辽西地区北票组烃源岩生物标志化合物特征的差异性

北票组是辽西地区重要的一套煤系地层,被认为是该区油气勘探的重要目的层.坤头营子剖面和卧龙剖面是该区较为有代表性的北票组地层剖面,对于研究北票组的沉积环境、有机质来源等具有重要意义.采用气相色谱-质谱（GC-MS）等技术对2个剖面的烃源岩样品进行了分析测试,结果显示两组样品表现出不同的地球化学特征.坤头营子剖面的烃源岩样品抽提物正构烷烃的质量色谱图均为单峰态,主峰碳数以C₁₉为主,姥鲛烷/植烷比值（Pr/Ph）在3.0~4.0之间;甾烷系列中以C₂₉甾烷为优势,C₂₃三环萜烷含量相对较低,伽马蜡烷指数低（平均0.08）.取自卧龙剖面的样品质量色谱图大部分呈现双峰态,Pr/Ph值低;甾烷系列中C₂₇占优势,萜烷系列中C₂₃三环萜烷含量高,具有较高的伽马蜡烷含量（平均0.23）,且各项生标成熟度参数均已达到异构平衡化阶段.结合样品的全岩分析显微组分分析结果,认为两者主要差异可能是剖面附近的侵入岩造成,北票组烃源岩有机质具有陆源高等植物和低等水生生物双重来源,以陆源高等植物为主.     

三江盆地前进坳陷油气地质调查新进展

随着东北大型含油气沉积盆地油气勘探难度越来越大,老油田开发程度已进入中后期,亟需新的油气区接替。三江盆地作为松辽盆地外围7个一级远景盆地之一,具有较大的油气勘探潜力。最近在三江盆地前进坳陷开展了一系列油气地质调查工作,在中生界泥页岩、晚古生界暗色泥岩地层及硅质岩生烃潜力方面取得了新的进展与认识,对评价该区油气资源潜力、进行下一步油气勘探工作具有重要意义。     

Occurrence and conceptual sedimentary model of Cambrian gypsum-bearing evaporites in the Sichuan Basin,SW China

During the Cambrian, gypsum-bearing evaporites formed in the Sichuan Basin, SW China. These rocks are important for oil and gas sealing, but details of their distribution and origin are not well established. This study examines the regional distribution and origin of the gypsum-bearing evaporites using a comprehensive analysis of drilling data from 34 wells, 5 measured cross-sections in the basin and surrounding area, and 96 maps of area-survey data. Results show that in the stratigraphic succession, the gypsum-bearing evaporites occur mainly in the Lower Cambrian Longwangmiao Formation, the Middle Cambrian Douposi Formation, and the Middle-Upper Cambrian Xixiangchi Group. Geographically, the rocks are found mainly in the southeastern part of the basin, and the distribution of deposits shows an overall SW-NE trend. The sedimentary environments for evaporite formation were evaporative lagoon and inter-platform basin in a platform setting. Gypsum was generated by the underwater concentration of sea water in a strongly evaporative environment. Both an evaporative restricted platform and a mixeddeposition restricted platform model appear to be applicable to the development of gypsum in the Sichuan Basin. The gypsum-bearing evaporites with the best sealing capacity are located mostly in the southeastern part of the basin. These constraints can be applied directly to regional exploration, and have implications for the regional paleogeography and paleoclimate.     

The geothermal formation mechanism in the Gonghe Basin: Discussion and analysis from the geological background

The Gonghe Basin, a Cenozoic down-warped basin, is located in the northeastern part of the Qinghai-Xizang (Tibetan) Plateau, and spread over important nodes of the transfer of multiple blocks in the central orogenic belt in the NWW direction. It is also called “Qin Kun Fork” and “Gonghe Gap”. The basin has a high heat flow value and obvious thermal anomaly. The geothermal resources are mainly hot dry rock and underground hot water. In recent years, the mechanism of geothermal formation within the basin has been controversial. On the basis of understanding the knowledge of predecessors, this paper proposes the geothermal formation mechanism of the “heat source–heat transfer–heat reservoir and caprock–thermal system” of the Gonghe Basin from the perspective of a geological background through data integration-integrated research-expert, discussion-graph, compilation-field verification and other processes: (1) Heat source: geophysical exploration and radioisotope calculations show that the heat source of heat in the basin has both the contribution of mantle and the participation of the earth’s crust, but mainly the contribution of the deep mantle. (2) Heat transfer: The petrological properties of the basin and the exposed structure position of the surface hot springs show that one transfer mode is the material of the mantle source upwells and invades from the bottom, directly injecting heat; the other is that the deep fault conducts the deep heat of the basin to the middle and lower parts of the earth’s crust, then the secondary fracture transfers the heat to the shallow part. (3) Heat reservoir and caprock: First, the convective strip-shaped heat reservoir exposed by the hot springs on the peripheral fault zone of the basin; second, the underlying hot dry rock layered heat reservoir and the upper new generation heat reservoir and caprock in the basin revealed by drilling data. (4) Thermal system: Based on the characteristics of the “heat source-heat transfer-heat reservoir and caprock”, it is preliminarily believed that the Gonghe Basin belongs to the non-magmatic heat source hydrothermal geothermal system (type II2₁) and the dry heat geothermal system (type II2₂). Its favorable structural position and special geological evolutionary history have given birth to a unique environment for the formation of the geothermal system. There may be a cumulative effect of heat accumulation in the eastern part of the basin, which is expected to become a favorable exploration area for hot dry rocks.     

基于航空重磁特征对突泉盆地构造的认识

为获取突泉盆地航空物探基础地质资料,为油气调查评价提供参考,中国国土资源航空物探遥感中心在该盆地开展了1:10万航空重磁综合调查工作。利用最新的航空重磁资料及实测岩石物性数据,对突泉盆地及其邻区重磁异常特征进行研究,分析航空重磁异常与地层展布、断裂活动、岩浆岩体的分布关系,重点探讨盆地的基底性质。结果表明,研究区航空重力异常与航磁异常在强度、范围、形态、梯度和走向等方面具有一定的规律性,该区断裂体系分布与重磁场特征明显相关,NNE-NE向、NW向及NE向3组断裂明显控制盆地沉积岩体及岩浆岩体的展布,盆地基底由下古生界浅变质岩系和前古生界中等变质岩系构成。     

Depositional setting,provenance, and tectonic-volcanic setting of Eocene–Recent deep-sea sediments of the oceanic Izu–Bonin forearc,northwest Pacific (IODP Expedition 352)

New biostratigraphical, geochemical, and magnetic evidence is synthesized with IODP Expedition 352 shipboard results to understand the sedimentary and tectono-magmatic development of the Izu–Bonin outer forearc region. The oceanic basement of the Izu–Bonin forearc was created by supra-subduction zone seafloor spreading during early Eocene (c. 50–51 Ma). Seafloor spreading created an irregular seafloor topography on which talus locally accumulated. Oxide-rich sediments accumulated above the igneous basement by mixing of hydrothermal and pelagic sediment. Basaltic volcanism was followed by a hiatus of up to 15 million years as a result of topographic isolation or sediment bypassing. Variably tuffaceous deep-sea sediments were deposited during Oligocene to early Miocene and from mid-Miocene to Pleistocene. The sediments ponded into extensional fault-controlled basins, whereas condensed sediments accumulated on a local basement high. Oligocene nannofossil ooze accumulated together with felsic tuff that was mainly derived from the nearby Izu–Bonin arc. Accumulation of radiolarian-bearing mud, silty clay, and hydrogenous metal oxides beneath the carbonate compensation depth (CCD) characterized the early Miocene, followed by middle Miocene–Pleistocene increased carbonate preservation, deepened CCD and tephra input from both the oceanic Izu–Bonin arc and the continental margin Honshu arc. The Izu–Bonin forearc basement formed in a near-equatorial setting, with late Mesozoic arc remnants to the west. Subduction-initiation magmatism is likely to have taken place near a pre-existing continent–oceanic crust boundary. The Izu–Bonin arc migrated northward and clockwise to collide with Honshu by early Miocene, strongly influencing regional sedimentation.     

Middle Jurassic–Early Cretaceous tectonic evolution of the Bayanhushuo area,southern Great Xing’an Range,NE China: constraints from zircon U–Pb geochronological and geochemical data of volcanic and subvolcanic rocks

This study presents new zircon U–Pb geochronology, geochemistry, and zircon Hf isotopic data of volcanic and subvolcanic rocks that crop out in the Bayanhushuo area of the southern Great Xing’an Range (GXR) of NE China. These data provide insights into the tectonic evolution of this area during the late Mesozoic and constrain the evolution of the Mongol–Okhotsk Ocean. Combining these new ages with previously published data suggests that the late Mesozoic volcanism occurred in two distinct episodes: Early–Middle Jurassic (176–173 Ma) and Late Jurassic–Early Cretaceous (151–138 Ma). The Early–Middle Jurassic dacite porphyry belongs to high-K calc-alkaline series, showing the features of I-type igneous rock. This unit has zircon ε_Hf(t) values from +4.06 to +11.62 that yield two-stage model ages (T_DM2) from 959 to 481 Ma. The geochemistry of the dacite porphyry is indicative of formation in a volcanic arc tectonic setting, and it is derived from a primary magma generated by the partial melting of juvenile mafic crustal material. The Late Jurassic–Early Cretaceous volcanic rocks belong to high-K calc-alkaline or shoshonite series and have A₂-type affinities. These volcanics have ε_Hf(t) and T_DM2 values from +5.00 to +8.93 and from 879 to 627 Ma, respectively. The geochemistry of these Late Jurassic–Early Cretaceous volcanic rocks is indicative of formation in a post-collisional extensional environment, and they formed from primary magmas generated by the partial melting of juvenile mafic lower crust. The discovery of late Mesozoic volcanic and subvolcanic rocks within the southern GXR indicates that this region was in volcanic arc and extensional tectonic settings during the Early–Middle Jurassic and the Late Jurassic–Early Cretaceous, respectively. This indicates that the Mongol–Okhotsk oceanic plate was undergoing subduction during the Early–Middle Jurassic, and this ocean adjacent to the GXR may have closed by the Late Middle Jurassic–Early Late Jurassic.     

Early Carboniferous ophiolite in central Qiangtang,northern Tibet: record of an oceanic back-arc system in the Palaeo-Tethys Ocean

Zircon U–Pb dating of two samples of metagabbro from the Riwanchaka ophiolite yielded early Carboniferous ages of 354.4 ± 2.3 Ma and 356.7 ± 1.9 Ma. Their positive zircon εHf(t) values (+7.9 to +9.9) indicate that these rocks were derived from a relatively depleted mantle. The metagabbros can be considered as two types: R1 and R2. Both types are tholeiitic, with depletion of high-field-strength elements (HFSE) and enrichment of large-ion lithophile elements (LILE) similar to those of typical back-arc basin basalts (BABB), such as Mariana BABB and East Scotia Ridge BABB. Geochemical and isotopic characteristics indicate that the R1 metagabbro originated from a back-arc basin spreading ridge with addition of slab-derived fluids, whereas the R2 metagabbro was derived from a back-arc basin mantle source, with involvement of melts and fluids from subducted ocean crust. The Riwanchaka ophiolite exhibits both mid-ocean ridge basalts- and arc-like geochemical affinities, consistent with coeval ophiolites from central Qiangtang. Observations indicate that the Qiangtang ophiolites developed during the Late Devonian–early Carboniferous (D₃–C₁) in a back-arc spreading ridge above an intra-oceanic subduction zone. Based on our data and previous studies, we propose that an oceanic back-arc basin system existed in the Longmuco–Shuanghu–Lancang Palaeo-Tethys Ocean during the D₃–C₁ period.     

Down‐slope facies variability within deep‐water channel systems: Insights from the Upper Cretaceous Cerro Toro Formation,southern Patagonia

In southern Patagonia, outcrops of the Upper Cretaceous Cerro Toro Formation preserve a >150 km long deep‐water axial channel belt in the Magallanes–Austral Basin, providing a unique opportunity to investigate longitudinal variations in the depositional characteristics of a deep‐water channel system. This study documents sedimentological, stratigraphical and geochronological data from the Cerro Toro Formation in the Argentine sector of the basin. New results are integrated with previous work from the Chilean basin sector to conduct a basin‐scale comparison of the timing of deposition, provenance and lithofacies proportions. The Cerro Toro channel belt includes a nearly 1000 m thick section characterized by high‐density turbidites and mass‐wasting deposits. Two ash beds from the base of the section yield U–Pb zircon ages of 90·4 ± 2 Ma and 88·0 ± 3 Ma, indicating similar initiation ages as documented in the Chilean sector. The U–Pb detrital zircon age spectra from samples in the study area reveal similar provenance trends to samples from the Chilean basin sector, with peak age populations at 310 to 260 Ma, 160 to 135 Ma and 110 to 82 Ma. The maximum depositional age of the channel belt in the Argentine sector is 87·8 ± 1·5 Ma and all new geochronology data corroborate an 86 to 80 Ma depositional age for the main Cerro Toro channel belt. Statistical analyses of 7370 beds from nearly 8000 m of new and previously published stratigraphic sections along the entire outcrop belt suggest progressive variations in the down‐system proportion of lithofacies. In the up‐slope region, lithofacies representing mass wasting processes (for example, debris‐flow and mass‐transport deposits) account for ca 29% of the stratigraphic thickness, as opposed to 5% in the down‐slope region of the channel belt, where turbidity current deposits are more prevalent. The proportion of beds >1 m thick also decreases systematically down slope, particularly for conglomeratic turbidite deposits. This work highlights that: (i) the proportion of thick beds and distribution of lithofacies are key down‐system changes in the stratigraphic fill of this deep‐water channel belt; (ii) detrital zircon trends suggest a relatively well‐mixed longitudinal depositional system; and (iii) geochronology of the main Cerro Toro outcrop belt supports but does not necessitate the model of a single, roughly age‐equivalent, channel system. This study has implications for understanding the downslope variability in depositional processes, stratigraphic architecture and reservoir quality of submarine channel systems.