Relief-rejuvenation and topographic length scales in a fluvial drainage basin, Napf area, Central Switzerland

This paper explores how, and to what extent, a phase of relief-rejuvenation modifies the mode of surface erosion in an approximately 63 km² drainage basin located at the northern border of the Swiss Alps (Luzern area). In the study area, the retreat of the Alpine glaciers at the end of the Last Glacial Maximum (LGM) caused base level to lower by approximately 80 m. The fluvial system adapted to the lowered base level by headward erosion. This is indicated by knickzones in the longitudinal stream profiles and by the continuous upstream narrowing of the width of the valley floor towards these knickzones. In the headwaters above these knickzones, processes are still to a significant extent controlled by the higher base level of the LGM. There, frequent exposure of bedrock in channels and especially on hillslopes implies that sediment flux is to a large extent limited by weathering rates. In the knickzones, however, exposure of bedrock in channels implies that sediment flux is supply-limited, and that erosion rates are controlled by stream power.The morphometric analysis reveals the existence of length scales in the topography that result from distinct geomorphic processes. Along the tributaries where the upstream sizes of the drainage basins exceed 100,000–200,000 m², the mode of sediment transport and erosion changes from predominantly hillslope processes (i.e., landsliding, creep of regolith, rock avalanches and to some extent debris flows) to processes in channels (fluvial processes and debris flows). This length scale reflects the minimum size of the contributing area for channelized processes to take over in the geomorphic development (i.e., threshold size of drainage basin). This threshold size depends on the ratio between production rates of sediment on hillslopes, and export rates of sediment by processes in channels. Consequently, in the headwaters, erosion rates and sediment flux, and hence landscape evolution rates, are to a large extent limited by weathering processes. In contrast, in the lower portion of the drainage basin that adjusts to the lowered base-level, rates of channelized erosion and relief formation are controlled mainly by stream power. Hence, this paper shows that base-level lowering, headward erosion and establishment of knickzones separate drainage basins in two segments with different controls on rates of surface erosion, sediment flux and relief formation.     

Response of active tectonics on the alluvial Baghmati River, Himalayan foreland basin, eastern India

Active tectonics in a basin plays an important role in controlling a fluvial system through the change in channel slope. The Baghmati, an anabranching, foothills-fed river system, draining the plains of north Bihar in eastern India has responded to ongoing tectonic deformation in the basin. The relatively flat alluvial plains are traversed by several active subsurface faults, which divide the area in four tectonic blocks. Each tectonic block is characterized by association of fluvial anomalies viz. compressed meanders, knick point in longitudinal profiles, channel incision, anomalous sinuosity variations, sudden change in river flow direction, river flow against the local gradient and distribution of overbank flooding, lakes, and waterlogged area. Such fluvial anomalies have been identified on the repetitive satellite images and maps and interpreted through DEM and field observations to understand the nature of vertical movements in the area. The sub-surface faults in the Baghmati plains cut across the river channel and also run parallel which have allowed us to observe the effects of longitudinal and lateral tilting manifested in avulsions and morphological changes.     

Diagenetic paths in the margin of a Triassic Basin: NW zone of the Iberian Chain, Spain

Buntsandstein deposits generated in a slowly subsiding basin on the western margin of the Iberian Chain are represented by a stratigraphic succession of fluvial deposits less than 100 m thick (conglomerates, sandstones, and shales). Diagenetic processes in sandstones can be grouped as eodiagenetic, mesodiagenetic, and telodiagenetic. Eodiagenesis can be associated with Muschelkalk, Keuper, and probably early Jurassic times. Mesodiagenesis is probably related to Jurassic times. Diagenetic chemical reactions suggest a maximum burial less than 1.5 km and low temperatures (<120°C). Patterns of porosity reduction by compaction and cementation suggest four diagenetic stages: (1) Loss of primary porosity by early mechanical compaction; (2) early cementation (K-feldspar and dolomite); (3) dissolution of cements; and (4) framework collapse by re-compaction. These stages are manifested by the presence of two types of sandstone. Type I sandstones present high intergranular volume (mean, 30%). Type II sandstones are characterized by high compactional porosity loss and exhibit low values of intergranular volume (mean, 16.9%). Type II sandstones are associated with the dissolution of cement and later re-compaction of type I sandstones. An intermediate telodiagenetic phase is deduced and related to the sharp unconformity between Lower Cretaceous sediments and the underlying sediments. This suggests that a mechanically unstable framework collapsed during the Cretaceous, generating type II sandstones. The analyzed diagenetic paths have a wide applicability on similar marginal areas of rift basins.     

The Molí del Baró-1 site,a diverse fossil assemblage from the uppermost Maastrichtian of the southern Pyrenees (north-eastern Iberia)

The Molí del Baró-1 site (north-eastern Iberia) has yielded one of the richest fossil assemblages of the continental upper Maastrichtian from western Europe. It includes abundant plant (charophytes, sporomorphs, angiosperm leaves, seeds and logs), invertebrate (mollusc shells, partial insect exoskeletons and eggs) and vertebrate (teeth, bones, eggshells) fossils. The fossil assemblage is composed of both parautochthonous and allochthonous remains that mostly deposited in a pool formed at the edge of a meandering river. Plant megafossil evidence suggest that at least three angiosperm species (a willow-like dicot, palms and a likely typhacean monocot) formed the plant community growing in this fluvial environment. Tooth remains indicate that crocodylomorphs were diverse (including atoposaurids, ziphosuchians and eusuchians) which together with small theropod dinosaurs likely consumed prey carcasses or scavenged near the depositional setting. Prismatoolithid eggshells also suggest the presence of nearby nesting area of theropods. On the other hand, hadrosauroids apparently dominated phytophagous faunas including lambeosaurines as well as more basal forms. The taxonomic composition of the Molí del Baró-1 site matches the expected for the timespan and environment and represents a relevant locality to know the diversity of the latest Cretaceous terrestrial ecosystems in south western Europe.     

热稳定κ-卡拉胶酶产生菌Bacillus sp. Car19的发酵条件优化

对一株分泌热稳定κ-卡拉胶酶印尼热泉菌进行了种属鉴定, 并采用响应面法对该菌发酵产酶条件进行了优化。鉴定结果表明, 该菌株属于芽孢杆菌属(Bacillus), 命名为Bacillus sp. Car19(GeneBank: KT865196)。发酵条件优化结果显示, 9个环境因子影响Bacillus sp. Car19产酶量。其中影响Bacillus sp. Car19产酶量的三个主要因素分别为培养温度、培养基中Cu²⁺浓度和培养基中NaCl浓度。综合次要因素对Bacillus sp. Car19产酶影响, Bacillus sp. Car19最佳产酶发酵条件为: 培养温度52.31℃、Cu²⁺浓度6.93 mmol/L、NaCl浓度37.03 g/L, 培养基pH为6, 接种量1%, 培养时间36h, 半乳糖浓度0.3 g/L,硝酸铵浓度7g/L, 卡拉胶浓度0.5g/L。优化后发酵上清液酶活力达到15.21 U/mL, 与优化前相比提高了1.5 倍。     

Shaler: in situ analysis of a fluvial sedimentary deposit on Mars

This paper characterizes the detailed sedimentology of a fluvial sandbody on Mars for the first time and interprets its depositional processes and palaeoenvironmental setting. Despite numerous orbital observations of fluvial landforms on the surface of Mars, ground‐based characterization of the sedimentology of such fluvial deposits has not previously been possible. Results from the NASA Mars Science Laboratory Curiosity rover provide an opportunity to reconstruct at fine scale the sedimentary architecture and palaeomorphology of a fluvial environment on Mars. This work describes the grain size, texture and sedimentary facies of the Shaler outcrop, reconstructs the bedding architecture, and analyses cross‐stratification to determine palaeocurrents. On the basis of bedset geometry and inclination, grain‐size distribution and bedform migration direction, this study concludes that the Shaler outcrop probably records the accretion of a fluvial barform. The majority of the outcrop consists of large‐scale trough cross‐bedding of coarse sand and granules. Palaeocurrent analyses and bedform reconstruction indicate that the beds were deposited by bedforms that migrated towards the north‐east, across the surface of a bar that migrated south‐east. Stacked cosets of dune cross‐bedding suggest aggradation of multiple bedforms, which provides evidence for short periods of sustained flow during Shaler deposition. However, local evidence for aeolian reworking and the presence of potential desiccation cracks within the outcrop suggest that fluvial deposition may have been intermittent. The uppermost strata at Shaler are distinct in terms of texture and chemistry and are inferred to record deposition from a different sediment dispersal system with a contrasting provenance. The outcrop as a whole is a testament to the availability of liquid water on the surface of Mars in its early history.     

《巴黎协定》实施细则适应议题焦点解析及后续中国应对措施

适应是《联合国气候变化框架公约》及其《巴黎协定》下的重要谈判内容。2018年12月举行的第24次缔约方大会（COP24）就适应议题后续实施方案达成了共识,为全球气候治理带来新的机遇和挑战。中国在未来全球气候治理中,如何借助新成果推动国内适应工作稳步发展,积极发挥中国作用,是新形势下亟需考虑的重要问题。基于此,本文梳理了适应议题的焦点问题、各集团和缔约方的立场观点,展望了2019—2025年适应相关议题主要工作安排,并对此提出了中国未来适应领域完成相关工作需要考虑的应对措施建议,包括：(1)深入分析国际信息报告体系与国内信息的联系,梳理国内适应工作亮点,为构建高质量报告奠定基础;(2)构建跨部门跨地区协作机制,加强信息搜集与完善,有效提高数据和信息统计功能;(3)强化气候变化适应技术、规范、标准等科学研究的作用,为制定政策规定时纳入相应技术要求、提高政策规定等需求提供科学性和可操作性的服务。     

Allocycles and Autocycles in the Upper Part of the Limestone Coal Group (Pendleian E1) in the Glasgow–Stirling Region of the Midland Valley of Scotland

The upper part of the Limestone Coal Group (Pendleian E₁), between the major marine transgressions of the Black Metals and the Index Limestone, represents an early example of ‘coal measures’ facies. It comprises a distal and a proximal facies association. The distal facies association, which was subject to relatively strong marine influences and included both deltaic and fluvial elements, is characterized by a regular ‘layer-cake’ succession with laterally-persistent lithological members. By contrast, the proximal association, which was more subject to fluvial influences and is typified by the variable Bannockburn Main Complex, is characterized by abrupt lateral changes in lithofacies. The distal facies association is dominant in the west of the Kilsyth Trough, but proximal facies intercalations increase eastwards, so that they constitute a fairly high proportion of the succession in the Kincardine Basin, particularly in areas of locally-increased tectonic subsidence that were frequently occupied by major channel belts. Some of the sheet sandstones within the distal association have a lower, upward-coarsening portion succeeded by a coarser-grained, erosive-based, upward-fining portion. The resulting ‘two-storey’ profile may reflect deltaic sand bodies having been suceeded by fluvial sand bodies, following a general fall in base level. Linear regression lines showing the relationship between the number of horizons colonized by vegetation and net subsidence, suggest that local autocyclic, tectonosedimentary processes, such as delta switching, channel migration, and avulsion, were superimposed upon a widespread allocyclic, probably glacial-eustatic, process. The former processes were most effective within the proximal facies association and in the Kincardine Basin and the latter in the distal association and the Kilsyth Trough.     

Effect of food quality on energy uptake

The dynamic energy budget (DEB) theory assumes that the feeding of an organism in relation to food density follows the type-II functional response when food consists of purely digestible organic matter. However when faced with a food source high in inorganic content, an organism needs to adapt physiologically to maximise organic extraction. Indeed filter-feeding marine bivalves inhabiting turbid coastal waters cope with large fluctuations in food quality by selectively ingesting and pseudofaeces production. Data from feeding experiments with the New Zealand greenshell mussel Perna canaliculus have demonstrated that inorganic particles contribute some uncertainty to the estimate of the half-saturation coefficient. Incorporating inorganic matter into the functional response would improve the prediction of energy uptake.     

Distribution of diagenetic alterations within depositional facies and sequence stratigraphic framework of fluvial sandstones: Evidence from the Petrohan Terrigenous Group,Lower Triassic,NW Bulgaria

Sequence stratigraphy of fluvial deposits is a controversial topic because changes in relative sea level will eventually have indirect impact on the spatial and temporal distribution of depositional facies. Changes in the relative sea level may influence the accommodation space in fluvial plains, and hence have impact on types of fluvial system, frequency of avulsion, and style of vertical and lateral accretion. This study aims to investigate whether depositional facies and changes in the fluvial system of the Lower Triassic Petrohan Terrigenous Group sandstones (NW Bulgaria) in response to changes in the relative sea level have an impact on the spatial and temporal distribution of diagenetic alterations.