Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.     

Oxygen isotopes composition of sapphires from the French Massif Central: implications for the origin of gem corundum in basaltic fields

Alluvial and colluvial gem sapphires are common in the basaltic fields of the French Massif Central (FMC) but sapphire-bearing xenoliths are very rare, found only in the Menet trachytic cone in Cantal. The O-isotope composition of the sapphires ranges between 4.4 and 13.9‰. Two distinct groups have been defined: the first with a restricted isotopic range between 4.4 and 6.8‰ (n = 22; mean δ¹⁸O = 5.6 ± 0.7‰), falls within the worldwide range defined for blue-green-yellow sapphires related to basaltic gem fields (3.0 < δ¹⁸O < 8.2‰, n = 150), and overlaps the ranges defined for magmatic sapphires in syenite (4.4 < δ¹⁸O < 8.3‰, n = 29). A second group, with an isotopic range between 7.6 and 13.9‰ (n = 9), suggests a metamorphic sapphire source such as biotite schist in gneisses or skarns. The δ¹⁸O values of 4.4–4.5‰ for the blue sapphire-bearing anorthoclasite xenolith from Menet is lower than the δ¹⁸O values obtained for anorthoclase (7.7–7.9‰), but suggest that these sapphires were derived from an igneous reservoir in the subcontinental spinel lherzolitic mantle of the FMC. The presence of inclusions of columbite-group minerals, pyrochlore, Nb-bearing rutile, and thorite in these sapphires provides an additional argument for a magmatic origin. In the FMC lithospheric mantle, felsic melts crystallized to form anorthoclasites, the most evolved peraluminous variant of the alkaline basaltic melt. The O-isotopic compositions of the first group suggests that these sapphires crystallized from felsic magmas under upper mantle conditions. The second group of isotopic values, typified for example by the Le Bras sapphire with a δ¹⁸O of 13.9‰, indicates that metamorphic sapphires from granulites were transported to the surface by basaltic magma.     

Glaciokarst landforms and processes of the southern Dinaric Alps

Glaciokarst is a landscape which combines karst features and hydrology as well as inherited glacial features. It is a result of glaciation upon a karst geomorphological system. The relationship between glaciers and karst is rather poorly known and inadequately recognized. This research focuses on three distinct karst areas along the Adriatic coast in the southern Dinaric Alps that were affected by the Quaternary glaciations. An insight into specific glaciokarst processes and surface features was provided through the study of the areas of the Lov?en, Orjen and Vele? Mountains. A glaciokarst geomorphology is in general well preserved due to the prevailing vertically oriented chemical denudation following de‐glaciation and almost the entire absence of other surface processes. Typical glacial erosional features are combined by a variety of depressions which are the result of a karstic drainage of sub‐glacial waters. The majority of glacial deposits occur as extensive lateral‐terminal moraine complexes, which are often dissected by smaller breach‐lobe moraines on the external side of the ridge. Those moraine complexes are likely to be a product of several glacial events, which is supported by complex depositional structures. According to the type of glacial depositional features, the glaciers in the study areas were likely to have characteristics of moraine‐dammed glaciers. Due to vertical drainage ice‐marginal fluvial processes were unable to evacuate sediment. Fluvial transport between glacial and pro‐glacial systems in karst areas is inefficient. Nevertheless, some sediment from the glacier margin is washed away by the pro‐glacial streams, filling the karst depressions and forming piedmont‐type poljes. Copyright © 2015 John Wiley & Sons, Ltd.     

Western Alpine back-thrusting as subsidence mechanism in the Tertiary Piedmont Basin (Western Po Plain, NW Italy)

Basin formation dynamics of the Tertiary Piedmont Basin (TPB) are here investigated by means of cross-section numerical modelling. Previous works hypothesised that basin subsidence occurred due first to extension (Oligocene) and then to subsequent loading due to back-thrusting (Miocene). However, structural evidence shows that the TPB was mainly under contraction from Oligocene until post Pliocene time while extension played a minor role. Furthermore, thermal indicators strongly call for a cold (flexure-induced) mechanism but are strictly inconsistent with a hot (thermally induced) mechanism. Our new modelling shows that the TPB stratigraphic features can be reproduced by flexure of a visco-elastic plate loaded by back-thrusts active in the Western Alps in Oligo-Miocene times. Far-field compression contributed to the TPB subsidence and controlled the basin infill geometry by enhancing basin tilting, forebulge uplift and erosion of the southern margin of the basin. These results suggest that the TPB subsidence is the result of a combination of mechanisms including thrust loading and far-field compressional stresses.     

Area balancing as a test of models for the deep structure of mountain belts,with specific reference to the Alps

Basic concepts of structural restoration are applied to crustal cross-sections through mountain belts to explore large-scale tectonic models and deep structure. However, restored sections should account for variations in pre-orogenic crustal thicknesses. Crustal balancing approaches are reviewed and applied to two Alpine sections, coinciding with deep seismic experiments: NRP-20 East (Central Alps) and ECORS-CROP (Western Alps). Existing studies assume large (>300 km) orogenic contraction and only moderately thinned pre-orogenic crust. The resulting restored sections contain more crust than is imaged beneath the present-day Alps, the missing crust generally assumed to be subducted. Two kinematic modifications reduce the requirement for subduction: thinning and buoyancy-driven return flow of ultra-high-pressure metamorphic rocks during orogenesis; and pre-orogenic hyperextension. Using large stretching factors for the pre-orogenic crust negates crustal subduction on both Alpine transects. If the lower crust was approximately rigid, restorations of the Central Alps require strongly depth-heterogeneous stretching of upper and lower crust during Mesozoic rifting. Relaxing this requirement allows uniform lithospheric stretching, a corollary consistent with published subsidence estimates. Restorations make implicit statements on the form of pre-orogenic basins and the structure of continental margins incorporated into mountain belts that can in turn provide tests of tectonic models.     

Les failles récentes des Grands-Moulins (Savoie) : un Sackung (tassement gravitaire) majeur dans les Alpes françaises

In Savoy, the Grands-Moulins recent fault scarps, previously interpreted as seismic fault ruptures, are in fact part of a major Sackung (deep seated gravitational spreading) of the French Alps (9 km long). We mapped more than 60 sackung scarps, some of them reaching 1330 m long and 30 m high. These antislope scarps stop the active screes and offset relict Dryassic rock glaciers by 16 m. We present geomorphologic observations attesting for their gravitational origin. This Sackung is primarily due to glacial debuttressing, while seismic shaking could be a triggering mechanism. To cite this article: J.-C. Hippolyte et al., C. R. Geoscience 338 (2006).     

Carbon isotope stratigraphy of Lochkovian to Eifelian limestones from the Devonian of central and southern Europe

Lower to Middle Devonian carbonates of the Prague Syncline, the Carnic Alps, the Montagne Noire, and the Cantabrian Mountains were investigated for δ¹³C_carb and δ¹³C_org. These values were measured on bulk rocks, selected components and cements. Many carbonates exhibit primary marine values, but some are altered by diagenesis. A δ¹³C curve can be presented for the latest Pridolian to Emsian time interval. Several sharp or broad positive excursions are obvious in the woschmidti-postwoschmidti, sulcatus, kitabicus, Late serotinus, and kockelianus conodont zones. The excursion at the Silurian–Devonian boundary is known worldwide and therefore considered global in nature. Some of the others are described for the first time from central and southern Europe, and their global nature has to be verified by further investigations in other regions. Most excursions relate to and/or started during major regressions whereas sea-level highstands correspond to minimal δ¹³C values. Similar relationships between sea-level changes and δ¹³C have been observed from other early Palaeozoic intervals. The transgressive Chote? (?) and Ka?ák events are marked by positive isotope excursions, this type of combination is usually observed in late Palaeozoic to Cenozoic black shale events.     

Channelized and hillslope sediment transport and the geomorphology of mountain belts

This paper uses the results of landscape evolution models and morphometric data from the Andes of northern Peru and the eastern Swiss Alps to illustrate how the ratio between sediment transport on hillslopes and in channels influences landscape and channel network morphologies and dynamics. The headwaters of fluvial- and debris-flow-dominated systems (channelized processes) are characterized by rough, high-relief, highly incised surfaces which contain a dense and hence a closely spaced channel network. Also, these systems tend to respond rapidly to modifications in external forcing (e.g., rock uplift and/or precipitation). This is the case because the high channel density results in a high bulk diffusivity. In contrast, headwaters where landsliding is an important sediment source are characterized by a low channel density and by rather straight and unstable channels. In addition, the topographies are generally smooth. The low channel density then results in a relatively low bulk diffusivity. As a consequence, response times are greater in headwaters of landslide-dominated systems than in highly dissected drainages. The Peruvian and Swiss case studies show how regional differences in climate and the litho-tectonic architecture potentially exert contrasting controls on the relative importance of channelized versus hillslope processes and thus on the overall geomorphometry. Specifically, the Peruvian example illustrates to what extent the storminess of climate has influenced production and transport of sediment on hillslopes and in channels, and how these differences are seen in the morphometry of the landscape. The Swiss example shows how the bedding orientation of the bedrock drives channelized and hillslope processes to contrasting extents, and how these differences are mirrored in the landscape. An erratum to this article can be found at     

Crustal structure of the Alpine–Pannonian transition zone: a combined seismic and gravity study

 The crustal structure of the transition zone between the Eastern Alps and the western part of the Pannonian depression (Danube basin) is traditionally interpreted in terms of subvertical Tertiary strike-slip and normal faults separating different Alpine tectonic units. Reevaluation of approximately 4000-km-long hydrocarbon exploration reflection seismic sections and a few deep seismic profiles, together with data from approximately 300 wells, suggests a different structural model. It implies that extensional collapse of the Alpine orogene in the Middle Miocene was controlled by listric normal faults, which usually crosscut Alpine nappes at shallow levels, but at depth merge with overthrust planes separating the different Alpine units. The alternative structural model was tested along a transect across the Danube basin by gravity model calculations, and the results show that the model of low-angle extensional faulting is indeed viable. Regarding the whole lithosphere of the western Pannonian basin, gravity modelling indicates a remarkable asymmetry in the thickness minima of the attenuated crust and upper mantle. The approximately 160 km lateral offset between the two minima suggests that during the Miocene extension of the Pannonian basin detachment of the upper crust from the mantle lithosphere took place along a rheologically weak lower crust. Received: 13 July 1998 / Accepted: 18 March 1999