韧性剪切带的变形变质与同构造熔融作用——以中祁连地块宝库河韧性走滑剪切带为例

宝库河韧性剪切带是发育在中祁连地块北缘上的一条向北陡倾,走向近东西,宽约6 km的右行平移型韧性剪切带.剪切带内岩石原岩为泥质岩、基性岩和花岗岩,变质程度达角闪岩相,变形变质温度在685～763±46℃之间,压力在0.62～0.83±0.13 GPa范围内.其内长英质条带非常发育,规模变化较大,分布局部相对集中且受剪切带控制,走向与剪切带一致,平行于叶理,孤立无根,并在后期递进变形过程中发生不同程度的糜棱岩化、布丁化和褶皱,主要成分为长石和石英,明显不同于韧性剪切前或后侵入的花岗岩脉或岩体.长英质条带特征、REE配分模式及剪切带内岩石的变形变质温度说明剪切带内发育的长英质条带与基体是同源的,是在剪切应变过程中剪切热使围岩内部分物质发生动态熔融形成的,是同构造熔融作用的产物.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

Jurassic Dextral and Cretaceous Sinistral Movements Along the Hida Marginal Belt

The Hida marginal belt (HMB), which consists of various kinds of fault-bound blocks, is located between the continental massif of the Hida belt and the Mesozoic accretionary complex of the Mino belt in Central Japan. Detailed field investigation reveals that the HMB had grown through the two different movements, i.e., Jurassic dextral and Cretaceous sinistral movements. The Jurassic dextral ductile shear zones run in the southern marginal part of the Hida belt and the northern part of the HMB, whereas the Cretaceous sinistral cataclastic shear zones occur in the southern part of the HMB and the northern marginal part of the Mino belt. Geologic map and field evidence seem to suggest that the Jurassic dextral movement form the fault-bound blocks of the HMB to form the basic structure of the Hida marginal belt, i.e., formation of the ‘proto-HMB.’ Following the dextral movement, the sinistral one restructured the ‘proto-HMB’ to complete the present feature of the Hida marginal belt. The Cretaceous sinistral movement might result in the sinistral collision between the proto-HMB and the Mino belt.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

溪洛渡水电站坝址区岩体蠕变特性试验研究

介绍了溪洛渡水电站坝址区岩体柔性板法蠕变试验方法及试验结果,给出了岩体蠕变模型及其参数,为工程设计提供了参考依据。     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。     

基于统一强度理论的柱形孔扩张问题研究

考虑了岩土材料的软化和剪胀特性,利用空间轴对称问题的统一强度理论分析了柱形孔扩张问题,求出了岩土材料在柱形孔扩张时的应力场、应变场、位移场和最终扩张压力的统一解表达式。对蒋明镜-沈珠江扩孔公式从不同的方面作了论述。通过算例分析了岩土材料的软化和剪胀特性以及统一强度理论参数对应力场、位移场和扩张压力的影响。已有的关于该问题的Tresca解和Mohr-Coulomb解均为本文的一个特例。     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。