GPS与全站仪在地质剖面测量中的应用

本文以密云县石城镇泥石流沟堆积物剖面测量为例介绍GPS,全站仪在地质剖面测量中的应用,室内数据处理和剖面图的生成。与传统的地质剖面测量方法相比较,运用GPS,全站仪测量地质剖面快捷,精度高,误差小。基于CAD技术的地质剖面绘制系统在图形表达方面具有优势。     

GPS数据采集技术及其在海洋调查中的应用

本文应用VB6．0开发了智能化的GPS数据采集软件．对该软件的功能进行了简单的介绍，同时对一些关键技术作了较详细的描述。利用该软件、GPS接收机及PC机的组合，可对走航式测量仪器(或移动设备)进行实时定位并保存定位记录，且大大减少一些不必要的数据，使得软件更为实用。     

对称模式下的CHAMP弯曲角掩星数据同化

简单介绍了无线电掩星技术探测行星大气的发展史,列举了该技术中存在的若干问题。从 Eyre提出的统计学的最优估计反演方法,比较了用相位、弯曲角和折射率作为同化因子时出现的问题和各自的优缺点。对弯曲角同化因子,以欧洲中期天气预报中心(ECMWF)资料为背景场,运用一维变分技术,进行CHAMP掩星观测资料变分同化反演,从而获得水汽和温度剖面。将反演获得的气象剖面与非同化的剖面作比较,并且采用相应的探空气球资料作为验证,可以看出变分同化技术比传统的标准反演技术反演误差小。证实掩星数据资料的一维变分同化技术可以改进目前的数值天气预报模式。     

差分法周跳探测与修复方法改进

在目前常用的周跳探测与修复方法基础上 ,提出了首先将观测资料按照观测历元不连续分成若干小弧段 ,然后利用差分法进行周跳探测 ,根据差分后周跳放大的特性判断周跳和野值 ,并确定其位置利用宽带组合和电离层组合的方法解算周跳大小。通过实例验证了其有效性。     

利用IGS星历预报GPS卫星轨道

在动力学轨道拟合以及轨道积分的基础上,提出了基于IGS精密星历的GPS卫星轨道预报方法。该方法首先利用已知的IGS精密星历作为虚拟观测值,采用动力学方法拟合出GPS卫星的初始轨道和动力学参数,然后再通过积分来预报GPS卫星的轨道。主要讨论了基于不同弧段的IGS星历时,该方法对GPS卫星轨道的拟合和预报情况。研究结果显示:对于6 d弧段以内的IGS精密星历,其拟合轨道与IGS精密星历差值的三维RMS值均优于4 cm,随着拟合弧段的增加,拟合残差变大;当利用2～6 d弧段的IGS星历来预报GPS轨道时,大部分卫星第1天、第7天和第30天的三维预报精度可优于0.1 m、3 m和100 m。其中,2d弧段的IGS星历对GPS卫星第1天和第7天的预报结果最好,5 d弧段的IGS星历对GPS卫星第30天的预报结果最好。     

Leveling the Sea Surface Using a GPS-Catamaran Special Issue: Jason-1 Calibration/Validation

In the framework of the TOPEX/Poseidon and Jason-1 CNES-NASA missions, two probative experiments have been conducted at the Corsica absolute calibration site in order to determine the local marine geoid slope under the ascending TOPEX/Poseidon and Jason-1 ground track (No. 85). An improved determination of the geoid slope was needed to better extrapolate the offshore (open-ocean) altimetric data to on-shore tide-gauge locations. This in turn improves the overall precision of the calibration process. The first experiment, in 1998, used GPS buoys. Because the time required to cover the extended area with GPS buoys was thought to be prohibitive, we decided to build a catamaran with two GPS systems onboard. Tracked by a boat at a constant speed, this innovative system permitted us to cover an area of about 20 km long and 5.4 km wide centered on the satellites' ground track. Results from an experiment in 1999 show very good consistency between GPS receivers: filtered sea-surface height differences have a mean bias of ?0.2 cm and a standard deviation of 1.2 cm. No systematic error or distortions have been observed and crossover differences have a mean value of 0.2 cm with a standard deviation of 2.7 cm. Comparisons with tide gauges data show a bias of 1.9 cm with a standard deviation of less than 0.5 cm. However, this bias, attributable in large part to the effect of the catamaran speed on the waterline, does not affect the geoid slope determination which is used in the altimeter calibration process. The GPS-deduced geoid slope was then incorporated in the altimeter calibration process, yielding a significant improvement (from 4.9 to 3.3 cm RMS) in the agreement of altimeter bias determinations from repeated overflight measurements.     

One-Centimeter Orbit Determination for Jason-1: New GPS-Based Strategies

The U.S./French Jason-1 satellite is carrying a state-of-the-art GPS receiver to support precise orbit determination (POD) requirements. The performance of the Jason-1 “BlackJack” GPS receiver was strongly reflected in early POD results from the mission, enabling radial accuracies of 1–2 cm soon after the satellite's 2001 launch. We have made further advances in the GPS-based POD for Jason-1, most notably in describing the phase center variations of the on-board GPS antenna. We have also adopted new geopotential models from the Gravity Recovery and Climate Experiment (GRACE). The new strategies have enabled us to better exploit the unique contributions of the BlackJack GPS tracking data in the POD process. Results of both internal and external (e.g., laser ranging) comparisons indicate that orbit accuracies of 1 cm (radial RMS) are being achieved for Jason-1 using GPS data alone.     

Potential Seismic Risk in Taiwan Strait Region

GPS observation indicates that the Fujian coastal region of China mainland, the region of Taiwan Strait and northern Taiwan island all show a generally homogenous horizontal motion with weak deformation. Historical earthquake record over more than 800 years and modern instrumental data reveal that there is potential seismic risk in and around Taiwan Strait region. After the National Seismic Zoning Map of China (2001) the expected seismic risk in northern part of the Taiwan Strait is lower than that in middle and southern part. The suggested northern route of the Taiwan Strait passage project seems to be relatively save seismically.     

青藏铁路冻土区路基工程安全可靠性监测技术研究

通过对冻土区路基工程和冻土之间相互作用过程的分析,提出冻土区路基工程的安全可靠性监测关键技术一是监测方法,二是监测手段,三是数据分析。冻土区路基工程的安全可靠性首先取决于工程周围和工程基底多年冻土的热稳定性,其次取决于发生变形的路基填土厚度及其基底融化层厚度。因此,路基顶面以下不同深度地温监测和年际冻融季节时段路基土层变形监测是冻土区工程长期可靠性监测的主要指标。青藏铁路自然条件的严酷性,要求监测手段具有可靠性和耐久性以及对复杂自然条件变化的适应性。文章提出一种自动观测多年冻土地温和路基变形,并能够实现数据无线传输的现场监测系统设计方案,通过现场试验,证明这种监测系统能够适应青藏高原恶劣的自然条件,减轻了人工监测的劳苦,具有可靠性和耐久性。作者还提出了能够简便判断冻土区工程安全可靠性的监测数据分析方法,对目前冻土区工程安全可靠性分析具有一定的理论指导作用。     

Monitoring and numerical analysis of behaviour of Miaojiaba concrete-face rockfill dam built on river gravel foundation in China

This study evaluated the behaviour of a concrete face rockfill dam (CFRD) built on river gravel foundation on the basis of in-situ measurement records and numerical analysis. The monitoring records were obtained from a detailed deformation-monitoring system. A 3D finite element analysis was performed to assess long-term dam behaviour. The behaviour of the CFRD built on river gravel foundation was analysed comprehensively. A discussion of behaviour, especially with relevance to the behaviour of dams built on stiff-foundation, was included. The effect of the river gravel foundation was analysed, and the exact mechanisms were discussed. The relative contribution of various factors on the long-term behaviour of the CFRD was also studied. In-situ measurements were compared with numerical results to discuss the capability of the numerical model to predict the dam behaviour.