maps, and subsurface data. The rift onset unconformity is in the Lower Jurassic portion of the Heiberg Group (approximately 200–190 Ma). Facies transgress from early syn-rift sandstones of the King Christian Formation to marine mudstones of the Jameson Bay Formation. The syn-rift succession of marine mudstones in the basin centre, Jameson Bay to Deer Bay formations, ranges from Early Jurassic (Pleinsbachian) to Early Cretaceous (Valanginian). Early post-rift deposits of the lower Isachsen Formation are truncated by the sub-Hauterivian unconformity, which is interpreted as a break up unconformity at approximately 135–130 Ma. Cessation of rift subsidence allowed for late post-rift sandstone deposits of the Isachsen Formation to be distributed across the entire basin. Marine deposition to form mudstone of the Christopher Formation throughout the Canadian Arctic Islands and outside of the rift basin records establishment of a broad marine shelf during post-rift thermal subsidence at the start of a passive margin stage. The onset of the High Arctic Large Igneous Province at approximately 130 Ma appears to coincide with the breakup unconformity, and it is quite typical that magma-poor rifted margins have mainly post-rift igneous rocks. We extend the magma-poor characterization where rifting is driven by lithospheric extension, to speculatively consider that the records from Sverdrup Basin are consistent with tectonic models of retro-arc extension and intra-continental rifting that have previously been proposed for the Amerasia Basin under the Arctic Ocean.     

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.     

Controls on reservoir heterogeneity of tight sand oil reservoirs in Upper Triassic Yanchang Formation in Longdong Area,southwest Ordos Basin,China: Implications for reservoir quality prediction and oil accumulation

Compared to conventional reservoirs, pore structure and diagenetic alterations of unconventional tight sand oil reservoirs are highly heterogeneous. The Upper Triassic Yanchang Formation is a major tight-oil-bearing formation in the Ordos Basin, providing an opportunity to study the factors that control reservoir heterogeneity and the heterogeneity of oil accumulation in tight oil sandstones.The Chang 8 tight oil sandstone in the study area is comprised of fine-to medium-grained, moderately to well-sorted lithic arkose and feldspathic litharenite. The reservoir quality is extremely heterogeneous due to large heterogeneities in the depositional facies, pore structures and diagenetic alterations. Small throat size is believed to be responsible for the ultra-low permeability in tight oil reservoirs. Most reservoirs with good reservoir quality, larger pore-throat size, lower pore-throat radius ratio and well pore connectivity were deposited in high-energy environments, such as distributary channels and mouth bars. For a given depositional facies, reservoir quality varies with the bedding structures. Massive- or parallel-bedded sandstones are more favorable for the development of porosity and permeability sweet zones for oil charging and accumulation than cross-bedded sandstones.Authigenic chlorite rim cementation and dissolution of unstable detrital grains are two major diagenetic processes that preserve porosity and permeability sweet zones in oil-bearing intervals. Nevertheless, chlorite rims cannot effectively preserve porosity-permeability when the chlorite content is greater than a threshold value of 7%, and compaction played a minor role in porosity destruction in the situation. Intensive cementation of pore-lining chlorites significantly reduces reservoir permeability by obstructing the pore-throats and reducing their connectivity. Stratigraphically, sandstones within 1 m from adjacent sandstone-mudstone contacts are usually tightly cemented (carbonate cement > 10%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The carbonate cement most likely originates from external sources, probably derived from the surrounding mudstone. Most late carbonate cements filled the previously dissolved intra-feldspar pores and the residual intergranular pores, and finally formed the tight reservoirs.The petrophysical properties significantly control the fluid flow capability and the oil charging/accumulation capability of the Chang 8 tight sandstones. Oil layers usually have oil saturation greater than 40%. A pore-throat radius of less than 0.4 μm is not effective for producible oil to flow, and the cut off of porosity and permeability for the net pay are 7% and 0.1 mD, respectively.     

Paratacamite from Gypsum Veins in Sandstones of the Kuqa Basin,Xinjiang, China: Implications for a New Epigenetic Cu Enrichment Mechanism

The Kuqa Basin filled with Paleogene evaporite series is located in the northeast of the Tarim Basin, Xinjiang, China. It is famous for sandstone‐hosted Cu deposits formed by synsedimentary processes. However, our recent studies reveal that there has been another Cu mineralization mechanism in this basin. Field investigations show that there is a close relationship among faults, salt domes, and brine. Cu deposits are mainly located in two east–west‐trending anticlinal belts in the basin, adjacent to salt domes in the belts. Cu minerals in gypsum veins of the Jidike and Kangcun formations have been investigated by SEM, EDS, and X‐ray diffraction methods. The occurrence of paratacamite in gypsum veins has been reported to coexist with glauberite and halite in the joint planes of sandstones. In addition, it occurs accompanying residual crystal salt encrustation in limestone fractures, or in sandstones in dendritic form. These features indicate that the surface‐Cu enrichment in the Kuqa Basin might have originated from Cu‐bearing brine in the underlying evaporite units, which migrated upward along fractures. In addition, the presence of H₂S in the east–west fault belt in the Kuqa Basin, and the discovery of surface sulfur, calcium carbonate, and covellite, suggest thermochemical sulfate reduction near salt domes in the deeper parts of the rock units. This process resulted in the generation of reduced brine and provided a favorable environment for Cu enrichment. Therefore, the surface‐Cu mineralization near salt domes is interpreted to be the result of Cu‐bearing brine migrating upward to the surface along faults (or joints) following the intrusion of deep salt domes. The geological evidence indicates the presence of reducing brine and Cu‐bearing brine near the salt dome in the deeper rocks of the Kuqa Basin, thus making the intrusive contact zone of the salt dome a favorable site for the epigenetic enrichment of Cu. Our study demonstrates that Cu enrichment in the Kuqa Basin resulted not only from synsedimentary deposition but also through epigenetic enrichment associated with salt dome intrusion and brine‐rich fluids.     

Snow disaster characteristics in Palongzangbu River Basin and mitigation countermeasures for road engineering

The Palongzangbu River Basin contains the highest number of maritime province glaciers in China.There are 130 glacial lakes,64 snow avalanche sites and 28 glacial debris flow gullies distributed within the basin.Snow disasters play a controlling role in the Sichuan-Tibet Highway construction,due to the terrain's special characteristics of high altitude and large height differential.Segmentation mitigation countermeasures for the Sichuan-Tibet Highway are presented based on snow disaster severity level and damage mode of the road.In the Ranwu to Midui section,snow avalanches are regional disasters, so the line should be placed in sunny slopes.In the Midui Gully to Yupu section,the line should be placed in shady slopes and at higher elevations to reduce the risk of glacial lake outburst.In the Yupu to Guxiang section,all three snow disasters are minimal.In the Guxiang to Tongmai section,glacier debris flows are the major threat,thus the road should be placed in shady slopes.     

湖南汝城盆地原定中侏罗世地层发现早白垩世孢粉组合

通过对湖南汝城盆地原定为中侏罗统的李家洞水库剖面28个孢粉样品的分析处理,发现24个样品有孢粉化石,化石呈现早白垩世孢粉化石组合特征。发现的早白垩世特征分子有高含量的无突肋纹孢Cicatricosisporites,徐氏孢Hsuisporites,刺毛孢Pilosisporites,膜环弱缝孢Aequitriradites,二连粉Erlianpollis,有突肋纹孢Appendicisporites,微囊粉Parvisaccites,以及少量被子植物花粉。依据孢粉化石组合特征,建议将本剖面时代重新厘定为早白垩世。     

东非鲁伍马盆地深水区构造-沉积演化过程及油气地质特征

利用深水区的二维、三维地震资料开展构造-沉积演化研究,鲁伍马盆地二叠纪—早侏罗世为冈瓦纳陆内—陆间裂谷活动期,发育河流—湖泊沉积;中侏罗世—早白垩世为马达加斯加漂移期,位于剪切型大陆边缘,发育海陆过渡相沉积;晚白垩世—渐新世为被动大陆边缘期,深水沉积广泛发育,重力流沉积延伸至戴维隆起带;中新世—第四纪为东非裂谷海域分支活动期,陆坡和凯瑞巴斯地堑发育深水重力流沉积。盆地垂向上形成"断—坳—断"结构,二叠纪—早侏罗世及中新世—现今发育两期明显的裂谷活动。马达加斯加漂移期的海相泥岩为深水区的主力烃源岩,古近纪的陆坡深水浊积砂体为主要储层。东非裂谷海域分支的断层活动沟通了下伏烃源岩,晚期断层不发育的西部陆坡成为主要的油气聚集区。     

鄂尔多斯盆地马家沟组中组合马五_5亚段白云岩特征及成因机理

通过对鄂尔多斯盆地马家沟组五段5亚段白云岩的岩石学和地球化学研究表明,主要岩性有泥晶白云岩、泥粉晶白云岩和粉晶白云岩等三类。泥晶白云岩类为泥晶结构,阴极发光为暗红光,白云石有序度低;Na、K和Sr值较高;δ~(13)C平均-1.23‰,δ~(18)O平均-7.59‰,锶同位素平均值0.709 81,形成于闭塞局限、盐度相对较高的环境,由准同生白云石化作用所形成,并发育少量晶间微孔。泥粉晶白云岩类为泥晶—细粉晶结构,不发光或发极暗的红光,白云石有序度0.75;常量元素、微量元素大幅降低;δ~(13)C和δ~(18)O的平均值分别是-0.43‰和-7.29‰,锶同位素平均值0.709 36,由准同生后回流渗透白云石化作用所形成,并发育晶间孔。粉晶白云岩不发光或发极暗红光,白云石有序度0.81;常量元素、微量元素有明显的突变;δ~(13)C和δ~(18)O平均值分别为-0.65‰和-6.46‰,锶同位素平均值0.709 67,由埋藏白云石化作用所形成,并发育晶间扩溶孔或溶蚀孔。     

频谱分解技术在泥页岩储层含气性预测中的应用——以柴达木盆地鱼卡凹陷为例

针对柴达木盆地北缘鱼卡凹陷中侏罗统大煤沟组泥页岩,利用地震频谱曲线在不同流体介质储层中的形态、斜率、主频与中心频率的差值等属性参数特征,识别陆相泥页岩层系的地震频谱属性特征,预测含气性。研究结果表明,中侏罗统大煤沟组上部能量系数较低,平均为0.6719,下部能量系数较高,平均为0.7521,结合现场含气量和全烃特征认为,可以以能量系数0.7为界线,作为识别下部和上部含气性的标志,下部明显比上部含气性好。平面上进一步圈定了2个有利目标区,得到柴页1井勘探验证。因此,频谱分解技术可应用于中国陆相页岩气的勘查开发。     

柴达木盆地北缘富氦天然气的发现——兼议成藏地质条件

在柴达木盆地北缘全吉山、团鱼山地区的煤炭钻孔和泥页岩解吸气中发现了体积分数较高的氦气显示。对2个地区的6件样品进行甲烷C同位素和He同位素分析,其中2个样品的δ13C1值分别为-38.4‰和-39.9‰,属于有机成因。4个样品的3He/4He同位素测试结果在0.03×10-6~1.3×10-6之间,表明氦气来源以壳源氦为主,个别样品有少量幔源氦加入。通过区域背景资料和物探资料分析认为,柴北缘壳源成因的氦可能主要来源于基底富U、Th花岗岩体的放射性衰变,而柴北缘的山前深大断裂则可为氦的运移提供良好通道。氦气产生后,在垂向运移过程中结合其他烃类或非烃类气体,在侏罗系、古近系—新近系良好的储盖条件下,有可能形成独特的富氦天然气富集。