Lidar-aided analysis of boreal forest backscatter at Ku band

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.     

徐闻南山镇红树林沉积物及红树植物中重金属的累积特征与迁移规律

为探究重金属在红树林沉积物及红树植物中的分布累积及迁移规律,选取了徐闻南山镇红树林为研究对象,通过测定红树林沉积物及红树植物不同部位（根、茎、叶）的重金属质量分数,运用富集因子、生物富集系数、转移系数及相关性分析等方法进行分析。结果表明：1）红树林沉积物重金属质量分数表现为铬（Cr）＞锌（Zn）＞镍（Ni）＞铜（Cu）＞铅（Pb）＞砷（As）＞汞（Hg）＞镉（Cd）,为中等变异程度;除了镍（Ni）元素外,其余7种重金属未超过国家一级标准,除了铅（Pb）元素外,其余7种重金属均超过广东省土壤环境背景值,说明研究区沉积物中重金属具有一定的积累效应。2）沉积物中砷（As）、铜（Cu）、锌（Zn）、汞（Hg）、镍（Ni）、铬（Cr）富集因子值均＞1.5,说明受到轻微人为活动影响;各站位镍（Ni）富集因子值均＞5,结合研究区背景,反映了镍（Ni）受到自然和人为输入的共同影响。3）白骨壤体内重金属主要集中在根部,而红海榄体内重金属在根茎叶中分布相对均匀。白骨壤根茎叶部位的大多数重金属质量分数远高于红海榄,说明白骨壤对重金属的吸附能力比红海榄强。汞（Hg）集中分布在植物的叶片部位,且与其他重金属之间相关性不明显;推测汞（Hg）主要通过叶片吸收进入植物体内,与交通运输污染有关。4）不同红树植物对不同重金属富集能力各异,白骨壤对重金属的富集能力表现为：镉（Cd）＞砷（As）＞铜（Cu）＞锌（Zn）＞汞（Hg）＞铅（Pb）＞镍（Ni）＞铬（Cr）,红海榄表现为：镉（Cd）＞铜（Cu）＞汞（Hg）＞锌（Zn）＞铅（Pb）＞砷（As）＞镍（Ni）＞铬（Cr）。白骨壤和红海榄对汞（Hg）的运移能力都较强;红海榄对镉（Cd）的富集能力和转运能力都较强,而白骨壤对镉（Cd）富集能力较强,转运能力却较弱,这说明红树植物对重金属元素的富集能力与转运能力不存在正比关系。     

基于空间公平理论的公共交通服务评价——以深圳市为例

使用空间无关的公平性衡量指数评价公交服务时,会忽视公交服务需求与供给的空间分布特征.为解决此问题,论文提出基于空间公平理论的公交服务评价框架,即通过构建综合基尼系数与莫兰指数的空间公平评价方法,实现整体尺度公交服务评价;通过对分析单元上相对需求与相对供给变量的匹配关系、空间差距进行分析,实现局部尺度公交服务评价,对整体...     

REPRESENTATION OF SPECTRA BY CONTINUOUS FUNCTIONS

A general framework for manipulating spectra as functions in traditional multivariate methods such asPCA and PLS is described.The functional representation is very convenient for compression,ensuringsmoothness and continuity.There are two fundamentally different types of representations:(a)byfunctions and(b)by function coefficients.The use of coefficients is the most practical way of analysis.     

安徽省旅游星级饭店地域差异研究

根据2000～2005年安徽省星级饭店统计资料,利用变异系数这一度量标准分析了安徽省饭店在时间序列上和星级结构上的地域差异,结果表明:随着时间的变化饭店总数在各市间的差异在渐渐缩小.星级结构上五星级饭店地域分异程度最大,其次依次为一星级、四星级、三星级和二星级,通过安徽省各市国内旅游收入区位商和餐饮住宿业就业人员区位商与各市星级饭店数量相对水平的比较,找出不符合一般趋势的城市加以讨论.最后,运用SPSS分析软件对安徽省17个地市的星级饭店发展水平进行聚类分析,并讨论了运行结果所分出的4类城市,提出了饭店业发展的若干建议.     

采用扁铲侧胀试验估算土的侧向基床系数的探讨

根据双曲线拟合压缩试验和载荷试验形态，拟合扁铲侧胀试验形态，从小应变的扁铲侧胀试验推导出在工程上实用的大应变的土的侧向基床系数。     

地质异常理论在兰坪盆地演化中的应用

基于地质异常理论的分析，并结合兰坪盆地的地质、构造特点，充分发挥地壳升降系数法的定量化及其空间优势，对兰坪盆地地质、构造演化进行了形象、直观的表述，对进一步反演兰坪盆地独特构造格架形成的古应力场，具有十分重要的作用。     

山地蒸发的计算

本文研讨了山地下垫面蒸发的计算，提出了根据迳流系数和降水强度确定计算蒸发公式中与地形、植被、土壤等下垫面特性降水性质有关的参数的方法，经实际检验，结果令人满意。     

Causes of geothermal fields and characteristics of ground temperature fields in China

There are many arguments on energy sources and main controlling factors of geothermal fields, so a systematic study on the distribution of ground temperature fields shall be necessary. In this paper the thermal conduction forward method of geothermal field is used to simulate cooling rate of abnormal heat sources and heat transfer of the paleo-uplift model. Combined with a large number of geothermal field exploration cases and oil exploration well temperature curves of domestic and foreign, the following conclusions are drawn: (1) According to the magmatic activity time, the magmatism activities are divided into two categories: Magma active areas (activity time < 500 000 years) and weak/magma inactive areas (activity time > 500 000 years). The latter has a fast cooling rate (the cooling time of the magma pocket buried around 10 km is less than 200 000 years) after it has intruded into the shallow layer and it has no direct contribution to modern geothermal fields; (2) China belongs to a weak/magma inactive area such as Tengchong region and Qinghai-Tibet region because the chronological data of these regions show that its magma activity time is more than 500 000 years; (3) The temperature of most geothermal fields can be obviously divided into three segments in the vertical direction: A high geothermal gradient segment (Segment H) at the surface, then a low geothermal gradient segment (Segment L) at a secondary depth, and finally a lower temperature segment (Segment D) at a deeper depth. The temperature isoline presents a mirror reflection relation on the temperature profile, indicating that geothermal field is dominated by heat conduction, rather than having an abnormally high temperature “heat source” to provide heat; (4) Near-surface (0-5 km) materials’ lateral heterogeneity caused by tectonic movement shall probably be the main controlling factor of ground temperature fields.     

基于有理多项式模型的星载高分InSAR影像制作数字高程模型的研究

合成孔径雷达干涉测量是一种利用SAR影像复数据的相位信息提取地面三维信息的技术,它通过获取地面目标在两幅SAR影像上的相位差值来解算该点的三维坐标。有理多项式（RPC,Rational Polynomial Coefficient）模型作为一种数学意义上的几何模型,它独立于传感器和平台,简单且具有通用性,可建立地面任意坐标与影像空间的关系。本文在RPC模型用于替代星载SAR的距离多普勒模型和星载InSAR的干涉相位方程基础上,研究 RPC模型应用于星载高分辨率InSAR影像制作DEM的可行性和精度。利用兰州COSMO-SkyMed数据和资源三号三线阵数据制作的DEM为参考数据进行实验验证,RPC模型用于InSAR技术生成的DEM,中误差为7.55米。