广西南丹地区有色金属尾砂型人工矿床地质特征及其资源化

广西南丹地区尾矿分布于大厂、车河、芒场等矿区。尾砂来自以锡石为主的多金属矿床，尾砂中除Sn，Pb，Zn，Ag，Sb的质量分数达到工业指标外，Au亦达到综合利用指标。通过试验证明，对尾矿中的细微粒锡石可采用风力分级选矿、磁选和化学选矿等方法回收；尾砂中的非金属资源可作为填充材料、水泥原料利用，使尾砂型人工矿床充分的资源化。     

Left upstream slope design for the Çatalan Dam, Adana, Turkey and its behaviour under actual earthquake loading

An investigation and remediation of instability along upstream cut slopes for an earthfill dam in differentially weathered rock in southern Turkey is described. The major instability problem was a 45-m high and 200-m long previously cut slope next to the main axis of the dam, above the diversion tunnels and water outlet structures. The slope was first designed and excavated in 1986 based on the temporary berm approach. Rising water level in the reservoir would change the shear strength parameters and the pore-water pressure in the slope; thus, probable deep failure would damage the entrance of the diversion tunnels and water outlet structures, as well as the earthfill embankment of the dam. In June 1996, the slope face was re-excavated and protected against wave erosion by placement of a layer of rock riprap over a layer of bedding and a filter material. A strong earthquake (M_S = 6.2) occurred during a period of rapid drawdown in 27 June 1998. The slope remained stable, although numerous tension cracks developed in Quaternary terrace deposits near the reservoir area.     

Glacial conditions that contribute to the regeneration of Fountain Glacier proglacial icing,Bylot Island,Canada

Proglacial icings are one of the most common forms of extrusive ice found in the Canadian Arctic. However, the icing adjacent to Fountain Glacier, Bylot Island, is unique due to its annual cycle of growth and decay, and perennial existence without involving freezing point depression of water due to chemical characteristics. Its regeneration depends on the availability of subglacial water and on the balance between ice accretion and hydro‐thermal erosion. The storage and conduction of the glacial meltwater involved in the accretion of the icing were analyzed by conducting topographic and ground penetrating radar surveys in addition to the modelling of the subglacial drainage network and the thermal characteristics of the glacier base. The reflection power analysis of the geophysical data shows that some areas of the lower ablation zone have a high accumulation of liquid water, particularly beneath the centre part of the glacier along the main supraglacial stream. A dielectric permittivity model of the glacier – sediment interface suggests that a considerable portion of the glacier is warm based; allowing water to flow through unfrozen subglacial sediments towards the proglacial outwash plain. All these glacier‐related characteristics contribute to the annual regeneration of the proglacial icing and allow for portions of the icing to be perennial. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of the elevation of saltwater wedge due to subsurface dams

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.     

Suspended sediment and total dissolved solid yield patterns at the headwaters of Urumqi River,northwestern China: a comparison between glacial and non‐glacial catchments

In order to understand the differences in the suspended sediment and total dissolved solid (TDS) yield patterns between the glacial and non‐glacial catchments at the headwaters of Urumqi River, northwestern China, water samples were collected from a glacier catchment and an empty cirque catchment within the region, during three melting seasons from 2006 to 2008. These samples were analyzed to estimate suspended sediment and TDS concentrations, fluxes and erosion rates in the two adjoining catchments. There were remarked differences in suspended sediment and TDS yield patterns between the two catchments. Suspended sediment concentrations were controlled mainly by the sediment source, whereas TDS concentrations were primarily related to the hydrologic interaction with soil minerals. Generally, the glacial catchment had much higher suspended sediment and TDS yields, together with higher denudation rates, than the non‐glacial catchment. Overall, glacial catchment was mainly dominated by physical denudation process, whereas the non‐glacial catchment was jointly influenced by physical and chemical denudation processes. The observed differences in material delivery patterns were mainly controlled by the runoff source and the glacial processes. The melting periods of glacier and snow were typically the most important time for the suspended sediment and TDS yields. Meanwhile, episodic precipitation events could generate disproportionately large yields. Subglacial hydrology dynamics, glaciers pluck and grind processes could affect erodibility, and the large quantities of dust stored on the glacier surface provided additional sources for suspended sediment transport in the glacial catchment. These mechanisms imply that, in response to climate change, the catchment behaviour will be modified significantly in this region, in terms of material flux. Copyright © 2013 John Wiley & Sons, Ltd.     

Review and enhancement of 3D concrete models for large‐scale numerical simulations of concrete structures

The present paper focuses on selected plasticity and damage‐plasticity models for describing the 3D material behavior of concrete. In particular, a plasticity model and a damage‐plasticity model are reviewed and evaluated. Based on the results of the evaluation, enhancements are proposed, aiming at improving the correspondence between predicted and observed material behavior and aiming at implementing a robust and efficient stress update algorithm in a finite element program for performing large‐scale 3D numerical simulations of concrete structures. The capabilities of the concrete models are demonstrated by 3D numerical simulations of benchmark tests with combined bending and torsional loading and combined compression and shear loading and by a large‐scale 3D finite element analysis of a model test of a concrete arch dam. Copyright © 2011 John Wiley & Sons, Ltd.     

Uncertainty in dam safety risk analysis

The character and importance of uncertainty in dam safety risk analysis drives how risk assessments are used in practice. The current interpretation of uncertainty is that, in addition to the aleatory risk which arises from presumed uncertainty in the world, it comprises the epistemic aspects of irresolution in a model or forecast, specifically model and parameter uncertainty. This is true in part but it is not all there is to uncertainty in risk analysis. The physics of hazards and of failure may be poorly understood, which goes beyond uncertainty in its conventional sense. There may be alternative scenarios of future conditions, for example non-stationarity in the environment, which cannot easily be forecast. There may also be deep uncertainties of the type associated with climate change. These are situations in which analysts do not know or do not agree on the system characterisation relating actions to consequences or on the probability distributions for key parameters. All of these facets are part of the uncertainty in risk analysis with which we must deal.     

基于F-MCDM的冰川旅游游客满意度综合评价及敏感性分析

游客满意度是衡量旅游地竞争力的关键因素之一,已受到众多旅游研究者的关注。在其热点研究中,有关冰川旅游游客满意度及不同游客属性间满意度差异的研究鲜见。选取达古冰川与海螺沟冰川为研究区,通过对游客属性细分,运用模糊多准则决策法（F-MCDM）及引入需求弹性理论对冰川旅游游客满意度进行了综合评价和敏感性分析,探讨了提升冰川旅游游客满意度的对策建议。结果表明：达古冰川游客实际满意度总体高于海螺沟冰川,两地均以管理与服务的满意度最高,消费状况与交通的满意度最低。就游客属性的相对满意度而言,两地均呈现男性满意度高于女性,高消费游客满意度高于低消费游客,高忠诚度游客满意度高于低忠诚度游客;两地相对满意度的差异表现在年龄、受教育程度、客源地和到访次数方面。相较于达古冰川,海螺沟冰川满意度敏感性更高,同等改进力度下游客满意度的提高更为明显高效,就两地满意度敏感性最高的景观特色而言,达古冰川1%的改善将提升游客满意度0.30%,而海螺沟冰川可提升0.45%;对于不同游客属性的满意度敏感性,两地均以不愿推荐、不愿重游和未达到期望的游客最高。最后依据满意度敏感性分析结果,为两地冰川旅游发展提出了关键属性改进、营销策略创新和旅游产品开发等针对性建议。     

岩溶坝基帷幕灌浆高注浆量控制措施与效果分析

帷幕灌浆是坝基防渗处理的一种常用技术手段,而岩溶地区因其岩溶发育致使岩溶裂隙和通道纵横交错,且难以获取其规律性,灌浆过程中往往会出现注浆量偏高的现象。为了能够既有效控制帷幕灌浆成本,又确保帷幕灌浆施工质量,就需要采用科学、合理、可靠的施工技术措施和手段,对高注浆量的情况进行重点控制和改进。本文结合某水电站岩溶坝基帷幕灌浆中突出的高注浆量现象,通过有针对性地从技术措施和控制手段等方面的综合探索与应用,最终达到了坝基防渗的目的,并最大限度地节约了帷幕灌浆的时间,有效控制了高材料消耗所带来的高成本问题,为类似项目的帷幕灌浆积累了一定的经验。     

微动技术在堤坝渗漏探测中的应用

堤坝是重要的水利工程,其安全性至关重要。坝体渗漏是常见的安全隐患之一,对坝体渗漏位置、程度以及坝体结构变化的探测一直是重要的物探课题。微动勘探作为一种新兴的物探手段,应用范围正逐步拓展,通过某水库大坝渗漏检测实例,展示频率-波数法微动线性点阵剖面测量进行大坝渗漏检测的效果,该技术通过提取频散曲线及视S波速度成像,刻画地层速度结构并圈定异常,可实现对大坝渗漏快速精确的无损探测,具有一定的方法优势和广泛的应用前景。