6 000 a BP以来长江下游地区古洪水与气候变化关系初步研究

通过对埋藏古树、泥炭、以及海相贝壳测年资料进行搜集和整理，结果表明：长江下游地区6000 a BP以来古洪水的发生与气候变化有着密切的联系。由于长江下游地区地势低平这一地貌特点，使得海面变化对于研究区洪水发生有着重要的影响，气候变化导致的海面上升对长江下游河段径流的顶托作用导致河流上溯以及地面排水不畅，致使洪水发生频率加大以及洪水危害的程度加强，出现“小水大灾”的现象，长江三角洲地区古洪水发生频率与美洲地区古洪水发生频率的对比研究表明，长江三角地区乃至整个长江流域在大的气候变化趋势上与全球其它地区是相似的，既有全球气候变化特点的同时又具有区域响应的特点，这对于未来研究区洪水发生的预测有着重要意义。     

Sea-level changes and hydrothermal sedimentary mineralization of large-superlarge ore deposits among Sinian to Triassic in South China

Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian,and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.     

GIS支持下珠江三角洲城镇建筑覆盖变化遥感监测分析

从珠江三角洲区域总体出发，探讨大范围城镇建筑覆盖变化的遥感监测方法。分析了城镇建筑覆盖变化专题信息提取方法概况，比较了最大似然法、上下文分类法、人工神经网络三种分类方法的优缺点。借助GIS技术的术持，在计算机自动分类的基础上利用专家知识改进了分类结果。根据遥感监测结果，对1988—1998年间珠江三角洲城镇建筑覆盖变化特征进行了分析。     

从卫星遥感全色图像中自动提取城市目标

提出了一种从卫星遥感全色图像中自动提取城市目标的方法。在总结城市目标的卫星遥感全色图像特性的基础上 ,设计了一种层次提取的方法。首先在低分辨率图像中提取城市目标的候选区域 ;接着在候选区域内利用城市目标一些更复杂的特性在高分辨率图像中证实城市目标。为了获得城市目标的边界 ,提出了一种基于边缘点密度的算法 ,并将算法应用去提取SPOT图像中的城市目标 ,取得了较好的试验结果     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

巴州农区气候变化及其对农业生产的影响

分析了1960—2001年巴州农区年、季平均温度、降水的变化，结果表明：各地气候变化并不一致，大部分地区有温度升高、降水偏多的趋势。冬季的升温幅度明显大于其它季节，年平均温度的上升主要由冬季升温所致。     

一种在异构系统中实现负载平衡的方法

提出了在异构系统实现负载平衡的区域分解算法和实现负载平衡的计算方法，利用它的负反馈性质解决了异构系统处理机计算速度测量误差造成的负载测量不准问题，并对处理机速度变化，速度测量误差、处理机数量、网格点计算量的分布等因素的影响进行了计算，结果表明本方法具有很强的平衡负载能力和较强的适应性；根据计算结果提出了解决模式网格点计算量不易测量问题的解决方案，并用扩散方程和模拟物理过程进行试验，试验表明这种方法是可行的，平衡负载的效果十分显著。     

塑膜温室油桃休眠期的温度变化

本文详尽分析了冰岛低压和大西洋高压的长期变化规律，发现两者均具有明显的阶段性变化，而且冰岛低压和大西洋高压的强度具有明显的反相关。同时，还分析了大西洋高压和冰岛低压与我国气候的关系，发现大西洋高压与我国冬季气温基本呈正相关，而冰岛低压与我国气温大致呈反相关，但均没有显著影响，所以两者都不是影响我国气候变化的重要天气系统。     

丽江7.0级地震重力前兆模式研究<

为了研究1996年丽江MＳ7.0地震前地震孕育过程或前兆表现，利用滇西地震实验场内高精度重复重力观测数据，结合地质调查和地球物理推断结果，并考虑到观测数据和模型粗差， 采用稳健或抗差-贝叶斯最小二乘算法和多断层位错模型，首次初步反演获得了研究区主要活动断裂滑动的时间变化分布．结果表明，1990～1997年断层运动的时间变化，较好地反映了1996年丽江MＳ7.0地震孕育过程．其主要前兆模式图象具有主震余震型特征，遵循地壳内部密度和地壳形变耦合运动模式（简称DD耦合运动模式）．      

丽江地震前后重力场变化的有限矩形位错模型分析

研究了用有限矩形位错模型计算地壳形变引起的地面重力场变化的方法．以丽江MＳ7.0地震为例，讨论了确定用于模型计算的断层面参数的原则，并给出了结果．计算和分析了不同类型位错引起的重力场变化图象特征，并与丽江地震前后观测到的重力场变化进行比较．结果表明，在发震断层有限范围内模型可解释同震重力场的变化，但模型对于更大空间范围上的重力场变化并不能给出很好地解释.