Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

DEVELOPMENT OF A DECISION SUPPORT SYSTEM FOR MANAGING PESTICIDE LOSSES IN AGRICULTURAL WATERSHEDS

1 INTRODUCTION Agricultural use of pesticides has been recognized as one of the important non-point pollution sources in the world, and the pesticide application to agricultural lands has led to large amounts of residues discharged into surface water through runoff (Leonard, 1990). There have been growing concerns about the fate and transport of pesticides in agricultural lands, due to the associated adverse impacts on water environment and human health (Agassi et al., 1995; Ng and Clegg…     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Petrography and uplift history of the Quaternary Takidani Granodiorite: could it have hosted a supercritical (HDR) geothermal reservoir?

The Quaternary Takidani Granodiorite (Japan Alps) is analogous to the type of deep-seated (3–5 km deep) intrusive-hosted fracture network system that might support (supercritical) hot dry/wet rock (HDR/HWR) energy extraction. The I-type Takidani Granodiorite comprises: porphyritic granodiorite, porphyritic granite, biotite-hornblende granodiorite, hornblende-biotite granodiorite, biotite-hornblende granite and biotite granite facies; the intrusion has a reverse chemical zonation, characterized by >70 wt% SiO₂ at its inferred margin and <67 wt% SiO₂ at the core. Fluid inclusion evidence indicates that fractured Takidani Granodiorite at one time hosted a liquid-dominated, convective hydrothermal system, with <380°C, low-salinity reservoir fluids at hydrostatic (mesothermal) pressure conditions. ‘Healed’ microfractures also trapped >600°C, hypersaline (35 wt% NaCl_eq) fluids of magmatic origin, with inferred minimum pressures of formation being 600–750 bar, which corresponds to fluid entrapment at 2.4–3.0 km depth. Al-in-hornblende geobarometry indicates that hornblende crystallization occurred at about 1.45 Ma (7.7–9.4 km depth) in the (marginal) eastern Takidani Granodiorite, but later (at 1.25 Ma) and shallower (6.5–7.0 km) near the core of the intrusion. The average rate of uplift across the Takidani Granodiorite from the time of hornblende crystallization has been 5.1–5.9 mm/yr (although uplift was about 7.5 mm/yr prior to 1.2 Ma), which is faster than average uplift rates in the Japan Alps (3 mm/yr during the last 2 million years). A temperature–depth–time window, when the Takidani Granodiorite had potential to host an HDR system, would have been when the internal temperature of the intrusive was cooling from 500°C to 400°C. Taking into account the initial (7.5 mm/yr) rate of uplift and effects of erosion, an optimal temperature–time–depth window is proposed: for 500°C at 1.54–1.57 Ma and 5.2±0.9 km (drilling) depth; and 400°C at 1.36–1.38 Ma and 3.3±0.8 km (drilling) depth, which is within the capabilities of modern drilling technologies, and similar to measured temperature–depth profiles in other active hydrothermal systems (e.g. at Kakkonda, Japan).     

Characteristics of Tectonic Deformation and Mechanisms for the Active Maxianshan-Xinglongshan Fault System in the Lanzhou Area

A detailed investigation permitted us to obtain quantitative data concerning fine geometric structures of 4 faults of the active Maxianshan-Xinglongshan fault system and the latest movement along them. Of them the northern Maxianshan border fault is a large-scale, strongly active Holocene reverse sinistral strike-slip fault, the other 3 faults, the southern Maxianshan border fault and the southern Xinglongshan border and the northern Xinglongshan border faults are the accompanying active late-Pleistocene thrust faults, which are incorporated into the main strike-slip fault, the northern Maxianshan border fault at depth. It is the most important earthquake-controlling fault in the Lanzhou area, the fault influences and constrains the seismic activity in the area.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Identification of soil degradation during earthquake excitations by Bayesian inference

A Bayesian inference approach is introduced to identify soil degradation behaviours at four downhole array sites. The approach of inference is based on a parametric time‐varying infinite impulse response filter model. The approach is shown to be adaptive to the changes of filter parameters and noise amplitudes. Four sites, including the Lotung (Taiwan), Chiba (Japan), Garner Valley (California), and Treasure Island (California) sites with downhole seismic arrays are analysed. Our results show two major types of soil degradation behaviour: the well‐known strain‐dependent softening, and reduction in stiffness that is not instantaneously recoverable. It is also found that both types of soil degradation are more pronounced in sandy soils than in clayey soils. The mechanism for the second type of soil degradation is not yet clear to the authors and suggested to be further studied. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of instrumented bridge systems

Several recorded motions for seven bridge systems in California during recent earthquakes were analysed using parametric and non‐parametric system identification (SI) methods. The bridges were selected considering the availability of an adequate array of accelerometers and accounting for different structural systems, materials, geometry and soil types. The results of the application of SI methods included identification of modal frequencies and damping ratios. Excellent fits of the recorded motion in the time domain were obtained using parametric methods. The multi‐input/single‐output SI method was a suitable approach considering the instrumentation layout for these bridges. Use of the constructed linear filters for prediction purposes was also demonstrated for three bridge systems. Reasonable prediction results were obtained considering the various limitations of the procedure. Finally, the study was concluded by identifying the change of the modal frequencies and damping of a particular bridge system in time using recursive filters. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.