自重固结与土层的固结状态初探

介绍了沉积厚度与时问平方根和沉积厚度与时间呈直线关系、底面不排水时沉积过程中固结的Gibson理论解答以及不考虑沉积时固结作用、底面不排水时沉积后自重固结的Terzaphi理论解答，据此分析了上述两种沉积模式不同沉积速率时目前仍处于沉积过程的土层的固结状态，求算出了停止沉积后土层固结所需的最长时问，指出业已停止沉积数百年以上的土层一般不应处于欠固结状态。     

地裂缝灾害研究现状与展望

1927年美国首先发现地裂缝以来，各国学者对地裂缝的发生、发展进行了细致的研究。美国学者首先从地震研究入手，认为地裂缝的形成受构造因素影响。后逐渐加强研究地下水超采对地裂缝的影响，形成了构造与地下水开采复合成因观点。我国学者重点对汾渭地堑地裂缝成因问题进行了较系统的研究，提出几种成因机理模型，并用GIS技术建立简单的预测预报系统。文章在详细介绍国内、外对地裂缝成因机理和水文特性的研究以及预测、预报工作的同时，对今后研究趋势进行了展望。目前，地裂缝的研究正从以往的定性静态描述转向以过程为目标的精确定量动力学研究。利用相似材料模拟地裂缝的形成与发展，以非线性理论（如分形）对地裂缝系统进行定量的数学描述，建立准确的预测、预报模型（如人工神经网络模型），并与GIS相结合，建立完善的预测、预报系统，减少地裂缝灾害对环境的影响，进而对它加以利用，是今后地裂缝研究的主要方向。     

中国南北地震带北段近期地应力场动态演化特征与地震活动之关系

分析了南北地震带北段多年来应力场的动态变化特征，并结合其他前兆手段观测资料研究了应力场动态变化与地震活动的关系，探讨了应力场变化的动力成因和利用其进行地震预测的可能性。     

A critical state interpretation for the cyclic liquefaction resistance of silty sands

Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p₀<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.     

多因素复杂系统最佳因素权重确定的一种新思路——以深港西部通道工程深圳湾公路大桥为例

为了客观地反映各因素对目标问题的影响程度,本文首次提出了最佳因素权重概念。定义最佳因素权重为研究区域内系统质量处于极限状态时的各因素权重之组合。结合深港西部通道工程深圳湾公路大桥桥址比选方案,详细说明了本方法的研究思路及其确定方法。通过最佳因素权重方法,能客观地、定量地确定出多因素复杂系统中的最优场址。     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。     

柯树背岩体的副矿物特征及地质意义

本文详细研究了柯树背岩体的岩石学及副矿物学特征，研究发现F9大断裂以西部分(西体)与F9大断裂以东部分(东体)在岩性、矿物组成、副矿物特征、锆石群型特征上存在很大差别，副矿物特征、锆石群型特征指示东体与寨背岩体类似，为同熔系列花岗岩；西体为重熔再生岩浆成因的改造型花岗岩。这一认识对于该区的铀金找矿具有一定的指导意义。     

一种在异构系统中实现负载平衡的方法

提出了在异构系统实现负载平衡的区域分解算法和实现负载平衡的计算方法，利用它的负反馈性质解决了异构系统处理机计算速度测量误差造成的负载测量不准问题，并对处理机速度变化，速度测量误差、处理机数量、网格点计算量的分布等因素的影响进行了计算，结果表明本方法具有很强的平衡负载能力和较强的适应性；根据计算结果提出了解决模式网格点计算量不易测量问题的解决方案，并用扩散方程和模拟物理过程进行试验，试验表明这种方法是可行的，平衡负载的效果十分显著。     

桩端沉降测量对试桩成果分析的意义

桩端沉降测量和试桩资料的分析结果表明,桩在传递上部荷载与地基土之间产生的应力应变过程,表现为桩的弹性杆件和地基土的弹—塑性变形特征。从而对受荷桩,尤其是长柱和超长桩的应力应变特征有了更切合实际的认识。