INELASTIC SEISMIC RESISTANCE OF REINFORCED CONCRETE STACK-LIKE STRUCTURES

A method is presented to quantify the inelastic seismic resistance of reinforced concrete stack-like structures by non-linear earthquake analysis. The deformed configuration of stack is idealized as an assemblage of beam elements and actual stress–strain relationships of concrete and reinforcing steel are used to evaluate element matrices. Repeated non-linear analyses are performed by gradually increasing the intensity of acceleration time histories to a level where collapse of the stack is observed in primary stresses. The set of time histories thus obtained are then used to define the ultimate intensity of ground motion that the stack can sustain if inelastic deformations are permitted. A procedure is presented to quantify the difference between inelastic seismic resistance and elastic seismic resistance in terms of displacement ductility capacity factors. For seismic design using available inelastic resistance, values of curvature ductility factor demand for the cross-sections of stacks are also presented. © 1997 by John Wiley & Sons, Ltd.     

国家地震烈度速报与预警工程定制软件总体设计

国家地震烈度速报与预警工程现已建设世界上规模最大的、总数超过15000个台站的地震烈度速报与预警观测站网。定制软件是预警工程的核心内容之一,将实现我国地震观测领域数据处理系统的全面升级。本文结合定制软件项目建设目标、业务功能需求等情况,从设计思路、总体架构、分系统功能、部署方式、性能指标和关键技术指标等方面对定制软件总体设计进行介绍。定制软件的总体设计契合预警业务功能需求,使得预警工程具备高稳定性、低延时、高可靠度、高处理性能的数据处理、紧急地震信息服务、数据综合服务和技术支持与保障能力,使地震预警和烈度速报两大功能得到落实,使工程项目的防震减灾效能得到切实体现。     

Higher-mode force response in multi-story strongback-braced frames

Strongback-braced frames employ an essentially elastic steel truss, or strongback, that distributes demands more uniformly to delay or prevent story mechanisms. Because inertial forces are no longer limited by the formation of a story mechanism, strongback-braced frames can exhibit large elastic force demands, particularly in the higher modes. This paper characterizes the higher-mode force response of strongback-braced frames. Four-story archetypes were designed using nonlinear dynamic analyses to incorporate higher-mode force demands into the design process. The response of the archetypes was compared with that of reference buckling-restrained braced frames that were allowed to form story mechanisms. The force demands in the strongback were then described using equivalent-static forces to represent the inertial forces induced by the higher modes. Force demands in the strongback arise from a yielding first-mode ‘pivoting’ and elastic higher-mode ‘bending’ response. These higher-mode force demands are elastic, ill-constrained by the strength of the yield mechanism, and depend significantly on the choice of ground motion record used for the analysis. In remaining elastic in the higher modes, the strongback distributes demands more uniformly and mitigates the formation of story mechanisms. Consequently, design and analysis methods for strongback-braced frames need to include estimates for these near-elastic higher-mode force demands.     

基于模拟退火算法的设计反应谱标定方法

反应谱的标定是抗震设计的基础工作之一,模拟退火算法是基于模拟固体退火过程而提出的多参数优化组合方法。本文提出将模拟退火算法应用于设计反应谱的标定,并概述了模拟退火算法的基本原理及特点,介绍了运用MATLAB基于模拟退火算法对反应谱进行标定的过程。检验了将模拟退火算法应用于场地相关谱标定的可行性和合理性,给出了将其应用于工程场地地震安全性评价中设计反应谱标定实例。通过检验和实例分析可以看出,基于模拟退火算法的反应谱标定方法所给出的设计反应谱谱形真实地反映了原地震反应谱的特征,较客观的反映了场地相关反应谱的峰值和周期特征。     

少筋混凝土重力式桥墩抗震研究现状

我国铁路桥梁普遍采用少筋混凝土重力式桥墩（配筋率<0.5%）,现有普通钢筋混凝土结构的延性抗震理论不适用于该类型桥墩。为了促进我国铁路重力式桥墩抗震理论的发展,详细论述了我国少筋混凝土重力式桥墩的研究现状和存在问题。首先,对少筋混凝土重力式桥墩的破坏特征及破坏机理进行了总结;其次,分析了各参数对少筋混凝土重力式桥墩抗震性能的影响;再次,对目前少筋混凝土重力式桥墩的抗震设计方法进行了汇总与分析;最后,对少筋混凝土重力式桥墩的数值分析模型进行了归纳与分析。通过对现有研究的汇总发现:目前对少筋混凝土重力式桥墩的试验研究主要以拟静力方法为主,还缺少振动台试验研究其动力状态下的破坏机理及抗震性能;少筋混凝土重力式桥墩的破坏机理及其与各影响因素之间的定量关系还不明确;已提出的少筋混凝土重力式桥墩的抗震设计方法存在塑性铰区计算不合理等问题,还需要进一步的完善。为少筋混凝土重力式桥墩抗震研究提供了方向。     

基于下一代性能设计理论的全概率抗震性能评估

对建筑物灾变发生时经济损失和人员伤亡情况做出准确预估是未来建筑结构设计初期需要努力的方向。基于下一代性能化设计理论,通过精细化建模和动力时程分析对结构进行易损性分析,并以此得到抗震性能评估所需的各类地震响应参数,建立RC框架结构全概率抗震性能评估方法。以云南大学力行楼为例,通过地震损失预测得到了该栋建筑的经济损失、修复时间和人员伤亡情况。该方法直观清晰地展示了结果,便于业主及非本专业从业者理解。     

Guidelines on the use of structure-from-motion photogrammetry in geomorphic research

As a topographic modelling technique, structure-from-motion (SfM) photogrammetry combines the utility of digital photogrammetry with a flexibility and ease of use derived from multi-view computer vision methods. In conjunction with the rapidly increasing availability of imagery, particularly from unmanned aerial vehicles, SfM photogrammetry represents a powerful tool for geomorphological research. However, to fully realize this potential, its application must be carefully underpinned by photogrammetric considerations, surveys should be reported in sufficient detail to be repeatable (if practical) and results appropriately assessed to understand fully the potential errors involved. To deliver these goals, robust survey and reporting must be supported through (i) using appropriate survey design, (ii) applying suitable statistics to identify systematic error (bias) and to estimate precision within results, and (iii) propagating uncertainty estimates into the final data products. © 2019 John Wiley & Sons, Ltd.     

钢筋沥青隔震层弹塑性设计研究

钢筋沥青隔震层施工简便、造价低廉,且具有较好的隔震性能,解决了广大村镇地区低矮房屋抗震能力普遍不足的缺点。但其工程设计方法尚不完善,如何进行隔震层弹塑性设计才能达到最好的隔震效果,目前尚不明确。本文介绍了钢筋沥青隔震层的构造,推导了隔震层竖向钢筋不发生第一类失稳和第二类失稳的条件,探讨了各设计参数的取值范围,提出了一种弹塑性设计思路:二阶段试算法。为便于该设计方法的应用,本文对一栋两层的砌体结构房屋进行了工程设计,验证该设计方法的适用性和可靠性。研究表明:合理使用该方法进行设计,水平减震系数可在0.5以下。     

大跨度钢管混凝土拱桥抗震性能指标研究

高轴压比钢管混凝土墩柱的试验结果对钢管混凝土拱肋具有较大的借鉴意义。为明确大跨度钢管混凝土拱桥的抗震性能指标,研究了高轴比钢管混凝土构件的破坏过程及延性性能。以弯矩作为性能指标将高轴压比钢管混凝土构件的试验破坏过程分为轻微损伤、有限损伤与严重损伤3个阶段,结合钢管混凝土截面性能状态的数值分析,探讨了高轴压比钢管混凝土构件的破坏机理。结果表明:高轴压比钢管混凝土构件具有一定的可用延性;提出了以计算等效屈服弯矩作为抗震性能指标,适当利用延性和实现钢管混凝土拱桥的有限损伤抗震设计,并给出了与有限损伤相关的截面性能状态及参数。研究成果弥补了规范在此方面的不足,可供高烈度地震区大跨度钢管混凝土拱桥抗震设计时参考。     

基于纤维梁柱单元的桥梁墩柱地震反应模拟方法研究

为讨论利用纤维梁柱单元进行钢筋混凝土桥墩地震反应分析的建模方法,分别以4个悬臂式单柱墩和1个双柱墩拟静力加载试验,以及1个悬臂式单柱墩的振动台试验结果为依据,基于OpenSees数值分析平台建立了桥墩的地震反应分析模型。通过改变单元数量,分析了基于力的纤维梁柱单元和基于位移的纤维梁柱单元对桥墩地震反应的模拟精度。结果表明:对悬臂式单柱墩的拟静力和振动台试验,可沿墩高仅建立1个基于力的纤维梁柱单元,并在墩底串联1个考虑纵筋塑性渗透和粘结滑移的转动弹簧单元,即可获得很好的模拟结果。当采用基于位移的纤维梁柱单元时,应沿墩高至少建立2个单元,且塑性铰区至少有1个,才能保证获得较高的模拟精度。对双柱墩拟静力试验,采用基于力的纤维梁柱单元建模,沿每个墩高建立2个单元即可;以基于位移的纤维梁柱单元建模,建议沿每个墩高建立3个单元,且其中2个单元布置在塑性铰区。当数值模型可对静力滞回曲线取得很好的模拟结果后,该模型一般可对动力作用下墩顶最大位移和墩底最大剪力进行较为准确的模拟,但对墩顶残余位移的模拟精度无法保证。